Update the BIOS for AMD switchable graphics card?

Hello

Please confirm my decision to come to update my system bios:

It seems that this may allow it to configure switchable graphics card AMD?

Thank you for your time

UPDATE: I'll be following the following guide for the update of the BIOS, please confirm if this is wrong.

http://support.HP.com/us-en/document/c00042629

------------------
System Information
------------------
Time of this report: 3/29/2014, 14:04:47
       Machine name: AKBAR
   Operating System: Windows 8 64-bit (6.2, Build 9200) (9200.win8_gdr.130301-1803)
           Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
       System Model: HP ENVY m6 Sleekbook
               BIOS: F.02
          Processor: AMD A10-5745M APU with Radeon(tm) HD Graphics   (4 CPUs), ~2.1GHz
             Memory: 6144MB RAM
Available OS Memory: 5338MB RAM
          Page File: 1873MB used, 5964MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
 System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.02.9200.16384 64bit Unicode

------------
DxDiag Notes
------------
      Display Tab 1: The file aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL).  You may be able to get a WHQL logo'd driver from the hardware manufacturer.
        Sound Tab 1: No problems found.
          Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
          Card name: AMD Radeon HD 8610G
       Manufacturer: Advanced Micro Devices, Inc.
          Chip type: AMD Radeon HD 8610G (0x990F)
           DAC type: Internal DAC(400MHz)
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_1002&DEV_990F&SUBSYS_1995103C&REV_00
     Display Memory: 3150 MB
   Dedicated Memory: 737 MB
      Shared Memory: 2413 MB
       Current Mode: 1366 x 768 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: unknown
         Monitor Id: AUO32EC
        Native Mode: 1366 x 768(p) (60.016Hz)
        Output Type: Internal
        Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1267 (English)
     Driver Version:
        DDI Version: 11
     Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
       Driver Model: WDDM 1.2
Graphics Preemption: DMA
 Compute Preemption: DMA
  Driver Attributes: Final Retail
   Driver Date/Size: 3/12/2014 09:10:42, 1329352 bytes
        WHQL Logo'd: No
    WHQL Date Stamp: None
  Device Identifier: {D7B71EE2-DA4F-11CF-7F77-9F39BEC2C535}
          Vendor ID: 0x1002
          Device ID: 0x990F
          SubSys ID: 0x1995103C
        Revision ID: 0x0000
 Driver Strong Name: oem25.inf:cb0ae414d605de39:ati2mtag_Trinity_Mobile:13.350.1005.0:pci\ven_1002&dev_990f
     Rank Of Driver: 00E02001
        Video Accel: ModeMPEG2_A ModeMPEG2_C
        DXVA2 Modes: DXVA2_ModeMPEG2_VLD  DXVA2_ModeMPEG2_IDCT  DXVA2_ModeH264_VLD_NoFGT  DXVA2_ModeVC1_VLD
   Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
       D3D9 Overlay: Not Supported
            DXVA-HD: Not Supported
       DDraw Status: Enabled
         D3D Status: Enabled
         AGP Status: Enabled

-------------
Sound Devices
-------------
            Description: Speakers / HP (IDT High Definition Audio CODEC)
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76E0&SUBSYS_103C1995&REV_1003
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: stwrt64.sys
         Driver Version: 6.10.6466.0000 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 3/13/2013 03:54:28, 546304 bytes
            Other Files:
        Driver Provider: IDT
         HW Accel Level: Basic
              Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
 Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

---------------------
Sound Capture Devices
---------------------
            Description: Internal Microphone Array (IDT High Definition Audio CODEC)
  Default Sound Capture: Yes
  Default Voice Capture: Yes
            Driver Name: stwrt64.sys
         Driver Version: 6.10.6466.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/13/2013 03:54:28, 546304 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF

            Description: Stereo Mix (IDT High Definition Audio CODEC)
  Default Sound Capture: No
  Default Voice Capture: No
            Driver Name: stwrt64.sys
         Driver Version: 6.10.6466.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/13/2013 03:54:28, 546304 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF

-------------------
DirectInput Devices
-------------------
      Device Name: Mouse
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: Keyboard
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: HP Wireless Button Driver
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x0001, 0x0001
        FF Driver: n/a

Poll w/ Interrupt: No

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x1022, 0x7808
| Matching Device ID: USB\ROOT_HUB20
| Service: usbhub
| Driver: usbhub.sys, 4/27/2013 19:58:12, 496872 bytes
| Driver: usbd.sys, 4/27/2013 19:58:12, 21736 bytes

Hello:

There is no graphics card AMD switchable for my model, even with a BIOS update.  That is right.

Or is it still be grayed out as in the current state.  That is right. An update of the BIOS will do nothing to allow you to change the graphic memory settings.  Everything will be grayed out as before.

So if I overload a game settings, from the middle to the extreme, this means that most of the 3 GB memory graphics will be allocated to catch the game? Or even will not use the 737 MB dedicated?   The laptop will initially use all the dedicated memory.  If that wasn't enough, he will then consume the maximum (2.4 GB) memory system available and put it to the chart.

