Update Windows SP3 and DVD will not work.

I show a history of update of. NETFramwork 3.5 and Service packs 3 dating back to May 2010.  At the same time, I lost the use of the DVD +-RW.  While I got the update automatic running, even when I try a download of express update, the system always says that I need. NETFramwork 3.5 SP 1, error code 0 x 643.  I tried all the ways suggested to get the update, but it fails every time.  The "Add/Remove" says they are listed, but why can't pass the download system say I need the. NETFramework 3.5.  I had been doing my backup on the DVD but were not that the device appears even now on the screen.  I don't know what else to do.

[I needed a security related update to qualify you for a free Microsoft support.]

See the section "How to get help", for example, http://support.microsoft.com/kb/979909

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

Or you can...

Start a Windows Update support incident email request for free
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

Good luck!

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • Upgrade Windows 7 to Windows 10 and Thunderbird will not work. SOLVED was not logged as an administrator

    On my laptop, conversion of Windows 8 to 10 was fine and Thunderbird has worked without any problems. On the computer of my wife who was on Windows 7, Thunderbird does not work. Thanks to this forum I could check that all emails and addresses etc. have been copied across, but Thunderbird asks me to put in place the new account because it does not acknowledge my previous POP and other parameters. Bloody Microsoft. Can anyone help?

    I have found the answer - default (why?) I was connected as administrator and therefore was not seeking the e-mail account of my wife in the same way as it would. The search in all the files and directories of profile TB, I found a test directory, where TB was given to me. Do not know what other tricks that I solved the problem, but it is all working now. And people spend their entire lives on such things?

  • I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please

    I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please

    There seems to be a problem, especially with older devices. And I guess that's the end of Apple since it affects both.

    You can try to use iTunes to restore your device from a backup

    http://support.Apple.com/kb/HT1414

    Or you could wait it out and see if Apple fixes things.

  • Vista Home Prem64 runs just older games (compatible XP) fine and suddenly will not work the games and id is 'a problem' without code or soln.

    I have a newish Vista Home Premium 64 NB and HAD no problem playing games, I played on my DT Pro XP until a few weeks ago. Now, when I go to open games, windows tells me that "there is a problem and needs to close the game" and "If a solution can be" it will inform me! Using compatibility, updated drivers, uninstalling and reinstalling have not worked. I do not understand why they worked very well and now they do not? Anyone have any ideas? It looks like my Direct X? changed to 32 bits, for some reason any-is it a problem? The Direct X is 64-bit? I also notice that it is very skittish about some other applications that I try to DL as well now - IE Puran Defrag. Thank you

    Hello
     
    Welcome to the Microsoft Windows Vista newsgroups!

    Try the following steps:
     
    Step 1:
     
    Select the game in the State of clean boot and check.

    Try to perform a clean boot. Follow the steps below:
    1. sign the computer by using an account with administrator rights.
    2. click on start, type msconfig.exe in the box start search and then press ENTER to start the System Configuration Utility.If you are prompted for an administrator password or for confirmation, type your password or click on continue.
    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
    5. click OK and then click on restart.
    6. try to play games and check.

    See the link below for more details:
     
    http://support.Microsoft.com/kb/929135

    Step 2:
     
    Try to restore your computer to a time where it was working fine.

    It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points.
     
    For more information such as how to perform a system restore, you can follow the link below:

    http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx#EI

    Step 3:

    Try to reduce the hardware acceleration on your computer and check.

    To reduce the hardware acceleration on your computer, perform the following steps:

    Click Start in the lower left corner of Windows Vista.

    Click Control Panel, click appearance and personalization, click personalization, click display settings and then click Advanced settings.

    Click the Troubleshooting tab, and then click on change settings.

    Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

    Move the hardware acceleration slider to reduce it. It is the basis of acceleration.

    Kind regards

    Savan - Microsoft technical support.

  • Windows Media Center visualizations will not work

    My Windows Media Center visualizations will not work for some reason any. its been like that for a while.
    When I listen to music and want to see my office shows that the program is still underway
    I thought it has something to do with the visualizations I instaled on Windows Media player
    (like ribbons and Upcube)
    I tried to remove them, they either come back or he will constantly ask me to go to it

    my system is portable

    • Windows Vista Edition home premium

      • Intel core 2 DUO

      32-bit operating system
      2.00 GB

    I missed a CD command before the directory (since corrected) so orders would be as follows:

    CD C:\program files\windows media player\visualizations\

    DIR

    You'll see the DLLs listed here, they are visualizations that have been installed (if the author decided to use directory default visualizations) NOTE: there may also be cases where the author badly spelled directory visualizations and used something like "visualizations".

    regsvr32.exe - u nom_fichier.dll  (use only the indicated file name that you want to remove)

    repeat if necessary.

  • Windows Fax and Scan will not add an account to my internal Fax Modem

    I tried all the work around listed Forums and Windows Fax and Scan will not add an account to my internal fax modem. The Modem is recognized by Windows 7 and test very well. I am running Windows 7 Professional 64 bit.

    Hello michgaud,

    To set up a fax server

    1. Before you begin, make sure that your computer is connected to the network and you know the network address of the fax server (for example, \\mycompanyfaxserver).

    2. Click the button start , click programs, and then click Windows Fax and Scan.

    3. To use the fax mode, click fax at the bottom of the left pane.

    4. Click the Tools menu and then click Fax accounts.

    5. Click Add, and then, in the Fax Configuration Wizard, click on connect to a fax on my network server and follow the instructions.

    Check the following settings:
    In Windows Fax & scan settings, open tools/Fax and under the general tab.
    Look at the 'Fax select device".
    Your modem is listed here?
    You have the, "allowed to send and/or receive" selected?

    This setting should be checked and selected until all accounts are created.

