update of troubles for windows vista.

Similar Questions

• Blue Screen installation updates (KB2419640) & (KB2478935) for Windows Vista

  I get the blue screen when I install the above, and this update was 12/01/2011 and continues to reappear after I restore the system to January 9. So I turned off auto updates but isn't this bad since I DON'T want to prevent remote control?  What can I do to fix these two updates. No blue screen before these updates, but as soon as I say yes to reboot on blue screen. What is a L1T (level a techie) to do. I need this computer until I get a job!

  Thanks to the intervention of Halima S... I'm ready to tackle this problem without restoring the system. My only concern is that this command deletes previous restore dates and that the option is permanently deleted. However, first I have to print the steps to follow for a clean boot and re-read. I will work from there... Still down thanks!

  Hi Apple2DellExperience,

  1. are you able to install some other updates on the computer?

  2. what was the message on blue screen?

  3. do you have security software installed on the computer?

  It is not recommended to disable the automatic update.

  These updates will be revived again after the system restore.

  I suggest that you manually download and install the update, check if it works.

  Also, make sure you disable all the third-party program installed on the computer during the update installation process.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Update security for Windows Vista (KB2419640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=13445E4A-099A-4EDD-864E-C44F42940500&displaylang=en

  Update security for Windows Vista (KB2478935)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4EEAAD20-729C-4594-8853-E4AE55E9D491&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2419640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=FD6B806E-50D4-4F4D-96E1-7C71FCA4C543&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2478935)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=B2839CD0-1958-4A22-9AAC-0E0AA8F2B52C&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 8007371B when installing the update of security for Windows Vista (KB978886)

  Update for Windows Vista (KB978886) security fails to install on my computer and I get this error code: 8007371B.

  I use an Acer with Windows Vista Home Edition SP 2.

  Can someone help me?

  Thanks in advance

  Title of contempt, but other things that you can try are:

  http://support.Microsoft.com/kb/947366#resolution3

  http://support.Microsoft.com/kb/947366#resolution4

  Have you tried the standalone version of the software update and run the tool. Now it's time to check if something is the cause of the problem for example security applications or other programs.

  TaurArian [MVP] 2005-2011 - Update Services

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot download the update of security for Windows Vista KB3168965

  I seem to have a problem downloading update security for Windows Vista KB3168965. Windows Update crashes when it tries to download, and when I try to download it manually from the Microsoft Web site, nothing happens. Anyone know what goes wrong?

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-update-just-spins-and-spins-seemingly/0b7fc1fb-6425-4429-8987-eb81323331ec

• How can I fix error code 8024AFFF for update of security for Windows Vista?

  Update for Windows Vista (KB2412687) security will not install because of the error code 8024AFFF.   How can I fix this problem?  This update is essential to safety & operation of my computer?

  Hello

  Please follow the steps below.

  Method 1:

  Step 1:

  Put the computer to boot.

  Click on the link below

  http://support.Microsoft.com/kb/929135

  NOTE: after you have successfully installed updates, restore the computer to start as usual (see step 7 link mentioned above)

  Step 2: Manually, try to install updates from Microsoft Download Center.

  a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Microsoft Download Center

  http://www.Microsoft.com/en-us/download/default.aspx

  Method 2:

  Run the Microsoft fixit from the link below.

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/2509997

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

  Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

  Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

  My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  Try to download the update and save it to your desktop

  Close all windows/Applications

  Right-click on the file and select run as administrator

  If that fails, run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

• Windows Vista update: platform supplement for Windows Vista update: KB2117917-french

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hey Urdethismylife

  Try the repost in the forum for this windows update

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Installation problem: other updates and security for Windows Vista (KB981852)

  In my history of update, this update shows as installation again and again "with success" since August, but he is still listed as an update to install.  This also applies to Windows Vista Service Pack 2 (kb948465), who has reportedly updated several times and still is listed as an update.

  Some info: I'm currently using Norton 360 - like Firewall and antivirus.  I also run Spyware Doc.  I was attacked last year, computer failed and I had to wipe my computer. (Assistance with this manufacturer.)  I'm not sure it solved the problem.  Since then, I have had problems with the computer running the browser to leave/run slowly, slowly, the problems to open programs.  This may be due to the loop of 'Windows update '?

  Thanks for any help.

  Hi Silk_Tea,

  First let's start with the question of the update of Windows. You can read the following article and try the steps and check whether you can solve the problem or not.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer will not install the update of security for Windows Vista (KB2688338)

  The update starts normally say "create a restore point. Then he said: "some updates were not installed.