Tags: Notebooks

Similar Questions

  • Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

    Original title: error message

    Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

    Hello

    Update the driver may solve the problem. See the following article to install/update the drivers.

    Update a hardware driver that is not working properly.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

    http://support.AMD.com/us/gpudownload/pages/index.aspx

  • Update the BIOS for Satellite U400-10O required

    Hello world

    I have a SATELLITE U400-10 oC (PSU40E-00R00EG3). It is an old product, but once I always love use regularly.

    Recently, I bought a battery for this device upgrade. Unfortunately, it does not recognize the laptop. The work of the battery, but I don't you all information about the charge level. I tried various tricks 'reset' (removing ACPI Microsoft in the list of the drivers installed, running down the battery completely etc..).

    I think the BIOS might be exceeded and I'd like to update. Unfortunately, the Web of Toshiba site does not list updates for him more. Still, someone has access to updates the BIOS for this?

    The BIOS is a Phoenix currently to version 4.70.

    Hello

    N my BIOS of opinion has nothing to do with it. Battery can be replaced, and if you use compatible batteries they should be recognized correctly. Here is the list of all compatible batteries:
    PA3534U-1BAS/BRS
    1BAS/PA3536U-1BRS
    PA3634U-1BAS/BRS
    PA3635U-1BAM/BRM

    Purchased one of these and original Toshiba product (label Toshiba) or a product without a name?

  • Update the BIOS for HP Pavilion M9400f

    PC desktop, HP Pavilion Elite 9400F

    Windows 7 64-bit.

    Error message: Incorrect for your system (253) Bios please contact support.

    I use the bios upgrade HP site says to download for my PC, but the upgrade works only with a card mother M2P61PM-HM.

    Mine has a motherboard M2n68-(NARRA3) and the latest bios for this motherboard does not support Windows 7 and is abandoned.

    My system black screen constantly when out of mode 'sleep' and upgrade the bios addresses that issue.

    Try to use the BIOS Nettle3 update on the card mother Narra3 will cause problems. Most of the time that BIOS HP update routines is written for a specific operating system and will not install on other operating systems.

    Make sure you use the update of the correct M2N68LA BIOS for your motherboard Narra3, several different versions of the M2N68LA were made (narrated, Narra3, etc.)

    Please put back the computer it's original Vista OS to install the M2N68LA (Narra3) update of the BIOS. After you install the update, you can return the system to Windows 7. Make it easy and not lose all personal data, disconnect your Windows 7 drive and a blank disc. Using the recovery DVD, install Vista. Update the BIOS. Disconnect the Vista disc, and then reconnect the player to Windows 7. You should be good to go.

  • Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

    Hi all

    I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
    The version of the system BIOS is v1.30
    I want to Flash the BIOS for you last version v2.0.
    This version is released in January 2009, before the introduction of Windows 7.

    There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
    I think I have to go to the operating system independent.
    Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

    Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

    So here's my question: this BIOS version is compatible with Windows 7?

    Thank you very much!!

    AJ.

    Hello

    I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

    But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

    Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

    Back to BIOS update:
    In your case I would try not to update the BIOS if the laptop works properly.
    Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

  • Question of updating the BIOS for Qosmio F50 - 10 k

    Hiya:

    + This Bios update adds functionality to your system. +
    + (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard. +
    "+ When the computer turns on, the BIOS is launched to perform various functions to start). +

    + For detailed updated information, please refer to Toshiba-setting to update BIOS Information +.

    + Toshiba - 2.00 - WIN32 Qosmio F50 +.

    It will work on toshiba F50 - 10 k, Windows xp, sp 3?

    [Notebook-> Qosmio-Qosmio series > F-> Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]

    Post edited by: kirekk

    Qosmio F50 - 10 k belongs to the series of PQF55E.
    If you want to update the BIOS, you will need to use the BIOS exactly for the F50 PQF55E series.

    The European driver Toshiba page provides BIOS for Vista 32-bit and 64-bit OS.
    But this does not mean that you cannot use the Win XP

    I think you can use the Win XP but the fact is that the BIOS has been optimized for Vista and not XP

    The BIOS update should work also on XP, but in some rare cases the update cannot be performed and in this case, you will need to the Toshiba preinstalled the operating system in order to update the BIOS

  • Question about updating the BIOS for Qosmio G20

    I downloaded the updated the BIOS of my pc, not the Qosmio, the instructions say it will unpack into 3 files, one being a floppy disk installation. When I unzip on my desktop pc, it makes a file that s too big for a floppy and he won t unzip further because it locks up my pc.

    Is it safe to make it work on my desktop pc it can unzip then in the three files and this will affect my BIOS or y at - it somewhere that I can download the floppy part on its own to load on a floppy?

    Hello

    Just a question;
    You have downloaded the Qosmio G20 BIOS on the desktop computer, unpacked and now you want it please on the diskette in the floppy drive.
    Is this good?

    So now my suggestion;
    Firstly that the Qosmio G20 BIOS and other BIOS Toshiba cannot be updated using the floppy! This isn't traditional BIOS!
    The BIOS from the Toshiba page must be updated when the Windows operating system is running!

