Update Windows XP after the system recovery

Similar Questions

• Problems with the updates after the system recovery

  Hello.

  After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

  If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

  Someone knows what's the problem?

  Regards Terry

  Hello Terry,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on research.

  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'Windows Update'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, please reset the Windows update components and check.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

  After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Windows calendar after the system restore notes no longer exist.

  The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

  Hello
  
  First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
  Windows Vista has an option to cancel the system restore. To do this, follow these steps.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on undo system restore and then click Next.
  3. proceed to review your choices and then click Finish.
   
  Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
  
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• Windows does not start after the system recovery

  I have a Pavilion dv9700 w/Windows Vista 32 bit Home Premium.

  After running the system since the disk partition recovery hard (supposed to be successfully), it restarts to:

  "Unable to start windows.  Recent change hardware or software may be the cause.

  "Insert the windows disc" - the computer did not come with one.

  «Computer or system manufacturer contact administrator»  -HP now wants to charge me for the real-time chat agree that came with my system was "free of charge as long as you own the PC."

  "File windows\system32\winload.exe".

  'status 0xc000000f '.

  'could not be loaded.  The file may be missing or damaged. »

  Help, please!

  Finally found someone who had a Vista disk, so I did a clean install, which fixed the problem.  Then, I downloaded and installed all the HP drivers/software.  It's a shame that computer manufacturers do not issue a disk with the operating system when they sell computers more.  If they gave me one, I could have it fixed in one day.

• Windows Update running long after the system restore Image

  This is my 2nd try at why put Windows runs so long.

  I did everything that was asked of me in my 1st post.

  My last answer a question for me was on 19 September 2016.

  Which was a Monday.
  Then silence. I don't know if anyone can help with this problem.

  It is still ongoing.

  But at least informed me that it is not something that can be done.

  Instead of silence.
  The links below are to my OneDrive. Please let me know if there is more information.

  Operating systems: Windows 7 Ultimate sp1 64-bit

  Recently I reinstalled Windows 7 with a system image backup.

  He took my computer the initial installation of Windows 7.

  When I checked for updates that need to be installed in the Windows Update control panel there are not.
  So I clicked Check For Updates.

  Rental search automatically updates, run first for 3 hours. Once again for 8 hours. Then once more for 20 hours.
  Each control time for updates still worked and no updates have been downloaded for installation.

  How can I get updates for my computer, if check for updates is not download any?

  Sheilah

  systemlog

  SystemInfo

  Try the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• TouchSmart 610 1150y: No Audio output device is installed after the system recovery

  I recently experienced an issue that forced me to do a system recovery. I upgraded Windows 10 months passed without problem from 7. After saving, I did the recovery. The Beats Audio System will not work now and the system indicates device output Installed in no..

  I tried to download drivers without impact. I also uninstalled the audio controller (IDT High Definition Audio CODEC) via Device Manager and rebooted him the system. Doing so resulted in a warning on the unit triangle. When I try to download software updates for it, it starts to download the driver, and then sends an idicating error message that a driver has been found but the device does not work. The audio worked perfectly until I ran the recovery, so it seems not to be a hardware failure.

  

  Can you suggest a way to solve this problem or to diagnose the problem?  Thanks for any help you can provide!

  Mark

  Finally! I found a solution! A Google search for a Codec IDT pilot lost in Windows 10 randomly suggested another thread here on the HP Forum. After several suggestions, is affected:

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me collect a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Displays warning message, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.

  Perfect! Worked like a champ!  Problem solved... just took me two weeks to find.

• Update Windows 10 and HP System Recovery

  Hey,.

  I plan on moving from Win 7 to 10 to win, but the only thing stopping me is, what happens if I use the HP System Recovery after doing? Considering that it is pre-installed for Win 7 on my system, it will return it Win 7 or what?

  Thank you!

  Hello

  Yes, if you are using HP System Recovery, it would reinstall Windows 7, but it is important to note that the ability to do it from the hard disk recovery Partition does not work after upgrade to Windows 10.  You must use your recovery media - if you have not created this, a guide can be found here.

  Another option that you might consider, if you must reinstall Windows 10 once you have upgraded is the following.

  Also long Windows 10A active Ok after upgrading to 7, in the future, you can just perform a new installation of 10 as stated in the guide on the following link.  Note: On the activation screen, select 'I don't have a product key' - 10 Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Qosmio G30 - problem after the system recovery procedure

  I Qosmio G30 - 148 who have Windows XP MCE, trying to download some system programs crashed and make automatic restart.

  I then used a RECOVERY CD to recover my system all and followed the instructions on the CD but when finished and restart the system, a famous blue screen telling me there is a problem in my system and windows must be restarted.

  When restarting in safe mode, it is a message telling me that the system is not fully installed. Please, rerun the Setup program.

  You could any body help me in this problem because it's a strange problem?

  Note: I tried to install Windows XP from external CD but the system did not have the hard drive.

  You are right. It's a really strange problem. I don't know if you use some external devices but before you start recovery procedure please remove all connected devices.
  The fact is that this recovery image is designed for this model of laptop and the specific hardware configuration. If the BSOD occurs after the installation of the image it takes little hardware related issue.

  I don't really have any other explanation. Problem is that no one here will be able to offer an accurate diagnosis, and we can only speculate what may be the problem.

  Try to do it again to the recovery facility, but if the problem persists I fear that you need professional help.

• VERY URGENT. Data in accessible after the system recovery which says - data will not be deleted.

  I did a system restore by pressing F11 on my laptop HP XP Home pre-loaded. The step has asked told me that by doing a restore via this procedure, my data will not be changed or lost. I did not a destructive restore.

