Update the BIOS on a Satellite 1800-314

Similar Questions

• Impossible to update the BIOS on my Satellite A660

  Hello, guys!
  When I try to update the BIOS on my laptop in version 2.3 (latest version 1.6) I get the message "install UEFI winflash 0.02:

  + The program will be closed! +
  + There is an error occurred, please check below Articles. +
  + The BIOS above 230 version. +
  + More than 20% of battery capacity. +
  + Is attached AC. +

  The conditions of the first and the last are rooms but the second is not because the battery is dead (always 0% charged). Is there another way to update the BIOS?
  Thank you!

  Post edited by: al_3

  No, there is no other update BIOS because victory BIOS update version is available on the Toshiba driver website.

  I guess you need good work and battery charge in order to update the BIOS.

  But why you want to update the BIOS? Is something wrong with the laptop?
  The update of the BIOS is a very serious update and must be done very carefully
  Incorrect procedure may damage the motherboard!

• Impossible to update the BIOS on my Satellite L750-1MD

  Hello!

  I want to update my BIOS which is v.240 now. I DLed the latest version at the official site (311 I think).
  I did pay attention to the numbers when I select one for my laptop.

  When I try to update it - it begins to do message not not to have apps on and not restart or put in hybernation appears and then it stops. Then he tries to launch windows - W 7 Edition Home Premium, and windows once, everything becomes a black screen with a cursor.

  Cursor can me moved but it lost during 10 minutes there.
  After that I had to reboot to get rid of the black screen. I tried again later.
  Same result. And I checked my bios version - there are still 240. :(

  What should I do? Thank you!

  Hello

  Before you run an update of the BIOS, the antivirus and other security applications must be disabled. Also, make sure that nothing is running in the background.

  In addition the VAP (value added package) must be installed. I recommend the update to this package too.

• Satellite M60 - cannot access the HARD disk but update the BIOS

  Hello

  I want to update the bios on a Satellite M60
  the problem is that I can't access either on my hard drive it still reboot

  So, first I want to try to update my Bios but as I can't work with windos XP I need to do it with a Dos command.

  is there any solution for this?

  Thank you very much

  and why you want to update the BIOS?

  Even if the BIOS is not updated, the laptop should work well and should start the Windows operating system.
  This means that the problem with your laptop is unrelated to the old version of the BIOS.

  Have you tried to check the HARD drive or to reinstall Win XP?

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

  Hi all

  I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
  The version of the system BIOS is v1.30
  I want to Flash the BIOS for you last version v2.0.
  This version is released in January 2009, before the introduction of Windows 7.

  There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
  I think I have to go to the operating system independent.
  Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

  Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

  So here's my question: this BIOS version is compatible with Windows 7?

  Thank you very much!!

  AJ.

  Hello

  I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

  But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

  Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

  Back to BIOS update:
  In your case I would try not to update the BIOS if the laptop works properly.
  Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?

• Satellite Pro A60 - update the BIOS without OS

  I have a Satellite Pro A60, trying to install XP pro but says he needs the BIOS update, downloaded the new update, unzipped and that one file, will not start until no bootable files.

  There is currently no OS on the laptop, I understand that I need an ISO file but where is she... !...

  Hello

  Why you need to update the BIOS?
  I doubt that XP installation says that you need to update.

  Normally the update of the BIOS is a bit risky and must be that if she of really necessary. In addition the update of the BIOS can only be done from Windows. There is no DOS version, they available only authorized for service providers.

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• Satellite A215-S4817 - update the BIOS

  Hi, I'm trying to find the update of the BIOS for a Satellite A215-S4817. I tried several BIOS updates for numbers of similar but not exact model without success.

  In addition, this Web of Toshiba site does not recognize my serial number, and it cannot complete the application auto-defaut either. Maybe I have a more serious problem? The real problem is that my laptop will crash occasionally (screen goes completely black), but a hard restart to fix it. I was told I need to update BIOS, but maybe I need something different.

  Thanks for your help!

  > I'm trying to find the update of the BIOS for a Satellite A215-S4817. I tried several BIOS updates for numbers of similar but not exact model without success.

  It is a series of Toshiba laptops we.
  The BIOS can be downloaded from the Toshiba driver page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  > In addition, this Web of Toshiba site does not recognize my serial number and he cannot complete the application auto-defaut either.
  This happened because this is a Toshiba US series and this site is for Europeans portable Toshiba!

• Satellite A300D-125 - cannot update the BIOS

  Failure of the update of the BIOS for Toshiba Satellite A300D - 125 PSAK4E (2, 80-WIN32 to 3.10 - WIN32).
  The source that I tried to level is 30/04/09 dated dated http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fbios-20090430094605.zip

  Screenshot available for more information futrher.
  http://img12.imageshack.us/img12/6567/biosupdatefail.jpg

  Please help thanks.

  Also can someone tell me what's new in 3.10?

  Hey Buddy,

  For your model laptop is not a BIOS version 3.10.

  If you are looking for on the site of Toshiba Satellite A300D and PSAK4E model number, you can download the version 2.80.
  Version 3.10 is for other A300D models!

  You can check this on the Toshiba site and then stop to update BIOS please. You can destroy the ROM module

• Satellite A40: How update the BIOS because I only have half of the Bios

  Hi guys

  I went to the local with my satellite A40 computer store because I only have half of the bios!
  I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.

  Why not? What are the risks in need to know.

  Please help me because I want to in the future might be upgraded to vista?

  Hello Daniel,.

  I'm a little confused about your message from Mr.
  What do you mean with half of the bios is enough?
  What s wrong with the BIOS?

  The support from Toshiba said-> try a BIOS update.
  On the Toshiba page, you can download the BIOS for Satellite A40.

  It seems you didn't check the download page detailed because on this page you will find this statement:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.

  Good bye