Update Windows (vista OS) never finished the update and keeps looping back to step 3.
Windows Update was updated and the system was arrested by mistake. When the system is turned back on, the update process began in stage 3, goes to 50% then completed, he stops, stops, restarts and returns to step 3, States repeats the process over and over again in a loop.
What are my options?
Hello
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358
Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.html
You can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.
This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
Try recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html
Method 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
You can also do a restore of the system of starting with a Vista disk.
Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
x 64 64-bit.
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358
------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Update for Windows Vista can not stuck at 0% and keeps restarting
I have a Dell laptop running Windows Vista. It keeps up-to-date and then restart. The screen is stuck at 1 of 1 update but says 0% completed. It restarts often but once it restarts, it goes back to the screen saying 1 1 0% complete. I was able retrieve the log in once and get my screen with my icons, but then it restarts again. Help, please! Don't know what to try!
Hello
Apologize for the delay in response. To resolve this problem, see the following article:
http://support.Microsoft.com/kb/2700567
Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.
I hope this helps. Back to us for assistance.
-
I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.
Does anyone have any suggestions as to why the game does not work for me and how can I make it work?
Let me know, thanks. :)
Hello whyohwhy42,
I suggest that you follow the section below. This includes various possible steps to solve this problem:
http://support.Microsoft.com/kb/812759
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: Update Configuration
Whenever I boot, I get the following: all the configuring updates step 3 of 3 15%; do not turn off your computer. He never finished the updates. I can get by launching start-up repail and restoration, but I have to do this everytime I turn on the computer.
Adding to the suggestion of Azeez, you too, try the following.
Give this one a whirl:
- http://support.microsoft.com/kb/949358> -
Cannot update Windows Vista kb971468 due to the error message 800B0100__
Cannot update Windows Vista kb971468 due to the error 800b0100 of message
Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
http://support.Microsoft.com/kb/958045Vista SP1 or SP2 installed?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
-
Windows Vista is stuck on the 3rd step of the step 3 update
Original title: UPDATE STUCK IN LOOP CANT LAPTOP USE. HELP PLEASE.
Windows vista is stuck on the 3rd stage of the update from step 3 and continuously restarts my laptop acer of nephews, we cannot not beyond this point to use the laptop. Any suggestions?
Hi Jol1,
You can try the troubleshooting provided in the link below steps to fix the problem.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
Let us know if that helps.
-
After an update of Window Vista Business, I lost the option of hibernation
After an update of Window Vista Business, I lost the option of hibernation
How can I solve this problem?Thank youHey Joe,
What is the number of the Windows Update installed recently?
I suggest you to follow the steps from the link and check if it helps.
How can I enable hibernation on my Windows Vista computer?
I hope this helps.
-
A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371) I can't find answers and I'm not tech saavy. Every day for a month updates failed to install
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Method 2:
Put the computer in a clean boot state, and then try to install the updates and check if it works.
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.
Method 3:
Try to download updates from the Microsoft Downloads Web site and check.
http://www.Microsoft.com/download/en/default.aspx
Hope the information is useful.
-
just always fails and keeps coming back as an essential update, how to exit the loop
Hi Flybywire,
· You receive an error message?
· How you try to install the update for Windows Vista (KB975560) security?
Do the following to display the Windows updates history for the error code.
a. click Start, type Update in the Start search box.
b. in the list of results, click Windows Update.
(c) in the left pane, click view update history.
Follow the steps below to solve the problem:
Method 1: Download the update manually from the Download Center and check if you are able to install it.
Update security for Windows Vista (KB975560)
Method 2: I you suggest to perform the clean boot and then try to install it.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Hope this information helps.
-
Original title: 15 December 2011 update of Windows Vista
After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!
Hello
I suggest you to see these steps:
Step 1:
I suggest to reset Windows Update components and follow step 2.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Step 2:
After reset, you will find that Windows 8 or 9 update that must be installed.
Try to update one by one and check.
-
I cannot use windows update. The 80070490 error keeps coming back.
I cannot use windows update. The 80070490 error keeps coming back.
I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows. What can I do?
Any help would be much appreciated
I cannot use windows update. The 80070490 error keeps coming back.
I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows. What can I do?
Any help would be much appreciated
Reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Try to update.
If it still does not work, try this...
- Start an elevated command prompt.
- Run the following commands pressing on enter after each line:
net stop wuauserv
CD %SystemRoot%\System32
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
net start wuauserv - Reset
- Try to update.
* Important * When you do this, the following problems occur:
- Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
- When you remove the Software Distribution folder, your download history is deleted.
