Update Windows 10 anniversary makes unusable touchpad

Similar Questions

• Illustrator 2015.3 CC flashing continuously after updating windows 10 anniversary

  I recently updated my Windows 10 (x 64)-update of the anniversary (Build 1607). Unfortunately, Illustrator has become unstable, and I can't use, as the cursor blinks permanently. I also installed the pre-release illustrator 2015.3.1 worm, but unfortunately, it has not solved the problem.

  I also tried without success the following:

  1 default printing was put on a PDF printer as someone suggested before.

  2. use one monitor instead of two monitors

  Best,

  David

  Problem is now solved after update of Nvidia driver to ver 372.70 30/08/2016

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• Impossible to update Windows 10 anniversary

  Hello

  I'm updating the partition Boot Camp on my Mac mini end of 2014. I use the Windows Upgrade Advisor 10. Everything seems to work ok but when the update is done and I start again under Win 10 I'm back to the previous version, 10240. I suspect it has to do with the graphics driver Intel 5100 Iris. I came across this problem with a previous update and managed to get through by removing the graphics driver Iris 5100.  This does not seem to solve the problem this time.

  Anyone got any ideas?

  It's the ISO 1607 available from Microsoft? If not, can you put the name of the file you are using?

• Updated Windows 10 anniversary - camera stay connected - Powershot SX530HS

  Microsoft, in their wisdom, has broken the link with my camera and their most recent, like big update.  "It allows to work."

  When I connect my camera to my PC, the device says it's connected, and my computer starts the camera window.

  BUT by the time camera Windows finishes loading, the camera is already disconnected and closing the window of the camera because the camera is disconnected.  The camera turns on, it just disconnects.

  I can't remove my PC camera device because it does not appear until it is connected.  And even then, it disconnects after about 30 seconds.

  Any ideas?

  Thank you...

  If anyone has this problem - mine, just start the configuration of Wi - Fi in the Canon Utilities.

  In doing so, turned on my camera to connect to my PC and I managed to upload photos once again without any problems.

• HP 15-af131dx: should I update windows 10 birthday?

  Should I update to windows 10 birthday? Someone had problems with the update?

  To install the updated Windows 10 anniversary choice you completely. Yes, people have had problems with the update. If you need the use of the computer and can not afford to face questions, you can wait on the installation of the update. If problems occur during or after installation, and you can manage it, you can install the update. I suggest creating a Windows repair disc and do a Windows system image backup before installing the update.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• updates Windows 10 Windows 7

  formatted hard dive re - install installed windows 7 recovery disk, problems with installing windows 10, then ms does not update updates windows 7 and 10 in windows 7.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  If you are prompted to enter a product key, click on "I don't have a key" and "do it later".

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 anniversary

  Select the option to upgrade this PC now if you want to upgrade immediately, if you want to download an ISO image or create a copy on a USB bootable, select create to another PC installation media , and then click Next

  

  A new option has been added to the configuration for the users screen, reinstall Windows 10 on a system already installed and activated. If your system has a digital license attached to it, 10 Windows will be automatically updated:

  

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• Cannot install of Windows 10 anniversary update on MacBook Air

  Hi all

  When I run the Upgrade Wizard of Windows 10, he told me that I am currently running version 10586 and the latest version is 14393. (from August 03-2016). After I click 'Update Now' to start, I get the following message:

  10 of Windows does not run on this PC

  This is why 10 Windows cannot be installed:

  CPU: OK

  Memory: OK

  Disk space: OK

  ! Display: The display is not compatible with Windows 10. Check with the manufacturer for support.

  End of 2015 MacBook Air running Windows 10, no problem, the display runs the Intel® HD Graphics 600 driver and Control Panel, everything is OK.

  No clue as to what might happen?

  Thank you

  Pedro

  Updated the Intel driver from the Intel site and still the same, cannot continue the update of the anniversary. Hope that someone has any ideas on how to solve this problem. Thank you very much in advance.

• CVI executable causes an on update of Windows 10 anniversary 0xC0000005 Access Violation.

  Created executables always causes an Access Violation (0xc0000005 exception) to the closing period on Windows 10 RS1 (update of the anniversary).

  This problem occurs in LabWindows CVI 2015 and 2015 SP1.

  How to reproduce: simple program to create and compile with the (x 86) release profile by default.

  for example:

  #include "test.h".
  