    By the way: you can unpack the BIOS on your desktop computer, but don t try to run all files, because the bad BIOS can damage the motherboard ROM module!

  • Satellite A110 - update the BIOS for Windows 7?

    Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
    01/21/09
    Update the BIOS
    Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
    01/21/09
    Update the BIOS
    Toshiba OS independent 2, 00 - WIN World Wide

    In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
    My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

    My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

    Hello

    > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
    You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
    So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

    If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

    Welcome them

  • Update the BIOS for HP Pavilion a767c

    Updates to the BIOS for HP Pavilion a767c

    Is there a question here? The a767c of HP is circa 2004. The only known BIOS update was published in 2006.

     
  • Inspiron 15R (5520)-"Defective keyboard" and "defect with the 1 GB AMD radeon graphics card".

    inspiron 15R(5520)
    
    Problem wid the 1gb AMD radeon(HD 7670 M) Graphic Card and some keyboard keys. Graphic card is not identified. shows in Device manager but dosen't work. I have problem wid some of ma keyboard keys. I have to tap it twice or thrice to write.. Called up da customer support many times but no good response... I'm really exausted, Plz help...
    

    Hi Jelena,

    Sorry for the delay. If the operating system was already reinstalled and the scan of the PC came with an error, the video card will be replaced. Please click on my username and add me as a friend. Please provide the number of service system, the owner's name and contact number by only private message. I check the details of the system warranty and help you with this question.

  • Question about updating the BIOS for Satellite M70 (PSM71)

    Hello!
    On the download page, there is an update of the bios 08/07/07 - 1.50 - WINNER, but I already have this version, y at - it a mistake? This version in the old...

    Thank you!
    Ciao!

    Hello

    On the download page, there are two BIOS available for your laptop model:
    -1.50 aged and
    -new 5.10 and this one are designed for Vista.

    If you want to install Vista on your Satellite do BIOS update first.

    All that s!

  • update the BIOS for Hp 1000 1111tu

    I have 1000 Hp 1111Tu notebook and I want to update my BIOs, but I'm afraid it will damage my notebook.please teach me the steps in the order that will not harm my motherboard. Thanks for the solution

    Hi b4t4v1a and welcome to the HP Forum!

    I understand that you want to update your BIOS on your laptop to HP 1000-1111TU. I'll try my best to help you with this.

    In this document are steps that guide you through the update of the BIOS. Be sure to follow the steps to find the right update for your computer.

    I hope this information is useful, please let me know the results.

    Good luck and have a great day!

  • Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

    Hello

    I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

    Any ideas?

    Hello!

    Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

    A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

    However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good bye

  • Question about updating the BIOS for satellite P100-313

    I want to update BIOS on my laptop. I tried to the Toshiba support for the update page and there are two different versions: 4, 00 - Win and 1, 40 - win. Both versions are from 09/07, but I have no idea of the version of the wich I'm supposed to choose. Could someone help me please?

    Thank you very much in advance

    Lukas

    Hello

    I agree with Andrew. Think twice before you take BIOS update. Is there a reason to do the update of the BIOS? Have you noticed a strange behavior with your laptop or the reason must be updated?

  • Increase the space for more hot graphics card

    I asked a few questions about this... but I was not specific enough. My computer: HP Pavilion Elite m9060n; ZOTAC GeForce GTS250 1 GB graphics card. I made the space for this double-card slot; and upgraded POWER of Antec 650W PSU.  When mounted, the graphics card is quite close to the above TV tuner card... I can move the tuner card to a location that puts it above the PSU, but allows generous space above the graphics card. The Tuner card generates a lot of heat? It would be a wise move? I asked a similar? but referred to as a 'video card' tuner card... a different animal... excuse my bad, my intel severely limited.

    Hello

    I have the drive Bay multimedia Pocket, Personal Media Bay, two hard drives, power SUPPLY Corsair HX 650 block (extra long cables), Media Player and the NVIDIA GTX 460.  Everything fits. The cables are a little squished but otherwise it's okay.

    My firm works on the edges of the top and the PSU's fan mounted to the top, as was the original power supply.  Otherwise, my firm is the same size as yours.

Maybe you are looking for

  • Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

    10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport

  • GeForce FX 5700 or higher

    Does anyone by chance know what Toshiba machines equipped with a 5700 + FX? I currently own a M30, which is nice, but when it comes down to current games, the rates are a bit too weak to survive in MP :( Thanks guys,. da King.

  • Scope of bad wifi - iPhone 6

    Hello world I disappointed in my wifi range. I have android phone and it can connect to the same wifi access point wifi signal is poor at the same time my Ip can not connect to it even all two phone in the same range. Please help me if you know any s

  • SG300 remove user via cli

    Hello. Hello I would like to remove users using cli commands. My firmware is 1.4.0.88. My thought was something like: should work but does not work. What I am doing wrong? -fuz

  • NET 3G not detected by windows 8 Apps

    When I connect internet via 3G dongle, windows 8 app doesn't always say no internet connection while all things office will work perfectly. What can be the solution?