Update xc603 PCI E

Similar Questions

• Time to update buffer PCI-6713

  Hello guys,.

  We use PCI-6317for 50 Hz generation of waveform of 3 phases for a quite a while using the library OR-DAQ traditional.

  We could not get a reliable update of a waveform with a single call to the WFM_DB_Transfer function and need to call double.
  Otherwise, we could sometimes get a signal consisting of the buffer past and present.

  For now, that's a good solution, but now we have different requirements.

  We went to NOR-DAQmx and surprisingly managed to update the PCI-6713 buffer with a single call to DAQmxWriteAnalogF64. But it seems that we can update the buffer only once per period of output signal.
  For our 50 Hz signal is 20mS. Function until the next blocks.

  That is the first question.
  Can we call DAQmxWriteAnalogF64 wave update more often than 50 times per second for the output 50 Hz signal?

  If the answer is positive, how can it be done?

  I have attached a LabWindows CVI 7.0 source code for an example of test (for 1 channel only) program we wrote specifically for this post.
  The waveform generation is started by calling ConfigureTask and StartTask reminders in this list.

  Could someone kindly tell me what changes to the code have to do to update the asynchronous output with output buffer?

  And another question.
  PCI6317 can generate signals with different frequencies (channel 1 said generates 50 Hz signal, channel 2-60 Hz, etc.)?

  Thank you very much for all supplied glue!

  Andriy

  The answer to this question is no.  It is not possible to dynamically change the environment buffer output.  You must wait until the buffer is exhausted, and then change the stamp on the next set of data.

  The only thing to do with your current hardware is to reduce the size of form of wave/buffer.  You must call the function write significantly more often, but you can change it to any of these points.

  Also, get a reliable 3ms response in your software feedback loop will be entirely dependent on the speed of your computer.  If Windows decides it must allocate resources elsewhere (automatic update check, MS Word being opened, Media Player, play music), then the program CVI can certainly lag.  That's why he could miss the update of buffer, which is probably the reason why you get the error 200290. The code cannot run fast enough for all process before the depleats buffer.

  The absolute best thing to use to control is one of the FPGA modules.  With them integrate you actually in the material you want your control algorithm to be.  This means that the control algorithm is all timed material, producing the best possible response times.

  What rate are you inputing to the sampling frequency?  In addition, in the code you sent that you send "fFrequency * SAMPS_PER_GRID_CHANNEL" to the DAQmxCfgClkTiming function.  I wonder why you're multiplying your frequency of SAMPS_PER_GRID_CHANNEL.  The rate input parameter must be just the frequency in Hz you want items to be generated at.

• How updated peripheral PCI & what's this?

  Original title: PCI DEVICE

  HOW DO I UPDATE FROM PCI DEVICE & WHAT

  Hello

  You can get the answer to what is pci device

  http://www.ehow.com/about_5399638_pci-device.html

  and you can update the site to intel!

  Please mark as useful if it helps!

• Will be not updated of PCI device driver

  Hello

  I need assistance with 4 pilots who do not settle if I installed the new windows 7 on my hp pavilion m6.

  

  

  I tried everything I could but I did not get anywhere. Please advise on how to solve the problem. I really appreciate your help. Thanks in advance

  Hello

  Please try the following driver for the card reader:

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56956.exe

  You need more than just the PCI device, please post back others hardware ID.

  Kind regards.

• Update graphics PCI Express?

  I just buy an Evga Nvidia Geforce GT 430 PCI Express 2.0 card, but my computer has a PCI Express 16 slot, will it be compatible? They guy a tigerdirect has indicated it should be compaitble back but do not know, I buy for $43.50.

  HP p6714y

  Image AMD II 460

  1 TB harddrive

  4 GB of Ram

  Current graphics card integrated NVIDIA

  Windows 7 64 BIT

  Hello:

  It should work fine in your PCIe slot.

  I guess your 250W PSU be OK with the recommended by 300W P/S card.

  If it has HDMI output you must go into your BIOS after installing the card and change your on-board audio settings auto on "Enabled" as the card will more than likely turn off your car, then video don't be not alarmed.

  In addition, uninstall your current graphics integrated via the Device Manager. Right-click on it and select uninstall. If you have a box to check to uninstall the driver, make sure the box too.

  Instead of rebooting your PC, stop it and install your new card. Restart it, let it be discovered and then load the driver. Don't forget to move the monitor cable to the new card.