  Now after recovering my laptop works very well, however I got two sets of data - much of the imp in My Documents data and personal data to another folder. When I went back to work on the laptop, I was able to access the data that I had the pvt. folder, however, any data that is very Important to me and who was there in My Documents has been moved to a new folder named HP and I can't access it. The capacity of the disk hard has not changed, which means that the amount of hard disk space that has been used before is the same, so it means, no data has been removed. I analyzed the defragmenting drive C drive and can see the report, which said, all data is located in the HP folder, but when I try to enter the folder, it says access is denied.

  During recovery, I haven't used any password, which could help to access this folder, I am still unable to view this file, I tried to use an administrator in safe mode too, still the same message.

  I called HP customer, but after talking with them for an hour, I couldn't find a solution. I called microsoft and they say that they support no more than XP? PLEASE HELP ME. I do not understand when I follow on screen instructions from microsoft themselves, why am I facing this problem? Is it a fault of customers to purchase an original product from microsoft, and then when he has a problem microsoft responds that they cannot help them?

  Since I followed all the instructions from microsoft, I'm in trouble, if at any time it would give me a warning that your data won't be accessible or will change, I would have not been made.

  PLEASE HELP ME, I NEED AN URGENT DATA. I HAVE A FEW PRESENTATIONS MAJOR IN THE COMING WEEK, AND I DON'T GET.

  Most probably, you have just to take ownership of these files.  The recovery process has probably created a new user, who does not recognize the system as having access to this folder.  To do this follow these steps:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• After the system recovery

  First: 1 - my computer (computer laptop Fujitsu Semens_Windows Vista Home Premium__Pack 2) had a restart on his

  2. I connect, but after 3-6 min me has said that Log In failure
              
  3 - I reboot again and Ive done a Start Up repair
  4 - 2 terms of Start up - the Normal Mode or Safe mode
              
  5. with normal mode, the computer was unnable upward departure
              
  6. I choose Safe (System Recovery) data ___All Mode personal will be lost...
               
  7. after recovery of the system my Local disk (D) the smallest in memory before the memory recovery was 94 and now 75 GB, anyone know why? Please help me!

  Hello

  Recovery mode and security system are two different things and in safe mode lets you access Windows Diagnostics mode and that you will lose all the data in this mode. System and Windows.old files have not been deleted during recovery of the system was carried out. Try to throw the disc to clean the disk and see if you can find and remove unwanted files that could be to fill out the hard disk.

  1. open Disk Cleanup by clicking the Start button picture of the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.

  2. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

  4. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files you want to delete, click OK, and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Also check hard disk in disk management and see if you can see any differenc in the capacity of the hard drive partition which is in question right now.

  1. click on start.

  2 type diskmgmt.msc in the instant search box.

  Concerning
  Anthony.

• After the system recovery, installation of MS Office 2003 says incorrect product key!

  I ran System Recovery on my HP Pavilion a465c (prod # 160A DT) with the home edition of XP preinstalled.

  After trying to start any MS Office 2003 product (which was also preinstalled), I wonder to enter a product key.

  Carefully, I entered the correct product key for the Windows XP Home edition on the computer sticker and the messge comes back as 'incorrect product key.

  I tried also to carefully enter the correct product key on my registry (which is different from the sticker product key) and it is also as "incorrect."

  Someone at - it suggestions on why the product key on the label and on my registry both come back as incorrect?

  Thank you!

  Tremfly

  HP Pavilion a465c
  Model # A465c
  Product # DT 160A - ABA
  OS - XP Home Edition

  The bottom of the laptop product key is the product key of Windows XP.  You need the product key Office 2003 from the Office 2003 package.  If you haven't, I recommend the purchase Office 2007 Home and Student Edition.

• Portable operation extremely slow even after the system recovery

  I have a series of g laptop and on last week, it started running VERY slowly after the start. It came from nowhere, because it allows to work just fine the day before. So yesterday, I restored the factory setting and saved without previous files or documents. He worked as new for a few hours and then it suddenly becomes very slow. It's so slow that it freezes or it loads forever when I just click or click on the Start button. Pretty much everything I had there, it was iTunes malawarebytes, utorrent, steam and some other stuff that is were all on my computer before the problems began. Help will be greatly appreciated!
  
  Best regards, Nicolas

  Hi Nicolas,.

  Regarding the size of the hard drive, there may be problems with the recovery process if you are installing a drive of smaller capacity than one that was originally supplied with your laptop - the same size or slightly more is Ok.

  Unfortunately, I do not see the image of your link, but I think I know what you are referring.

  I guess than the previous you reinstalled the operating system is using the D Partition of hard disk recovery.  However, with a new disc, it will not be possible that the disc is not completely empty.  You will need to use a set of recovery DVDs to reinstall the operating system on the new drive - however, this procedure going to re-create the recovery on the new drive Partition automatically.

  All you have to do, once the new drive has been installed is to operate on the esc key when you launch Notepad to open the Start Menu.  Insert the recovery DVD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.  This will start the Recovery Manager and the whole procedure will be very similar to the previous method, you used - you will be prompted by the software when you need to change DVD to continue the process.

  Kind regards

  DP - K

• After the system recovery Accupoint does not work on the Satellite

  After a recent system recovery I can't accupoint to work.
  In Control Panel, or in devices, there is no sign of accupoint.
  Where can I get the accupoint driver?

  Could you please put you name of the laptop?
  Thank you.

  Accupoint is a part of the options touchpad or mouse.
  Usually, you can find under control panel-> mouse-> advanced or something like that.

  Check it!