Update Windows xp caused my computer blue screen and now will not start.
Update Windows xp caused my computer blue screen and now will not start. There has been no change to my system hardware or software otherwise. After that windows update Setup, he asked to restart the computer. When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work. None of these mode of work, not to shelter or otherwise. The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.
It's really annoying because I have important files on this computer work and can't afford to get in shape! I put my confidence in using windows and keep it updated. During the installation of your updates, it made my system fails and does not restart. I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!
Any advice on a solution? I need to get this computer work as soon as POSSIBLE.
Ben River
I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.
If nothing else works, try reinstalling your operating system. It worked for me.
Tags: Windows
Similar Questions
-
Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?
It would be helpful to post what the screen says.
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
-
Updated FF, stuck computer had to turn off the computer and now will not start.
Toshiba Satellite PC running Windows 7.
Received message there was an update for Firefox. Manually, clicked on it. After restarting the computer (as shown), I clicked on the Firefox shortcut icon and the Office froze. CTRL/Alt/Delete didn't work - nothing worked so forced the laptop turns off, press and hold the power button until it did.
WAITED a few minutes and then turned the monitor never came to top - just stayed black. After a second attempt, that the computer turns on, the keyboard lights up but screen stays black. NO.
problems before trying to update to Firefox.I write this on my Mac, as there's no way to use the PC with a black screen.
Have you checked that the monitor is connected correctly and that all cables are connected entirely?
-
whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.
Hi leonardhurley,
Since when are you facing this problem?
You did changes before this problem occurs?
What is the exact blue screen error message you received?
Method 1
I suggest that you perform the last good known Configuration
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.
Method 3:
I suggest you to follow the article below for the Blue error screen.
-
Microsoft windows fax and scanning will not start on my computer laptop windows 7
Microsoft windows fax and scanning will not start on my computer laptop windows 7
Original title: fax and scanning
Press Windows key + R
Type: optionalfeatures.exe
Press enter
Expand Print and Document Services
Uncheck the fax and scan Windows
Click OK
Reboot if prompted
Press Windows key + R
Type: optionalfeatures.exe
Press enter
Expand Print and Document Services
Check fax and scan Windows
Click OK
Reboot if prompted
-
Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday
Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?
-
using Windows vista and supported will not start
Windows vista help and support will not start. Is it possible to download and re - install this feature.
In addition to the guidance of Kim, I also recommend looking at responses MVP mind x here.
-
I downloaded the application, and all I get is a black screen. It will not start what is wrong?
-
Windows Update will not be updated, and then will not start
I just got an update for Windows Update on my computer last night. He kept saying 'installation' for HOURS. Finally, I turned the computer off and tried to restart. He said "insufficient sytems API resources." Ok is pressed, and stops when you restart it, it does the same thing. I can not in safe mode. Please notify.
Hi Candy_992,
· Updating what windows you are referring to?
Follow the suggestions below for a possible solution:
Method 1: Try to boot the computer using the last known good configuration, you can check the link for the steps below.
How to start your computer by using last good known Windows XP Configuration
http://support.Microsoft.com/kb/307852
Method 2: You can also read the article and check mentioned below.
How to fix a computer that does not start
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
Let us know if that helps.
-
I got blue screen and now my elitebook 8440p screen does not come on at all
I installed TuneUp Utility and after use and restart my system, I got blue screen. I restarted in safe mode and still had the blue screen. Now, my screen does not come on at all. When I start it up, all the lights come on. caps and num locks juices flashes three times and turns off.
I don't know what that is... problem can someone help pls?
thnx ToffbyIf the lights Flash 3 times when its engine, it is a failure of RAM or problem with RAM slot on the motherboard. You can find more information here
-
Windows Mail in the course of execution when power failure (vista) and now will not boot
When the power was restored, the microsoft mail will not start. He thinks, there is a version that is still running and will not start another. Master is not running any program. Banners suggest log off, and then try again. If the problem persists, start/stop. Basic work have tried several times. Computer can access the internet by using IE everything seems fine. The registry did get watered?
I think to clean the installation could be the fastest solution.
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesToHow to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093What is "safe w/data comm Mode"? I might need a translation for this. If Windows Mail works in "Safe Mode with networking" and not in Normal Mode, then something else is responsible for booting in Normal Mode is the cause.
Maybe your power outage also gives you a bucket of malware load? They say things happen in threes, maybe that your machine is about to die.
I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/MBAM.phpSuperAntispyware
http://SUPERAntiSpyware.com/They install and run in safe mode.
-
Windows Help and Support will not start.
