Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

Similar Questions

• Error: Size of the ROM file is incorrect, as the update of BIOS on satellite A200

  Dear Sirs,

  I tried to update my bios on satellite A200 and then I start the update it says "the size of the ROM file is incorrect.

  Can someone help me with this?

  What should I do?

  Hi Stavros

  I think I can help you.
  I remember this error message. Some of the users of the forum have posted a solution.

  For example here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=112057𛖹

  It seems that it s not a serious error is displayed because the BIOS file was not properly extracted.

  Good bye

• Update the BIOS of the A110 to satellites--> the size of the ROM file is incorrect

  I tried upgraing BIOS download from Toshiba site but error message.
  The size of the ROM file is incorrect - suggestions for moving forward.

  Hello

  Today, it seems it's your lucky day...
  Have looked into the Toshiba, basic knowledge about the Toshiba support home page and found this FAQ document:

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It should help you

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Tecra A6 - update BIOS - "the size of the ROM file is incorrect.

  Hi, I was sent this link to download a new BIOS
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=60307&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8

  But when I try to use set up, I get an error message that says: "the size of the ROM file is incorrect" and it doesn't let me move forward. How can I, please?

  Paul

  Hello

  Maybe this article can help you http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm

  Good bye

• Satellite P10-304-DVD-ROM/CD-RW questions!

  Hello world

  I own one of the original computers Satellite P10-304, which has a DVD-ROM/CD-RW combo drive. For these last months, we have one or two problems with that. It was a little skittish in which CD it reads, but in the last days he almost completely stopped read correctly (audio/data) CD / DVDs. He doesn't seem to know they are there. However, the Player opens and runs well, as if it were playing the CD, but nothing happens on the PC.

  Curiously, I then looked on the list of the system, and the DVD-ROM/CD-RW driver had an excalamation mark. Even more curiously, the pilot was called TOSIICA! DWD something or other, when I'm sure it should have been DVD TOSHIBA etc.etc. Following the instructions, I uninstalled and then tried to reinstall, but it does not appear now when I try to add hardware.

  Confusing.

  I would be very grateful if anyone has any suggestions?

  See you soon,.

  Ian.

  Hello

  It looks like a car damage registry entry.
  But that is only my suggestion. The other possibility is broken (lens calibration problem) by car.
  You say that you have already removed the drive from the Device Manager, but the peut t OS recognizes the drive again. Well, in this case one of the possibilities is to use the System Restore tool or retrieve the device with the recovery CD.
  But if the drive is broken recovery procedure doesn t help. In this case, only the replacement of the drive can solve this problem.

• Satellite A200 - 1BW PSAECE: update BIOS: size of Rom file is incorrect

  Hello
  I tried to update the bios from the Web site.
  But when I flash, it is said that "file size Rom is incorrect and does not update to the Bios.

  How can I sort this problem?

  First question:
  Why do you update the BIOS?

  The update of the BIOS is not necessary if the laptop works properly!

  But back to your problem.
  Found a solution and an answer why the error message: size of the Rom file is incorrect is displayed:

  Check this box:
  + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
  + I always receive following error message: the size of the ROM file is incorrect. +
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  Good luck

• Satellite P10-304: the problem writing and erasing CD - RW discs

  Some need help pls. I own a Toshiba satellite P10-304 with a combo player SD-R2412 installed. When I try to burn a new CD - RW, it does ok, but wouldn't allow no other written on the same CD in another session. The written CD - RW is then recognized as a CD-ROM. In addition, it is not possible to erase the cd - rw usinig this player. When I take the cd written for my laptop office of deletion, as it's done with success and my toshiba can then burn again. Any ideas on what to do?

  Additional information: laptop computer came bundled with "drag n dro cd" but I had to install Roxio and even tried the cd writing software provided with windows XP are done everything to nothing. I checked the 'advanced system info-error log' and the report there is 'the device, \Device\CdRom0, has a bad block'; I don't know what that means.

  Cheers.

  Nthunderbolt

  Hello

  In my opinion, it's probably caused by software. In my opinion, you should remove all burning software and verify all burning functions with windows option. After deleting some software, it can happen that, in the registry editor it is a lot of waste that will not be removed completely.

  In any case, delete all the burning software, and you can also try to remove the device from Device Manager DVD. Restart the laptop and DVD should be detected and installed correctly. Try using the option of engraving of Windows and if there is still problem writing once again please.

• What are the cards Wi - Fi are compatible with the Satellite P10-304?

  Hello

  Please can someone tell me what mini-pci Wifi cards are compatible with the laptop Satellite P10-304?

  I tried a broadcom 4318 with no look.
  It installs the material as seen in the Device Manager, but can not find all the networks (think there is a conflict with the motherboard)

  Tried an AW-GM100 Azure that has a conflict as soon as the computer message cell phone messages.