  I get the error code is:
  Code: 80070002

  Here's a good link for the specific error code you get:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• Recently, I did the update of security and had 17 updates to install for Windows Vista Home Premium SP2.

  Recently, I did the update of security and had 17 updates installed.  After installation I closed the computer for the day.  The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept getting error code 0 x 81 different whenever it restarted.  The first 4 digits are the same with the rest changing with the exception of the 79 at the end.  So far he has done about 30 times until I finally stopped him frustration.  Also sometimes it would ask if I wanted to check on the web for a fix, but he continued the loop.  The loop stops at different places during the boot sequence.  Once he got almost completely before it restarts and a couple of times, it was in the screen of welcome and rebooted.  Is there a fix or do I have to do a clean install?  The way it is now I'm not sure that I can make a back up of my wife's Family Tree Maker files and get it all.

  1. try to restore the system and if necessary a startup repair.

  2. data recovery.

  3. where questions of Windows updates.

  1.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Update Error 80070002 for Windows Vista 64-bit w / SP2 installed

  I have experienced all the steps that I found online, that it is:
  Stopping the service, delete the file and restart the service
  Microsoft Fix It program, run twice
  Analysis of Microsoft tool used, meanwhile I wonder to download and install the hotfix for Windows (KB947821) but always part of the track stops by and never completely finished.

  I'm at my wits end here because I'm starting to think that the only way to fix this is a complete system recovery.  If anyone can offer advice more or may show something I'm doing wrong please.

  Thanks in advance.

  Only a clean installation may solve your problem.

  If you don't want to "take any chances", do so now.  If this isn't the case, physically disconnect the computer internet until you have time to do.

  Good luck.

• Update cumulative security for Windows Vista for Internet Explorer 8 (KB982381)

  Recently I got a virus and believe that some of my system files are corrupt and preventing this security update. Technical Assistant at Microsoft suggested I reinstalled Vista from DVD that I have that Vista to preinstalled with my laptop. All that I can do a reset?

  Wednesday, July 7, 2010 23:30:23 + 0000, dsykes72 wrote:

  It was a fake antivirus,

  What was his name?

  Removed to Malwarebytes scan, but I did a check of my hard disk without error.

  So why do you want to reinstall Windows?

  Yes, I have the hidden partition on my laptop, it is a mark of Acer.

  He will restore my registration?

  When you perform a clean reinstall, it allows to rebuild the registry of
  zero. But it is not delivered what was there.

  If I do not bother I always new updates of security,

  Sure.

  It's for Internet explorer 8 and I prefer this browser to others.

  Ok.

  And I will have to install all the updates again if I reinstall the system.

  Yes. You need to reinstall everything- all the updates, all the
  programs installed, all your data files (that you must first
  back up and save on an external support).

  Reinstalling Windows is a lot of work, as I said before and in my
  view should never be done except when absolutely necessary.

  Here's an excerpt from my standard post on this topic:
  You must restore all backups of your data, you must reinstall all
  your programs, you must reinstall all Windows and application
  updates, you must locate and install all the drivers needed to
  your system, you must recustomize Windows and all your applications to work
  the way you are comfortable with.

  In addition to all these things being long and painful, you can
  have trouble with some of them: you will find all your CDs application?
  You will find all the necessary installation codes? Do you have any data
  backups to restore? Do you remember yet all customizations and
  tweaks can be installed to make everything work the way that you
  as?

  So, again, sometimes must do. But if you do not have
  to, I highly recommend that you do not have.

  Ken Blake

• Problems with the Wi - Fi after installing the update of platform for Windows Vista (KB971644)

  SIGH... I installed the above for Vista windows update... as soon as the PC rebooted I was unable to get a wireless connection. I looked in the networks and connections in wireless and Wireless Manager is enabled. Im having to use the cable at the moment but very annoying sound... could you please help me? It also seems that things have slowed down? SIGH

  If anyone is still having this problem please post after try the following.
  Remove the update.  To do this, click Start > Control Panel > uninstall a program > (on the left side of the window), click on "View installed updates" and then select the update and uninstall.

  Then you can run Windows Update and then right-click on the update of the list and hide the update.

  Restart and then go to the website for the manufacturer of the adapter wireless to your PC and update the driver.

  After updating the driver and restarting the PC run Windows Update, select the hidden restore and KB971644 updates.
  Then, install the update and test.

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.