  Paul

• Impossible to update FW on Express PCIe Flash

  Hello! Any suggestions why the FW update fails? Thank you!

  [root@rac2 ~] #. / Express_Flash_PCIe-SSD_FRMW_WV046_LNUX_IPM0KD3Q_A04. BIN

  Collecting inventory...
  .
  Inventory collection failed.

  [root@rac2 ~] # nvme fw-journal/dev/nvme2n1
  Journal of the firmware for device: / dev/nvme2n1
  AFI: 0x2
  frs1: 0x51334446304d5049 (IPM0FD3Q)
  frs2: 0x51334449304d5049 (IPM0ID3Q)

  Product name: PowerEdge R730xd
  Serial number: CBGPR52
  BIOS version 2.0.2

  CentOS 7.2

  [root@rac2 ~] # uname - r
  3.10.0 - 327.10.1.EL7.x86_64

  4 May 20:16:51 rac2 kernel: NVMEPCISSD [5264]: Segfault at 0 00007f11089472d1 sp 00007ffcc1deff58 error ip 4 in libc - 2.17.so [7f11088c1000 + 1 b 4000]
  4 May 20:16:52 rac2 root: Package Update: Firmware PCIe SSS: exit code = 1 (failure) Journal of Support path=/var/log/dell/updatepackage/log/support/Express_Flash_PCIe-SSD_FRMW_WV046_LNUX_IPM0KD3Q_A04.log

  ===> Update Package application started<>

  Command:

  Date: Wednesday 4 May 20:16:47 PDT 2016

  =========================================================================

  Output ID: WV046A04

  The Update Package version: 15.06.200 (BLD_346)

  Collecting inventory...
  Inventory collection failed.
  ===> Update result<>

  Update has not been applied.

  =========================================================================

  = debug_inv.log newspaper begins =
  [2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 63: Logger initialized
  [2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 73: nvmePCISSDMgr before CNVMePCISSDManager;
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 47: enter CNVMePCISSDManager::CNVMePCISSDManager()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 49: the output file name is:
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 50: leaving CNVMePCISSDManager::CNVMePCISSDManager()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 77: before nvmePCISSDMgr.Inventory
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 85: enter CNVMePCISSDManager: Inventory()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 88: creating an instance of CNVMePCISSDInventory() using auto_ptr
  [2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 41: enter CNVMePCISSDInventory::CNVMePCISSDInventory()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 195: enter CNVMeAdapter::GetInstance()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 60: enter CNVMeAdapter::CNVMeAdapter()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 68: leaving CNVMeAdapter::CNVMeAdapter()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 204: leaving CNVMeAdapter::GetInstance()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 43: leaving CNVMePCISSDInventory::CNVMePCISSDInventory()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 95: call GetInventory() for inventory information in a vector
  [2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 78: enter CNVMePCISSDInventory::GetInventory()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 124: enter CNVMeAdapter initialize()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 125: installation of HAPI...
  [2016-05 - 04T 20: 16:50]: LinuxImpl.cpp: 320: CLinuxImpl::IsFileExistsAbs() name /opt/dell/dup64/lib/libdchipm.so file exist
  [2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 38: load the library using /opt/dell/dup64/lib/libdchipm.so
  [2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 45: HAPI is installed in the system
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 128: install successful HAPI
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 138: loading NVMePCISSD_LIBRARY to obtain the handle to the library
  [2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 320: file CLinuxImpl::IsFileExistsAbs() nom./libnvme.so exist
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 150: handle received from the NVMePCISSD_LIBRARY library. Initialize required function pointers
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 156: INFO: all requirements of function pointers initialized successfully
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 178: leaving CNVMeAdapter initialize()
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 318: enter CNVMeAdapter::DiscoverNVMeDevices()
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 324: appeal of the Samsung API to get data discovery/inventory of records of NVMe PCISSD
  = debug_inv.log Log ends =.

  Exit code = 1 (failure)
  Wednesday 4 May 20:16:52 PDT 2016

  Hello

  You can try updating through the regulator of the cycle of life or our on-line image? http://www.Dell.com/support/contents/us/en/19/article/product-support/self-support-knowledgebase/Enterprise-Resource-Center/enterprise-tools/support-live-image

• Example of reference for PCIe Data Streaming double 6537 s disc

  Hello world

  I have successfully changed the example of reference for streaming ( http://zone.ni.com/devzone/cda/epd/p/id/5315 ) for the card PCIe-6537 UNIQUE and able to write to the clock speed of 20 M (at end of initial test) without any error.