- If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.
* Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.
STILL no? We have something to try...Use this FixIt:
How to get the latest version of the Windows Update AgentReset.
Save components WU:
- Start an elevated command prompt.
- Run the following commands pressing on enter after each line:
regsvr32 Jscript.dll
regsvr32 c:\windows\system32\wuapi.dll
regsvr32 c:\windows\system32\wuaueng.dll
Reset.
Try to update.
If it still does not work after that - repeat ONCE more that part...
Reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Try to update.
Come back and let everyone know how you faired.
-
How can I stop auto-updates and keep UserAccounts asking if I was the same update
User accounts in W7 has no option to not be reminded about the same updates again [I won't need not and cannot use] every thirty minutes or more for a few days. If I click on Yes, I get a message saying that I don't need but 30 minutes later AU wonder again. I am a research student and I can't have important experiences, interrupted by updates in XP, I turned off and then automatic update make the updates when it is safe for me to do, but I can't find a way to do this in W7. I unchecked automatically updated in Java, Windows, Office and these programs I could access, but I still get notified.
Hello
Welcome to the Microsoft answers site.
You can try to disable automatic updates, the folloe as follows:
1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
2. in the left pane, click on change settings.
3. Select the desired option.
Under recommended updates, select the include updates in downloading, installing or informs me of the box updated recommended, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Please see the link below:Activate the update or disable automatic
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off
About user accounts, please visit this link:
http://social.Microsoft.com/forums/en-us/whssoftware/thread/bedd7d54-c17a-49B2-B738-65b9b1c3b6db/You can also disable the notification from the center of the action, follow these steps:
1. click on the Start button to display the Start Menu. Then select Control Panel.
2. the Control Panel window opens now.Click on system and security of the Control Panel window.
3. the system and security of control panel section opens. Here you can see the center of the Action link.
4. click on the link the Action Center to open the Action Center window.
You can finish the first malware scan of this screen.5. click on the button scan now to open the window of Windows Defender scan
Enable / disable NotificationsNow to change the behavior of notification and enable or disable messages, the Action Center settings edit link can be used from the left pane of the window for Action Center.
From this window, change the checkboxes for messages from Action Center notification like Windows Update, Windows Firewall, Virus Protection etc. Click OK to save the settings.
Thank you and best regards,
Azam - Microsoft technical support. -
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.
Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.
Hello
The CD/DVD drive needs no special drivers!
Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)Simply said, the Vista should recognize the drive without any problems.
A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?
There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
It of necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}1. click on the start menu.
2. If it is a Vista machine in the search box type regedit without quotes.
3. look for the registry key mentioned above.
4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
5. restart Windows.
6 let me know if it works. -
Hello
In Windows XP (prior to Windows Vista), a Service could be interactive and display a window/dialog on the login screen.
Of course services are no longer allowed to be interactive, and certainly, I agree that it is an improvement in security.
However, say if I wanted to do one of the following values, which is possible (and how to implement). I don't mind what language I have to set in.
(1) add a button in the login screen that says "Reset Password" which will then invite a form with questions of security.
(2) run an application within the login window
Really appreciate any help on this matter,
Mark
Hi Mark,
The question you posted would be better suited in the MSDN Forums; We recommend that you post your question in the MSDN Forums to get help:
http://social.msdn.Microsoft.com/forums/en-us/categories
See the following for more information Microsoft article.
http://blogs.technet.com/b/Aho/archive/2009/11/15/custom-credential-provider-for-password-reset.aspx
Keep us updated on the status of the issue.
Maybe you are looking for
-
My Nano 4th gen battery is dead, is this the end?
My battery Nano 4th Gen does not load, is this the end?
-
Some body changed my Apple, I would do so my iPhone 4S can not disconnect from iCloud. How to close the session.
-
Satellite A100-926 Vista driver
I have a lot of problem with BT and Irda driver, because I can't find the driver for Windows Vista. What kind of driver, can I use? I can't believe that toshiba do not release the driver for Windows Vista! Thank youdirect them
-
I would get a warning of some kind, when I receive an email. How can I do this?
I think I can get an alert of a certain type when an email meets. For example, I can be on the internet and maybe a message box is displayed indicating that I have an email. Is this something that is available with windows 7? If so, how can I confi
-
Dear all,After the application of EJUW and ZLNA stains on my WebLogic 10.3.6.0 - Windows Server 2008Now I am unable to run discoverer (11.1.1.2.0).WLS_DISCO server to work properly in the WebLogic Server Console, Pls check the attached file: WLS_DISC