Update of the system of Microsoft

Similar Questions

• Windows Update blocks the system off, it

  I shut down the system, while it has been updated of the system (Microsoft Update). Now it crashes, saying that this update no. 11 of 13 is busy

  What should I do?

  The operating system is windows 8.1

  The system should be able to launch an auto repair.

  First you must do a full stop down to Win 8.1 as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  After that, you must restart the laptop... Usually the system would start an auto repair procedure that should solve the problem of update.

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Can I download and install some updates of the system?

  Here, it shows updates of the system are old and it shows the old version I have and it also shows the new version, so must I download the new version and download & install over versions old or not?

  * Pilot your worm last worm *.

  * USB-enhet (sammansatt) 6.1.7600.16385 NEW VERSION > 6.4.64.326 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2936 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - UPGRADE 2937 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2938 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2934 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2935 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2939 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB2 Enhanced Host Controller - 293 a 6.1.7600.16385 NEW VERSION > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB2 Enhanced Host Controller - 6.1.7600.16385 NEW VERSION > 8.3.1.1011 293C *.

  Where it is shown? What application will notify you of new updates?

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• Notification of update of the system

  How can I get rid of the update of the system of Xperia to Marshmallow in the notification bar without the updat? I use the last version of lolipop and not interested in the update for the moment and do not want to be constantly reminded.

  You cannot by default, you can erase data for the software update application, it will remove the notification, you must restart your device.

• Update of the system - will never spent 15%

  ThinkPad Edge E431; Windows 8.1

  I run Center solution and then system-> software updates. I then start the update of ThinklVantage system 5. It opens and when I start it, it goes for updates to the agent and stops @ 15% full not saying no applicable on the system package, it's whenever I do this. What prevents the update of the system function?

  THX

  I finally fixed it. I've been to download and re - install system update (after 5 attempts at installation). He now works and integrated into the solution Center.

• Win 7 SP1 - update of the system 4 start

  Hello

  I have a problem with the update of the system on one of our ThinkPad customers.

  When I try to start it, the splash screen is displayed and the suservice.exe process is started, but then nothing happens.

  I followed some of the tipps, I found in this forum (disabled UAC, checked registry entries, and so on) but without success.

  The behavior has not changed - update system shows the splash screen (if I click on the start the application stops responding, if I wait for the splash screen disappears after about 30 seconds)

  I also uninstalled the previous installed version of system update and installed the latest version (http://www-307.ibm.com/pc/support/site.wss/MIGR-73695.html) with the support of SP1.

  It would be nice to get the system update working again because the customer is having a strange problem on his thinkpad - perhaps connected to lenovo apps that aren't updated (start of programs to minimize maximize randomly). Uninstalling the lenovo Toolbox has solved this problem for now, but I want to assure you that the system is up-to-date.

  System information:

  Lenovo Thinkpad T410s

  Windows 7 Professional 64-bit with installed SP1

  I also got some log files:

  SUService newspapers:

  Info 2011-03-23 , 10:55:38
      at Tvsu.Service.Server.PipeManager.HandleRequest(String request)
      Message: Installing under the service context
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.Execute()
      Message: /execute uncsetting.exe /arguments "" /directory C:\Program Files (x86)\Lenovo\System Update /type COMMAND
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.Execute()
      Message: C:\Program Files (x86)\Lenovo\System Update
  uncsetting.exe
  ""
  COMMAND
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: Directory 1: C:\Program Files (x86)\Lenovo\System Update
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: If directory 1 exists: C:\Program Files (x86)\Lenovo\System Update
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: The parameters directory and command stay as follows:
  command: uncsetting.exe
  directory: C:\Program Files (x86)\Lenovo\System Update
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: hide window: False
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: 0
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Client.CommandLauncher.ExecuteCommandLine(String command)
      Message: Command execution duration was: 667 Miliseconds
  

  tvsu_exe.log:

  TSS(R) 2: 10:43:58:0779 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:43:58:0783 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:44:34:0494 tvsu.cpp(518): StartTvsukernel : admin
  TSS(R) 2: 10:44:34:0496 tvsu.cpp(525): Begin InvokeUacSdkViaService
  TSS(R) 2: 10:44:34:0707 tvsu.cpp(370): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:44:34:0710 tvsu.cpp(405): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:45:22:0927 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:45:22:0930 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:45:23:0751 tvsu.cpp(518): StartTvsukernel : admin
  TSS(R) 2: 10:45:23:0752 tvsu.cpp(525): Begin InvokeUacSdkViaService
  TSS(R) 2: 10:45:24:0330 tvsu.cpp(370): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:45:24:0333 tvsu.cpp(405): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:51:23:0804 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:51:23:0804 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:54:35:0071 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:54:35:0075 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:55:38:0884 tvsu.cpp(518): StartTvsukernel : admin
  TSS(R) 2: 10:55:38:0886 tvsu.cpp(525): Begin InvokeUacSdkViaService
  TSS(R) 2: 10:55:39:0523 tvsu.cpp(370): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:55:39:0524 tvsu.cpp(405): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  