  As in advance

  Mark

  Hello!

  Theoretically, most of the WiFi cards should work, but the best way would be if you take a WiFi card that was delivered with a computer laptop Satellite P10.

  I put t know what cards shipped with this laptop, but I have a little search here in the forum and I have created a thread that might be interesting for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23749

  Good bye

• Satellite P10-304: replacing a WLan card - can I the same WiFi chip?

  Hi all

  got a satellite P10-304 of a companion here.
  He said the free thread never worked on it and hes had it years and someone else has already looked at and changed the TNA wireless card.

  Basically, she acts only as the wireless switch does not work and it remains permanently off the coast, although the drivers install correctly and map also shows ok. Simply disconnected.

  Now, I thought, okay, I'll take a look because I'm pretty good on the old hardware. Has taken apart and this you know, switch has been bent and not up. I handed the place, checked the switch and stop positions with a multimeter to check the switch worked and he was doing his job perfectly.

  Now it still doesn't.
  I guess it is now due to the fact that as I said, the map has been changed since its origin to a processor intel pro jobby.

  My question is, I'm right, do I just need to get the same card that was originally in it. I assumed that when the switch is set correct return, that I solved it.

  Hello

  The WiFi card must be activated bu switching the switch TO the position (the LED must illuminate) and in addition, you should choose the WLan antenna using the FN + F8 key combination.

  Please check this!

  Notes; go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi is enabled as well.

• Satellite P10-304 - the card WiFi mini pci can add?

  Hello

  I have a Satellite P10-304.
  I would like to add a mini PCI Wireless.
  Can someone tell me one would suit this machine.

  Thank you

  Do you see black and white antennas near the Mini PCI Slot?

  If this isn't the case, then you can not install a Wifi card. He won't get any reception. You get a USB Wifi instead.

  If you have the antenna, Intel 802.11bg card (2200BG) should work. http://www.Intel.com/support/wireless/WLAN/pro2200bg/

  Its a good idea to buy the card from Toshiba (via an ASP) since the Wifi card can be modified to work correctly in the P10.
  If you buy a generic MiniPCI Wifi card, he can switch Wifi does not work properly.

• Satellite P10-304 - update Windows 7 problem

  I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

  I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
  Downloaded the stand-alone Windows Update.

  Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
  All this without success.

  My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

  Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

  Help is welcome.

  Peter

  I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

  From my point of few, you should check the Microsoft support pages to find the solution.
  For example this:
  http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

  Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
  Missing Service Packs might concern the single installation of patches.

• Want to upgrade RAM HDD & on Satellite P10 - 304

  Help, please

  I have a Satellite P10-304. There is only a tiny 256 RAM and 30 GB hard drive.
  Can I put both?

  I was looking to upgrade to 2 GB ram at least and 120 to 160 GB of hard drive.
  Looked at the pc world, I know not which is compatible with mine.

  Thank you

  Hello

  Of course you can upgrade this P10.

  The RAM can be upgraded up to 2 GB and you use PC2100 DDR - RAM modules.

  I think that the laptop supports the HDD IDE ATA-5 and in my opinion, you would be able to update with 100 GB or 120 GB HDD

  Concerning

• Satellite P10-304 power until now

  Hello

  Got the machine Satellite P10-304, which won't turn on after the 2nd attempt. What happened: -.

  Machine power of cold - booted Windows XP ok start. After 5-10 minutes, the machine screen is dimmed (resembles backlight is gone) and couldn't turn off the machine by pressing button, so had to remove the battery to kill machine power.

  Now machine won't turn on (same battery fully charged), when I pressed the power button, I get a light flashed orange once inside the circle of blue light around power button / stop.
  Leave the machine shut down for about an hour and machine started in the BIOS screen, then after 3 minutes the screen is dimmed. Machine unbootable. Checked AC adapter and get 19.3Volts and 6.1Amp for power unit ok.

  Looks like the motherboard plays up and needs to be replaced? Dose - that someone has encountered this problem before?

  Thank you very much

  Hello

  > Sounds like the motherboard plays up and needs to be replaced?
  Yes, it seems so :(

  Maybe it s not the motherboard, but another part of the material. But to be honest, you should go to an authorized service provider. Technicians can check the laptop to determine what the problem is exactly.
  And here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Welcome them

• Satellite P10-304 - memory upgrade

  Hello

  could someone tell me where to buy additional memory for my laptop?
  It has 256 MB. At the time were reading autour is better and possible to just buy a 1 GB and remove 256 and put in the same dwelling.

  Thank you any help welcomed.

  Hello

  Satellite P10-304 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * modules.

  It seems that it would be possible to upgrade to 2 GB RAM max and that's why you can use 2 x 1 GB modules.

  Welcome them