    You can watch the post following TechNet with a suggestion that might help with your problem.
    http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/18a5dba1-1bc5-49EB-923A-b81958e80727

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

    Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

    The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

  • Satellite L670 - CDs and DVDs do not work smoothly

    Hello!

    I recently bought a Satellite L670 and there is a problem with the DVD player: CDs and DVDs do not work smoothly, there is a lot of audio and video clippings.
    I uninstalled the driver for DVD drive and reboot the laptop, but it has not solved the problem.

    Could someone help me with this?

    Greetings from France!

    With cups, you mean peak and its gel for a second, right?

  • OfficeJet L7680 repeat me it is out of paper and now will not work.

    OfficeJet L7680 repeat me it is out of paper and now will not work.

    Is the message of the printer or on the computer. If on the computer you have communication problem check the connection between the computer and the printer.

  • Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Original title: fax and scanning

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Uncheck the fax and scan Windows

    Click OK

    Reboot if prompted

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Check fax and scan Windows

    Click OK

    Reboot if prompted

  • I bought my Gateway laptop that incorporates a webcam, and it will not work, did not work as I had. How can I solve this problem?

    I bought my Gateway laptop that incorporates a webcam, and it will not work, did not work as I had. How can I solve this problem?

    Have you contacted technical support Gateway?  http://support.gateway.com/us/en/support/default.aspx

    If for some reason you can't do that, more information about what you mean by "will not work" would be useful - how you try to use it (in an application provided by gateway, Skype, etc.) and what (error?) when you try?

  • I bought 2 Adera for Windows 8, and it will not download. Whenever I click on the download icon, nothing happens.

    I bought 2 Adera for Windows 8, and it will not download. Whenever I click on the download icon, nothing happens. It becomes extremely frustrating that the account has been debited from my bank immediately... Still no game! Any suggestions please. Thank you

    Hello

    You must get in touch with the sales of Microsoft and Windows Store Support for help on this issue.

    To avoid such problems in the future, you can try to reset the Windows Store cache, and then try to buy apps.

    Reset the Windows Store Cache steps.

    a. press Windows + R on your keyboard to open the Run dialog box.

    b. type WSReset.exe, and then click/click on OK.

    c. the information store now open and indicate the following: for the store cache has been cleared.

    Please let us know in case you need assistance on issues related to Windows.

  • CD\DVD will not work. Vista Home premium, 64-bit. Message says: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    I downloaded the drivers needed from the Dell site and the burner will not work. The computer was again in March 2009. Not sure where the drivers should be located. I downloaded on: win\syswow64\drivers\afc.sys. I've looked everywhere and tried to find a dialog box offering the option "update drivers" for this device. Could not find a way to do except Dell and that doesn't seem to work. The 64-bit system has no 'Device Manager' that I can find. When I look at the properties of the burner, the link to "find a solution" is not highlighted.

    Hello DanHenry,

    Try the miracle solution at this link: http://support.microsoft.com/kb/314060 but before you uninstall all third-party software (example: Nero, Roxio, iTunes). You can reinstall your software after you reboot your system. Please let us know if this helped you. Make it a great day!

    "In the end, the love you take, is equal to the Love You Make"

  • Envy23: CD and DVD will not play

    My CD/DVD will not play.

    CyberLink recognizes the drive, but displays the error message "No disk in drive" when inserted an ois.

    similar to windows media player. Have updated the BIOS but no luck have updated from Cyberlink. Can you please help. Very annoying.

    Hello @Brutus2 and @2edo,.

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your posts about how you're not able to get your computers to play the CD or the DVD into the optical drive, and I'd be happy to help you in this case!

    To fix this, I advise you to follow the steps described in this document on disk impossible reading disks (Windows 8). This will help you enable your computer to read and play CD and DVD media on the optical drive.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • I use Mac OS 10.4.11 and after downloading firefox 4.0, I get a circle + bar symbol oblique covering the logo of firefox - and it will not work after copy in my applications folder. What is the problem? Had to reinstall 3.6

    I followed the instructions on the screen to download firefox 4.0. After the launch of the dmg image in the window of firefox dmg is the symbol of firefox with a "do not go" symbol on it (for example as a sign of the universal movement for "don't go this way" - red red circle with a diagonal line). "

    Copied on ANYWAY - which was stupid - and he says: "Cannot open the application"Firefox"because it is not supported on this system."

    I couldn't find documentation saying my OS has not been supported by firefox 4.0.

    Is there away around this problem?

    Firefox 4 will not work on OS X 10.4, it requires at least OS X 10.5 and an Intel Mac.

    There is an accumulation of third party that runs under OS X 10.4 and Mac PPC, for more details, see http://www.floodgap.com/software/tenfourfox

Maybe you are looking for

  • If I open a web page or recharged its display HTTP ERROR 403

    Posted by David

  • Cycle mode has stopped working...

    Hello After the last update does not jump the playhead to the cycle mode when you use the space bar... Anyone know the fix? Thank you.

  • iMac is asleep or not?

    My iMac is in "sleep". I used it for 5.1.2015 (all 6.1.2015) It seems to me - according to the Console Out daily report, that my iMac wakes up twice without me autour... How could it be? I enclose the print screens... Thank you

  • Failed to install Vista SP2 on T61

    I tried to install the Vista SP2 on a T61 running Vista business with SP1 installed. Windows Update says it installed OK, but when machine restarts to configure update fails to say that "some changes is not passed, returning from the changes. Can som

  • Windows 7 does not remember a password on the LAN

    At home, we have two laptops running (1) Windows 7 Home Premium, and Windows 7 Professional (2). There is also a desktop PC running Windows XP Professional, and Windows 7. Are all the facilities of Windows 7 SP1 and XP SP3 installation. Three of the