  UACSdk.txt:

  TSS(L) 0: 10:44:35:0222 uacsdk.cpp(168): User: ADMIN
  TSS(L) 0: 10:44:35:0223 uacsdk.cpp(169): TempRegFile:
  TSS(L) 0: 10:44:35:0223 uacsdk.cpp(170): ComdLine:
  TSS(L) 0: 10:44:35:0224 uacsdk.cpp(178): ComdLine tvsukernel: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:44:35:0224 uacsdk.cpp(186): Vista admin
  TSS(L) 0: 10:44:35:0226 vista.cpp(62): StartUIOnVistaWithAdminLongon ComdLine: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:44:35:0226 vista.cpp(70): WTSGetActiveConsoleSessionId dwSessionId: 1
  TSS(L) 0: 10:44:35:0229 vista.cpp(74): WTSQueryUserToken failed!
  TSS(L) 0: 10:44:35:0229 vista.cpp(159): CreateProcessAsUser failed!
  TSS(L) 0: 10:45:24:0807 uacsdk.cpp(168): User: ADMIN
  TSS(L) 0: 10:45:24:0808 uacsdk.cpp(169): TempRegFile:
  TSS(L) 0: 10:45:24:0809 uacsdk.cpp(170): ComdLine:
  TSS(L) 0: 10:45:24:0809 uacsdk.cpp(178): ComdLine tvsukernel: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:45:24:0809 uacsdk.cpp(186): Vista admin
  TSS(L) 0: 10:45:24:0811 vista.cpp(62): StartUIOnVistaWithAdminLongon ComdLine: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:45:24:0811 vista.cpp(70): WTSGetActiveConsoleSessionId dwSessionId: 1
  TSS(L) 0: 10:45:24:0814 vista.cpp(74): WTSQueryUserToken failed!
  TSS(L) 0: 10:45:24:0814 vista.cpp(159): CreateProcessAsUser failed!
  

  ServiceStart.log is empty

  A possible solution can be found here

  Note of the moderator; edited the link to open in a new window

• Why my wireless stop working after the last update of the system?

  My wifi worked perfectly before the last update of the system.  Now, it will not register, but a bar of signal and nothing works.  How can I fix it?  Makes unnecessary internet on TV, because I have not a wired connection is close.

  My TV is a model NSX-46GT1.

• Cannot start Windows 7 after the update of the system

  I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

  AMD 7750 dual-core 2, 7GHz
  4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
  ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

  Here is the information about the error:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1026

  More information about the problem:
  BCCode: 116
  BCP1: 871F13D8
  BCP2: 90C204B4
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  F:\Windows\Minidump\080809-15375-01.dmp
  F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  F:\Windows\system32\en-US\erofflps.txt

  Here's the crash dump:

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.x86fre.win7_rtm.090713 - 1255
  Computer name:
  Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
  The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
  System Uptime: 0 days 0:00:19.343
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  .....

  Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I have a prob. in the update of the 7 3 microsoft service Pack

  I have a window clerk update prob a mistake in a pack of ser microft office 7. Please guide me what I do?

  Hi ashish_maniar,

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Problem with Windows Update on the system.

  I had to recently downgrade from Windows 10 to 7 due to some performance issues. Fortunately, I had the CD supplied with the notebook (Dell inspiron 15r purchased during the year 2011 model) for the installation of windows 7 was never really a problem. Now the questions is related to uptate windows function that updates the essential windows and related windows products. He said that the search for updates and pretty page that much like that. It seems there never be never so: no change that if I leave the laptop on for hours... Is there something that can be done to address this issue?

  Hello Ganesh,

  Thank you for visiting Microsoft Community.

  As I understood it, you encounter a problem with after downgrading 10 of Windows to Windows 7, Windows Update will not work on the system.

  Certainly, I understand your concern.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you run the Windows Update Troubleshooter to check if it works. Please follow the link given below.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Note: The troubleshooter above checks if the network card and Windows Update services work properly.

  If the problem persists, follow method 2

  Method 2:

  I suggest you to reset manually the update of Windows components. Please follow the steps outlined in the article below and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Now, you can try to run the Windows updates and check if the steps above to solve the problem.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Problems with the updates after the system recovery

  Hello.

  After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

  If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

  Someone knows what's the problem?

  Regards Terry

  Hello Terry,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on research.

  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'Windows Update'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, please reset the Windows update components and check.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you