Update to Vista SP1 KB936330 successful but on reboot, I am asked to re - install the update for SP1
I need help to install Vista Service Pack 1 successfully.
I'm trying to upgrade my Dell Inspiron 1720 32 bit to Windows 7 since Vista. Assessment update Windows7 SW told me that I had to first upgrade to Vista SP1. I downloaded and installed the Vista SP1 and the Windows Update Troubleshooter said "Update successful" so I bought and downloaded the Windows 7 SW update. However, I checked one last time before making the update for Windows 7 and Windows Update reports the update SP1 is required. I did the above at least 4 times for consistent results as described above. I rebooted at least 3 times after the updated Vista SP1.
If the Windows Update Troubleshooter tells me that I need Vista Service Pack 1 and still Windows Update report shows clearly that I have Vista Service Pack 1 installed KB936330.
I thought that maybe try to update to the Vista SP2 but it says I can't do it until SP1 is successfully installed. I'm stuck and I need help.
Hmmm - that sounds as if there is a junction (I thought I had checked for that).
Please, check the following
SFC /scanfile=c:\windows\system32\tcpmon.ini
What result do you get?
What is the current MGADiag report?
Tags: Windows
Similar Questions
-
LaCie 5big Network 2 10 TB Network Attached Storage
I'm going to re install OS windows storage server 2008 standard but system require raid driver card,What is driver on raid card.Hello ChatJen,
Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please ask your question in the Technet Windows Server General category.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
Thank you -
KB954430 guard reinstall BUT also will not uninstall in order to allow the correction
Re vista: kb954430 guard reinstall BUT also will not uninstall in order to allow the correction. I went to the area of vista update and all other updates when you click on them have a link that seems to do the uninstall. KB954430 will not uninstall so that I can then manually reinstall it, in the hope that it will stop relocation.
There was a ranked difficulty: uninstall, then reinstall manually, but be able to uninstall the update, which for some reason I can't.
any ideas other ways to uninstall an update that does not have the ability to click on the link to uninstall?
Hello forumuser123,
Try the following Microsoft KB.
http://support.Microsoft.com/kb/971058all the best! :)
Addison -
I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?
I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
I've got max 16 GB of RAM. I have very few applications other than Office 2013.Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.
your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.
Let me give you 3 Tips:
1) never use Registry cleaners Windows 8.x and above all, they are no longer needed
(2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light
(3) If you require loading time fast on programs, think about an SSD upgrade
-
My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?
Hello
You buy Windows 10, as there is no free upgrade to Vista 10.
Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.
http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.
Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?
Best regards
-Alvin Hu
Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed). The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status. You can also check if the appliance does not work - it's probably faster and more accurate. Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?
Hello
Follow the instructions here:
-
original text: P17.sys
I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...
Hello
- What is the exact error message you get?
- Are you not sound on the computer or Rocketfish?
If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsOtherwise, I suggest you to give us more information about the issue, so that we can help you better.
It will be useful.
-
original title: admin password.
I forgot my password for my admin user account, but I have a secondary account how to get the password for the admin
Hello
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have the product key, but I have win 7 ISO to re - install the window
Original title: win 7 ISO for zero laptop refurbishment
I have the product key, but I have win 7 ISO to re - install the window. Please help?
Laptop: FUJITSU
Mode: Windows 7 home Prem OA
Consult the manual (paper or electronic version on your computer). You can have a hidden partition. You could also have a way to make a copy of new installation media. Otherwise contact Fujitsu.
https://www.Fujitsu.com/global/support/products/software/manual/
-
Name of the webcam: trust hires Live WB - 3320 X Webcam
I tried to install the drivers provided on the CD for my trust hiring Live WB-3320 X Webcam, but Remover.exe fails: http://i.imgur.com/vGIHX.png
Hello
I suggest you try the method mentioned below and check if it helps:
1 copy the files from the CD and paste it on the desktop.
2. right click on the Setup.exe and click Run as administrator.
Install the driver for the Webcam on your computer by the steps listed above and let us know.
Download drivers
http://www.trust.com/products/productdrivers.aspx?ArtNr=15354
Hope this information is useful.
-
I currently have Adobe Pro XI, but I get a new laptop, how to install the software on the new laptop computer
Hi Victor,
If you are referring to Acrobat Pro XI, you can download and install from here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X
Kind regards
Rahul
-
Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.
If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.
As a fundamental step. Leave the creative Cloud desktop application.
Delete the contents of the Temp folder:
Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.
Please press Windows + R and you will get a command window run, get hit and type %temp%.
Delete all the content inside the temp folder.
Then try again to install application InDesign CC again.Just in case, if you are still having the same issue.
Creative application cloud thus released, do not close it.
Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.
Then leave Creative Cloud application and try to install.
-
Windows Live Mail installation
I have vista service pack 2 installed and windows vista update also installed platform but windows live is to say that I need to install the platform update. How can I reinstall this update of the platform.Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15
-
I have not installed the update requested because I think the 3.6.3 version should already contain the 3.6.23 changes?
Firefox 3.6.3 is 20 versions minor behind Firefox 3.6.23.
The version numbering is - 3.6, 3.6.1 3.6.2 3.6.3... 3.6.9 and 3.6.10
Maybe you are looking for
-
Re: Tecra S1 PT831E turn on at all
Hello worldI hope I can find an answer to my problem of giant :_|.My friend sent me a laptop of America, but when I got it I couldn't activate it. I looked for several days on a solution on the net, but I couldn't find anything.The problem is simply
-
Question about "Windows 8.1 DG to Windows 7 Pro 64-bit" and Windows product key
I have acquired a recnet ThinkPad T450 fdrom a retialer online (NCIX) and I hav ea a few questions about the installed Windows operating system. Before I just go further, HRE are some information about my particular system. Lenovo ThinkPad T450 Model
-
What does .asc in script?
Hello I hjave a script in which it is said to open channel.asc and writing. What it means? where is he going to create this .asc file? What is the necessitty to do so? Here is the script below. Please one let me know why is this necessary? Void chann
-
Need drivers USB 3.0 for HP Pavilion hp pavilion g7 - 2317cl
I upgraded from windows 8.1 for windows 7, but the site only provides drivers for windows 8/8.1. I tried to look at the Device Manager, but it does not specify what type of USB 3.0 it uses.
-
can not run on my Windows 7 machine restoration
I'm just trying to restore my computer to an earlier time and it will not, any idea why? I am running windows 7.