My brother is running windows Vista, and the application help and Support Windows will not start. The exact wording is:
"Help and Support could not start. For more information, contact your system administrator or visit http://windowshelp.microsoft.com"
Clicked on the link but no help at all. A system restore would work, and if yes, what are the other effects there - he will have to reinstall all windows updates, service packs, etc.. ?
I could restore just the request of assistance? If so, what files can I restore and where are they located?
I stick with XP. Vista makes no sense to me and I can't find anything!
Hello lynndisplayname,
Thanks for posting on the Microsoft answers Forum.
Click on the article number KB and review of the article.
KB Article ID: 917607 -I can not open Help files that require the Windows Help program (WinHlp32.exe)There is a download in the article for 'Download WinHlp32.exe for Windows Vista'. Download the WinHlp32.exe file and see if ithelp to solve your problem.Sincerely,Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Windows hangs on the last blue screen and is unable to stop.
During the shutdown process, after downloading updated successfully, the is Windows XP hangs on the last blue screen "shutdown of windows. For now I just have to unplug it from the power supply to the stop card. I run a maintenance program, but it does not solve this problem.
Hi, Tinker,
1. you receive messages or error codes?
2 have. what maintenance program you tried running?
Method 1:
You can visit the computer manufacturer and try updating the chipset and video card drivers.
How to manage devices in Windows XP
Method 2:
You can also check if the problem occurs in safe mode.
To start the computer in safe mode
A description of the options to start in Windows XP Mode
You can also read the following article and check if it helps
Advanced Troubleshooting for shutdown problems in Windows XP
You can check in the event viewer to see if there are newspapers in events related to the issue.
For more information, you can consult the following article:
Procedure to view and manage event logs in Event Viewer in Windows XP
-
Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please
Hello
-Don't you make changes to your computer because of which the question began?
I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.
-
Windows 7 computer physical exported to the virtual machine and now will not boot on another machine
Hello
What I tried to do is the following:
Export/create a virtual machine from the current physical running computer. After it's done, I plug in the USB key which contains the files of virtual computer for a laptop and try to start this virtual machine. It does not start due to "recent changes". This probably means that the OS never will start, right?
This seems odd to me, or I can't understand what is happening here. I thought that to have a virtual machine means that the operating system could not doing the physical machine, it is running on, but just saw it is virtualized OS/machine.
I would like to "clone" a current physical machine and then run it on another PC is because we need to have a client machine, convert applications on it and then return either the image (if they already had a running image) or we have a complete script on how to convert/upgrade for that client applications so that the downtime will be minimal and maximum success rate.
Info:
VMWare Workstation 7.1.2
Windows 7 (desktop and laptop PC run this) 32-bit
Some clients running ESX and we want to take a picture of that and do the same trick as for workstation
A thinking about it?
See you soon,.
Steven
I bought a copy of Virtualization Manager 2010 at the time where converter couldn't handle windows 7.
Nowadays the 4.3 version should work well.
As mentioned previously, the mebdedded in my computer is very outdated.
On my site, you will find a howto for p2v 2008 r2 - this works for Windows 7 too - and it uses only free tools
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
Maybe you are looking for
-
Why is my Time Machine backup to a standstill?
MacBook Pro 10.11.2 I7 to 2.2 GHz 16GB 1600 MHz DDR3 Wipe the disc Time Machine and started from scratch. Trying to save the system itself and 1.25 to iTunes media since a Transcend 2 TB to 2 TB Seagate external hard drive: the external hard drive. I
-
TV tuners ~ Modulation of Amplitude quadrature (QAM) tuner
How will I know if I have installed on my computer Modulation of Amplitude in Quadrature (QAM) tuner? What is QAM & why it displays fewer stations? I just bought a TV tuner & don't know much. I have not yet installed. I want to assure you that I
-
Maximum refresh rate 1920 x 1080 XB280HK when using G-Sync.
I read this refresh rate maximum for resolution of 3840 x 2160 4K East of 60 Hz. What is the rate of maximum framerate for XB280HK in Full HD 1920 x 1080 resolution, when using G-Sync? Or limited to 60 Hz as well?
-
Adobe Creative Suite Master Collection issues
I've owned the main collection of creative suite adobe for years. I have an iMac desktop computer, but it doesn't have a disk driver. I was able to download the suite and typed in my serial number and everything worked until it tells me to insert the
-
Excerpt from PSD file located on hard disk
As I am not allowed to place the working documents, including the PSD file online, I can't use cloud creative for my PSD files, as our work files must stay inside our firewall, until the release will be.I so use the Extract function without the creat