  
  
  
  int ph;
  int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
  
  					   LPSTR lpszCmdLine, int nCmdShow)
  
  {
  
  	If (InitCVIRTE (hInstance, 0, 0) == 0)
  
  		Returns - 1;    / * memory * /.
  pH = LoadPanel (0, "test.uir", group of EXPERTS);
  
  	DisplayPanel (ph);
  
  	RunUserInterface();
  return 0;
  
  }
  int CVICALLBACK CallExit (int, int int event, control panel,
  
  						  void * callbackData, int eventData1, int eventData2)
  
  {
  
  	switch (event)
  
  	{
  
  		case EVENT_COMMIT:
  
  			QuitUserInterface (0);
  
  		break;
  
  	}
  
  	return 0;
  
  }

  The problem is visible on the control panel > reliability history > Error Reporting:

  

  Also the code of the executable file (exit code) is always 0xc0000005 instead of zero.

  To check out more easily code can be called the executable through file .bat:

  off @echo
  
  Test.exe
  
  echo ExitCode = %ERRORLEVEL%
  
  pause

  I have observed that if multiple instances of the same program are running, only block when the last instance is closed. It seems that the problem occurs at the time that the CVI runtime is released from the ram. (The latter is only a guess)

  Hello

  We did some research and saw that the failure is related to some police files in

  c:\Windows\SysWOW64\cvirte\fonts

  c:\Windows\System32\cvirte\fonts

  Could you try deleting these files and see if the heater is always performed. If this isn't the case, it would be a work around if you do not use these fonts.

  We continue the investigation to see the exact cause

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• What makes the update Windows 8.1 so critical?

  What makes updating Windows 8.1 for windows 8.0 so critical!

  (Either a microsoft MVP to be approved as response staff)

  (Not to be confused with Windows Update 8.1)

  Hello

  Here is the reason:

  http://Support2.Microsoft.com/GP/lifewinfaq?WA=wsignin1.0

  7. What is the policy of the policy of Support for Windows 8.1?

  Windows 8.1 is part of the same strategy of life cycle of Windows 8 and reaches the end of the main Support on 9 January 2018 and phase end of Support extended on 10 January 2023. With the general availability of Windows 8.1, clients on Windows 8 have 2 years, until January 12, 2016, to move to Windows 8.1 in order to remain supported.

  See you soon.

• Photoshop and Illustrator is not opening after the update of Windows 10 anniversary

  Hello!

  After the update of Windows 10 anniversary, Photoshop and Illustrator can't open. What should I do?

  Thank you!

  not serious.

  You get an error message or Apps do not respond when you try to open.

  You can run the System File Checker to see if there are any problems with Windows OS after upgrade files,

  https://support.Microsoft.com/en-in/KB/929833

  As for the latest CC applications you need to install the latest package updates Visual C++ Re-distributable.

  See the link below:

  Updated Visual C++ Runtime 2015

• VN7 - 592G blue screen after installed Windows 10 anniversary update

  Hello

  This week I installed the last 10 updated Windows on my laptop VN7 - 592G (tried build 1511 upgrade and clean installation, too), however, I still have the Blue error screen. I can't use my laptop, or to do anything because of the Acer is not kept up-to-date of pilots.

  Of course, I installed the drivers of the last Acer of acer.com but Realtek Audio does not work so my computres crashes at startup.

  ==================================================

  Dump file: 080316-7609 - 01.dmp

  Crash time: 2016. 08 03. 0:18:11

  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  Bug check code: 0x1000007e

  Parameter 1: ffffffff "c0000005

  Parameter 2: fffff80e'adc68a41

  Parameter 3: ffffb281'd19376a8

  Parameter 4: ffffb281'd1936ed0

  Caused by the driver: RTKVHD64.sys

  Caused by the address: RTKVHD64.sys + 48 has 41

  Description of the file: Realtek (r) High Definition Audio function driver

  Product name: Realtek (r) High Definition Audio function driver

  Company: Realtek Semiconductor Corp.

  File version: 6.0.1.7687 built by: WinDDK

  CPU: x 64

  Plant address: RTKVHD64.sys + 48 has 41

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\080316-7609-01.dmp

  Number of processors: 8

  Main version: 15

  Minor Version: 14393

  Size of the dump file: 411 988

  File dump: 2016. 08 03. 06:40:05

  ==================================================

  Hi all

  I'm sorry for the delay; first of all, I want to thank you all for your patience as we worked to solve this problem. Second, I have been informed that we had a new audio driver released for the VN7 - 592G, version 6.0.1.7910, and it is now available in the website of drivers and manuals.