Update wireless network errors, but everthing else connects very well

Similar Questions

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• iPhone 5 only connects very well with 5 Ghz Wifi

  Hi all

  After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.

  However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.

  I tried to reset, restore the default values, reinstall iOS... any suggestions?

  Hello iovin80,

  Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:

  Potential sources of Wi - Fi and Bluetooth interference
  Recommended settings for the WiFi routers and access points

  See you soon!

• Re-import does not? (camera connected very well)

  Background:

  * I have clips that have the icon of film in their breast, this seems to be due to a hiccup during the import occurs.

  Creating a project using some of these types of clips from this event worked well.  Project plays very well.

  * Trying to export there is no options, because it seems that you cannot include related camera clips

  * When you try to use the RE-IMPORT to solve this problem (with the [iPhone] camera connected very well), this does NOT work, and while I have a working project so there is no way to action and export the project

  How can question - I get this to work?  How can I solve what seems to be a problem of FCP with REIMPORTATION?

  NOTES:

  * Actual error message is below, but note the camera is connected.

  "All the selected clips from cameras that are not connected, and there is no camera available archives." If please connect the cameras and try to import again. »

  * If I'm going to just import the files nothing happens, because it seems that FCP already knows, has them.

  If you optimized your clips, in the file menu > delete the generated project files by > remove optimized media.

  Russ

• can not play the radio station, but sometimes it plays very well

  I noticed that I can not always the old Jill FM which is now Playlist 92.7 FM. Happened to me before that far from Jill FM, they changed. When I try to play live, sometimes it will play, but other times I get a pop up that sayscan not initialize the built-in player. Please press STOP and PLAY retry.

  But sometimes, it plays very well! That is what it is?

  Hello

  ·        What program do you use to listen to the radio?

  ·        Outside this station, you are able to play other stations without any problem?

  I suggest you play another station and check if the problem persists.

  If you use Internet Explorer, then I suggest you delete temporary files and cookies and check if the problem persists. Follow the steps mentioned in the articles below.

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  How to delete cookie files in Internet Explorer

  http://support.Microsoft.com/kb/278835

  I suggest to install the latest Adobe flash player on the system and check if the problem is resolved.

  http://www.Adobe.com

  Also, I would say to contact the Radio station support for assistance.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A single hard drive will not be shared on network. All other players share very well.

  A single hard drive will not be shared on network.  All other players share very well.  Don't have a homegroup installation because I also have XP machines.  The drive is on a windows machine 7.   I checked all the settings.  Of course, all the machines are on the same workgroup.  It's just 1 road.  The other 5 on this computer share very well.

  Hey Timmy,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, player does not network share.

  The problem may occur due to some network settings.

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps.

  Answer to us if you are experiencing problems with the sharing network or any Windows problem, and we would be happy to help you.

  Good day!

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Satellite M300-D4316 - wireless network detected but cannot connect

  Previously, I could use LAN wireless on my laptop but last week because I signed up to a bluetooth connection, Wi - Fi connection no longer works.
  It can even detect a wireless network around me; I don't see every time when I try to connect, & it asks me to diagnose the problem & said something like "the signal is too weak.

  I'm sure that is not the problem of wireless service - all my friends can connect to him!

  What should I do?

  Maybe the wireless LAN tipped off?

  Try to press Fn + F8 to toggle wireless devices.

  Also make sure that the wireless switch is turned on in the front and the sides of the laptop.

• HP Envy 5530 scans more wireless network home but does not print

  Love my 5530 desire!

  Through our wireless network, it will scan at anything, but it only prints my smartphone and iMac. It will not print laptop Packard Bell with Windows 8 (although it will scan to it).

  Tried to re-install the drivers on the computer laptop etc etc, but, although printer printed initially - it has stopped after a month or two. Are there problems of network with Windows 8?

  Any ideas?

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the icon of 5530 desire within the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• Wireless networking works, but cable dose not

  My NAT type has been closed and I opened my router page to see if the ports are open, they were not, but the fact is that I've wound up with making a single change to routers setting but now my wired connection does not work but my dose wireless. I have reset the router, the modem, does a system restored, reset the switch and no change. Internet pages just load and load and never expire while my wireless works fine, I do that through my phone, so I'll try to give you this info I can but if I have to type all of this will take a while.

  Windows 7 32 bit
  Time of modem Warrener (brand name not sorry)
  Linksys e1000 router
  And switch ezxs55w
  Let me know what information you need.

  Hello

  Do you receive an error message or error code?

  Try the following and see if it helps.
  
  Method 1:

  Run the Windows 7 network troubleshooting. http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2:

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Problems in Windows wireless and wired network connection:http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Problems connecting my computer to my wireless network when Photosmart C4780 is connected

  Hello

  I recently bought a new printer Photosmart C4780 wireless. It works fine via USB, but I seem to have problems when I try to set up with my router.

  Here's what happens:

  First of all, I run the Setup on the CD supplied with the printer (while connected wireless to my network).  I am going through the different steps and after Setup finds my network settings to give to the printer. After that, the Setup program tries to find the printer on the network.  It goes very well for about 4 or 5 seconds while the printer connects to my wireless... but then, once the printer connects, my computer disconnects causing an error Setup can not communicate with the printer because I'm not connected to a network.

  What is going on?

  If anyone can solve this problem for me, that would be amazing and be a great help!

  Chuck

  I'm sorry to say this but there are problems between SMC routers and HP printers.

  Search this forum MUCH info on the subject.

• Deleted Windows Vista Update wireless network adapter

  I had restore the computer to the old version after update.  Once the update has been made the computer could not see the wireless network card.  Any ideas?

  Go to the website of the manufacturer of your computer/network/computer adapter laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless network error (do not turn) even I did it?

  Hi, I turned ON my network without wire (with the switch on my laptop). No connection was detected (a cross has been posted in the signal bar). After that I did the 'repair' it not show my wireless network was not turn ON. I'm confuse or some conflict in the system?

  Help please! Thanks in advance...

  Hello

  Please contact Miceosoft answers.

  First, go to start-> type of performance information and tools-> click on Enter. In the window, click on "view and print detailed performance and system information. Windows that can be opened, access the network category. Search for the words WLAN or WiFi. Note the name.

  Then, go to start-> type devmgmt.msc-> press Ctrl + Shift + Enter. Click Yes if prompts UAC. In the window, go to Nwtwork adapters, expand it. Now, look for the name shown here. Select and double click it. In the window, under device status, if it is referred to as "this device is working properly", try retsrting the PC and if this fails, try updating the driver.

  If any other message appears as "the unit was able to start" or any other message, try updating the driver. If that too fails, contact the manufacturer, may be it will need replacement.

  See you soon.

• How can I disable the password appears in the box of wireless network properties security password when connecting always automatically?

  My netbook IBM X200s running Windows 7 is configured for you automatically connect to my internet TalkTalk router with the password defined. However, when I view the window wireless connections available in the taskbar and right click on the connection-> properties-security password is sitting in the area password - with the option to "display characters. How to turn off the box to show the password in the first place while retaining the automatic connection to the opening?

  Hello

  Welcome to the Microsoft community.

  Unfortunately, it is not possible to disable the password to appear.

  See this link for more information:

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  Please let us know if you need help with Windows.

  We will be happy to help you.