Update the Bios with Windows 7

Similar Questions

• E531 update the Bios with WIndows 10 installed?

  Is it possible to update the BIOS with 10 Windows installed on E531?

  I don't see W7, W8, and XP

  Yet once, have solved this problem, I thought I would share with others who may have the same or similar issues.

  I was able to update the BIOS on my Windows 10 install with upgrade download BIOS in Windows 8. Simply install as you normally would, and be patient for the machine to install. Installation BIOS itself is a little funky; I saw the screen go completely white for a while without message about progress or anything like that. But ultimately it ends and works well.

• Satellite A110 - update the BIOS for Windows 7?

  Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
  My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

  My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

  Hello

  > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
  You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
  So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

  If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

  Welcome them

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Can I update the bios with software for windows vista?

  I have a HP Pavilion a1747c desktop computer and I need to update BIOS for virtualization technology. However the update the BIOS only supports Windows Vista, and I have Windows 7. Can I still updated it somehow?

  Yes, you may be able to extract the actual BIOS file of the installation package compressed and use a flash routine appropriate for flashing BIOS under another operating system, but you do so at your own risk. Any damage to your computer by using this process is at your own risk and you take responsibility for it.

  Please send Bravo

• Can Equium P200 (PSB5E) - I update the BIOS on Windows 7?

  Hello.

  My question is: how to upgrade the BIOS under Windows 7? My Bios version is 1.70, I've seen, this version 2.50 is available for download, but only under Vista.

  Can it run Windows 7?

  Hello

  First question;
  Why do you update the BIOS?
  Is the reason for this?
  If the laptop runs successfully a BIOS update is not necessary!

  Now back to the issue of BIOS;
  Some laptops have special need BIOS for Win XP or Vista.
  So if you are using XP or Vista, then you must use the BIOS that was designed for one of these windows systems on the European driver Toshiba page you can see a column of OS that provides the info for what BIOS OS is designed.

  But in most cases, the BIOS is OS independent, which means that you can use it in any Windows operating system.

  Simply said; If the BIOS is available for Vista, then you can only use it with Vista.
  If it s independent OS, you can use it with Win 7, Vista or XP

• How can I update the BIOS without windows on V3 - 372

  I bought an ACER V3-372-57CW and refuses the computer at startup (the Green ACER splash screen at boot EFI appear same) when my Tablet WACOM Intuos 4 (if not fully functional) is inserted any USB port. Customer service Acer not recognize wanted to nor register the question so my last hope is that a BIOS update will solve the problem.

  I'm used to the manufacturers supplying utilities executable flash BACK running under FreeDOS etc but for the Acer V3 - 372, I can only find an executable for Windows 10. Of course, uninstalling the entire system just for the update of the BIOS is not a viable option.

  Is it possible to get either one executable for the update of the BIOS BACK or something that could be used from within Linux (with EFI)?

  Thank you

  Masquilier,

  At the present time, I have installed on my Windows computer.  If someone were to tell me that I needed to install another operating system to update the BIOS, I don't think it was a big deal.  I would like to...

  1. create a system with the Windows image backup

  2 clean the clean disk with 'diskpart '.

  3. install any OS they told me that I had to install.

  4. update of the BIOS

  5. after updating the BIOS, I would just wipe the drive with diskpart and restore my Windows system image.

  6. it would take me less than 45 minutes to accomplish steps 1 through 5.  Probably about 30 minutes to be honest.

  Use my logic.  Except that I'm not a Linux expert and don't know how to do what I tell you with Linux.  Just google it.  I see that some people use clonezilla, but I don't know there is a command to do the same.

  https://help.Ubuntu.com/community/DriveImaging

  http://AskUbuntu.com/questions/106943/back-up-the-whole-Ubuntu-system-or-system-image-creation

  http://AskUbuntu.com/questions/19901/how-to-make-a-disk-image-and-restore-from-it-later

  Check with the Ubuntu forum and tell them what you need to do and I'm sure it's possible.

  Important note: own Diskpart is priceless, if you n-front-rear of switching between the old modes and UEFI... or deleting partitions... or clean installation of an OS.  However, make sure that you don't accidentally wipe the bad drive (drive).  Be careful.  There is step-overs.

  Tip: you can get Vanilla iso free Windows from the links below... If you forgot to create a USB factory default your Acer Windows OEM recovery disk.

  https://www.Microsoft.com/en-us/software-download/Windows10

  https://www.heidoc.NET/Joomla/

  And create a media installation with rufus.

  https://Rufus.AKEO.IE/

  Tip2: the link below has some tips and tricks for cleaning 8.1 of Windows Installer or Windows 10.

  https://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/t...

  Tip3: always back up your personal files before you try everything before.

• x 61 was updated the BIOS with 7nuj21us.exe Failed BIOS update utility

  Only, I have restored my x 61 to the original settings due to a problem with the blue screens and decided to update the BIOS right afterwards.  I followed the directions precisely and installed all 21 of each component for this model.

  I then turn off the computer and turned it back this morning to continue to load the software.  The system started with the fan running at high speed and stopped at the ThinkPad screen.  However, nothing happened after pressing the ThinkVantage button and F1 or another touches besides.  I left for a few hours, but finally determined that I could not turn off or do anything with the machine.  He just hung there.  I did finally remove the battery and replace it and now there is not able to record when the machine is connected and it does not start.

  Is there something I can do to recover the system?  I suspect that the answer is a replacement of the Commission.  The update of the BIOS was not at the same time with something on my computer.  I have just 2 years in the warranty period at the United States, so if I need to replace the card, what are the best options?

  Thanks for your help and comments... it is a very frustrating twist, because this is my work machine.

  Dmtrich,

  Certainly, we can download and system flash here, just to be safe.