  However, I don't know how to view the *.bin file to check whether I wrote the right data. I saw an example VI called 'read the binary '. However, it is said "File already open" and gives a GPIB controller error (very odd). Should I try using MatLab? I doubt that this will help because it seems that the file write VI does not close the file correctly.

  I have attached the updated UNIQUE PCIe-6537 source code and the file with this post error. There are file support as well for writing file window live

  I'm the kind of new acquisition continuously and at high speed. Please let me know if I'm missing something. Thanks in advance.

  See you soon,.

  YK

  I have a few links you can go to more resources continuous here and here.

  The original question, you have posted using binary VI reading won't be able to because of the memory.  You can read more small segments of the file and keep the file intact.  There are a number entry that indicates the number of data items are returned by the function.  If you want to save multiple files, you can use any looping function to make it work, just set the condition to find out how much time and when to stop.  I don't know of a quick example that does this.  You read again all the data, but given that the readings are in small pieces, it will help the issue given that the data are not need a large space contiguous memory to reside in during playback.

  Data compression would be more than a post processing step rather than a step continuously, and it can slow down your stream if you were writing at the same time after your reading.  In producer/consumer architecture, you could read in the data and compress it before the record in a file, which would not affect the performance of your reading, it forms the data and create a file that is smaller and takes less space in memory.

• PCIe NIC is always on even during the closing to the down/standby mode

  Original title: network PCIe card is still on ie. the led is on after shut down/sleep mode

  How to achieve in WIN7 64 Office that a PCIe card/device network is always on it is to say. the conduit was on even after the stop down / start-up mode "Eve" ? I disconnected in control panel/Device Manager menu power saving / PCIe, but it has not solved the problem.

  Hello Greg,.

  Thanks for posting your query in Microsoft Community Forum.

  The issue may be due to several reasons. I'll be happy to help you with your query.

  I first suggest you run the network troubleshooter to verify.

  Refer to: using the troubleshooter from network in Windows 7

  You can try to update the driver and check...

  Follow the steps.

  a. click Spie.

  b. type Device Manager in the search box.

  c. develop the network card

  d. right-click on the device, and then click Update (Realtek pcie card).

  You too, try to install the latest driver from the computer manufacturer's website.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Problem installing Windows Updates error code is 80070002 and also unable to update the driver Qualcomm Atheros DWA-552

  Original title: qualcomm-atheros driver for dwa-552

  Since last week, I have a problem to update my adapter pci wireless d-link dwa-552. Windows is unable to install the update. Since this problem, my internet connection drop and goes to the limit. Is there a way to complete the update? Or the Qualcomm-Atheros driver is completely *? Here is what windows mean when I try to update my pci card. WindowsUpdate_error Code 80070002. Update Windows encountered a problem no? Windows has encountered a problem? Your kidding me? God miss me windows 7

  Thanks for the reply. In fact, I changed my internet adapter since so I don't have the problem anymore.

• HP Z420: Other devices (missing drivers)

  Hello world

  For the life of me, there are two devices in Device Manager that I can't seem to update:

  PCI serial port
  SAS controller

  In both devices, this is the last 2 timestamp description which is noted:

  PCI serial port

  1)

  Device PCI VEN_8086 & DEV_1D3D & SUBSYS_1589103C & REV_05\3 & 11583659 & 0 & B3 requires installation.

  2)

  Device PCI VEN_8086 & DEV_1D3D & SUBSYS_1589103C & REV_05\3 & 11583659 & 0 & B3 has been configured.

  Driver name: null
  The class GUID: {00000000-0000-0000-0000-000000000000}
  Driver date:
  Driver version:
  Driver provider:
  Section of the driver:
  Rank of pilot: 0x0
  Matching device ID:
  Advanced driver:
  Update of the device: false
  Device of parents: ACPI\PNP0A08\0

  I think it's the guest card Vantec PCIe RAID (UGT-ST644R).  I installed the drivers from Win10... but it does not go away.

  SAS controller

  1)

  Device PCI VEN_8086 & DEV_1D6B & SUBSYS_1589103C & REV_05\4 & a95f37b & 0 & 0088 has been configured.