  I'm sorry that you have had this problem, I sent you a PM and email and we can follow up there to work through your specific.  Please let us know your concerns!

  Best regards

  Mark

• update the BIOS with Win 7

  Hello everyone, it has been a while. I had some problems with my SR5505F, I run Memtest + 86 on a barrette of RAM (2x2gb) both, but first wanted to check/upgrade the BIOS in case that was the problem, problem is, I upgraded the OS from Vista to Windows 7, and the BIOS for this model only offer the choice for Vista 32 and Vista 64 What should I do, my last update of the BIOS shows 2008. Thanks for any help.

  Yes, I wouldn't risk.

  You can always make a system image to install W7 using W7 backup tool, reinstall Vista, Flash the BIOS and reinstall W7 from your image backup. You will need to do a W7 boot CD or use your installation disk of W7 and instead of the installation option, select repair your computer option at the bottom left of the installation screen.  Then select restore from an image system or what is the closest that verbage thing.

  No vista installation media?

  You can do it yourself.  See below... beginning on page 289.

  http://philipyip.files.WordPress.com/2013/01/Windows-reinstallation-guide-03-03-2013.PDF

• Desktop HP HPE h9-1150 Phoenix: can you do a update the BIOS of Windows 8 while on a Windows 10 operating system?

  As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?

  I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?

  Normally the flasher will check to verify the operating system, but I can't on this one.  It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK.  I would try it first in windows.  It will tell you if there is a control in place.

• Is it possible to update the BIOS without Windows installed - Satellie L30

  I have not installed WIndows on my Toshiba Satellite PSL33E. Is it possible to create a boot CD to upgrade the BIOS on my laptop?

  This is possible only if you have a BIOS traditional Toshiba update version.
  But the fact is that page European driver of Toshiba DOESN T provide this BIOS.
  If there is only a windows base BIOS, which means that you can update from Windows operating system running.

  Sorry, don't think that you could do that. Oohhh wait maybe the ASP in your country might help. Maybe the registered maintainer can be updated using a disk.

  Welcome them

• 22-3020: updating the BIOS with the utility HP - big mistake

  I have a model all-in-one 22-3020 who Support Assistant who kept harassing me to do a BIOS update.  I followed the instructions, he made a back-up and then the utility went down.  When you are finished, I continued to use the computer without a problem.

  The next morning, I got a white screen, waved the mouse to activate the standby mode screen (I guess) and if the computer was on, I couldn't any screen.  I restarted the computer (several times) with no screen.  Then, I searched this problem on Google and found a recommendation to hit the F10 key for 8 seconds, arrow down 3 times, and then press enter two times.  It was suggested that the BIOS update has somehow got stuck in standby mode.

  I tried without success and took the computer to a local repair center who told me that they couldn't access the BIOS to go back, or set.  In short, they said that the assistant to Support HP probably brick my computer and I would probably need to replace the motherboard.  I'll pass.

  Can anyone offer any other suggestions on how to try to restart the computer?  Is it possible to connect another monitor using the USB or HDMI so I can see if the F10 key is me to get into the BIOS (although I suppose that the repair people who would have thought).

  I'm the only one who has had my computer in brick by this utility that comes on the computer?

  Any help appreciated.

  You have a 1 year warranty. Call HP support.

  If you live in the United States / CA, coordinated HP here.

• Update the BIOS and Windows Update problem

  Hello

  I have a Pavilion laptop g7-2017us running Windows 7 Enterprise. October 18,2012, HP maintenance program informed me that he had to update my BIOS. HP maintenance program had not updated of the BIOS.  See my BIOS is F.08 (dated 03/05/12).  Manually, I been looking for the latest BIOS and found that it was identical to what is installed on my computer.  It seems that software of diagnosis of HP gave me false alarms.

  Question #2: I periodically install updates to Windows.  I saw my story updates and found 2 failed: one who is 'recommended' and the other 'Important '.  I looked at the error code and they are all two "80004004. I did google search and learned this is very serious problem b/c Windows is damaged.  I tried using Microsoft 'Fix It', but it doesn't seem to help.  Anyone have any suggestions on what I should do?

  Thank you

  Jeff

  Open an elevated command prompt and type of each of these commands, press ENTER after each command, key when done try windows update in Control Panel. Don't forget to include spaces.

  net stop wuauserv

  rmdir /q /s %windir%\SoftwareDistribution

  rmdir /s /q %windir%\system32\softwaredistribution

  regsvr32 /s c:\windows\system32\wuaueng.dll

  regsvr32 /s wuaueng1.dll

  regsvr32 /s atl.dll

  regsvr32 /s c:\windows\system32\wups.dll

  regsvr32 /s wups2.dll

  regsvr32 /s wuweb.dll

  regsvr32 /s c:\windows\system32\dllcache\wucltui.dll

  net start wuauserv

• update the bios with CD

  I WANT TO UPDATE MY BIOS BUT MY LAPTOP DOESN'T HAVE A FLOPPY DRIVE.  I DOWNLOADED AND THE EXE BUT REQUIRES A DISK IT ASKS FOR A FLOPPY DRIVE, I NEED THESE FILES ON CD...

  Thank you Paul,.

  I just saw a floppy usb drive cheap on ebay; When I get it update, it has been downloaded from the hp site needs to see an A:\ USB.

  VIC

• Updating the BIOS with the anti-theft protection

  Hi all. I want 6-1113tx and I just knew that my BIOS is not updated so I tried to update, but it says it cannot be updated because your device is protected against theft or something, how do I disable it for a while to update my BIOS?

  Words exactly: '' available, unavailable ''?

  If it's the story of LoJack, I would suggest LoJack assistance. Their support numbers are available on the link from my previous post.