  2)

  Driver name: null
  The class GUID: {00000000-0000-0000-0000-000000000000}
  Driver date:
  Driver version:
  Driver provider:
  Section of the driver:
  Rank of pilot: 0x0
  Matching device ID:
  Advanced driver:
  Update of the device: false
  Parent device: PCI\VEN_8086 & DEV_1D3E & SUBSYS_1589103C & REV_05\3 & 11583659 & 0 & 88

  Device PCI VEN_8086 & DEV_1D6B & SUBSYS_1589103C & REV_05\4 & a95f37b & 0 & 0088 requires installation.

  I don't know what helps me to do now... Any suggestions on how to solve this problem would be fantastic!

  See you soon,.
  -Richard

  Hi, Richard:

  The PCI Serial Port device needs this driver...

  This package contains version Intel Management Engine Software 11.0 for desktop models and operating systems supported. This package installs the latest drivers Management Engine Interface (MEI) and Serial-Over-LAN (GROUND), as well as the Intel Management and security status (IMSS), to support versions Intel Active Management Technology (AMT) 8.x and 9.x.

  FTP://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74499.exe

  Try to install the driver manually if automatic installation method does not work.

  Here's a partial copy and paste of the driver installation information file that shows the support of the drivers for the hardware ID you have posted.

  [Intel.NTamd64]
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1E3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1CBD & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1C3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1DBD & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1D3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_8C3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_9C3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_9CBD & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_8D3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_9D3D & CC_0700.
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_A13D & CC_0700.

  The 2nd device is a controller SAS of Intel and needs this driver...

  This package contains the Intel Rapid Storage Technology Enterprise (rest) drivers and the graphical user Interface (GUI) for controllers serial ATA (SATA) RAID in the models of desktop taken in charge who run a system of Microsoft Windows supported OS.

  FTP://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72212.exe

  Again, try to install the driver manually if auto installation does not work.

  Here's a partial copy and paste of the driver installation information file that shows support for the ID you have posted.

  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D60 & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D61 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D62 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D63 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D64 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D65 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D66 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D67 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D68 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D69 & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D6A & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D6B & CC_0107%
  ;

• Satellite A660 Wireless does not work: how to turn on the wireless switch?

  Wireless to the new laptop just stopped working. When I press Fn + f8 it says: Wireless Communication is disabled. Please activate the Wireless Communication switch.

  I tried to disable and enable wireless, update (Realtek PCie FE family controller) and Broadcom 802.11n network adapter driver and load the default settings in the Bios but nothing has worked. The button on the top panel wireless is turned on and when I press the button, a window called support thoshiba button jump upward and said: the key has not been configured. But this happens to other laptops also (we have 8 portable type, even), it cannot use the wifi. What can I do now?

  Post edited by: Jenny_1

  Hello

  Please reinstall the Wlana driver and try again. (Do not to update to uninstall the old driver, restart the device and install the new drivers)
  In most cases these disorders Wlan is displayed if the WiFi driver does not work correctly.
  Given that all other laptops are ok, I think that it is a temporal matter in the registry or something like that

  PS: It is possible that the FN buttons do not work corectly. Therefore, you can reinstall the VAP (value added package) and support of card Flash Utility so in order to reconfigure the FN keys.

  Welcome them

• Expansion / Upgrade ProLiant DL380 G5 and ProLiant DL360 G5

  Hi all, we have two servers, Proliant DL380 G5 with SmartArray 400 and Proliant DL360 G5 with SmartArray 200icontroller controller, expand us on the disks, memory and cards network, the problem is that after we see the documentation which is sometimes wrong and don't know not the limitations of each of the parties, the issues are:

  Proliant DL380 G5 SmartArray 400:
  - STORAGE: up to 8 SAS / SATA, not clear what size that can be used with this controller, we understand that up to 500 GB SATA 7200 RPM and maximum 2 TB SAS 7200 RPM, we currently use with 146 GB drives to 10,000 rpm, whose original documentation is the maximum allowed value.
  -MEMORY: Up to 64 GB modules of maximum memory up to 8 GB.
  - NETWORK: update with PCI Express, support cards that I can find are HP NC110T PCI Express and PCI-Express HP NC373 HP NC360T PCI-Express.

  Proliant DL360 G5 SmartArray 200i:

  - STORAGE: up to 4 SAS / SATA controller supports only 200i SmartArray four drives in RAID 0, 1, 1 + 0 if we wanted to expand to six bays that are available on the disk server, it would change the controller and memory. Yet, the size of disk maximum supported based on the documentation is 72 GB SAS and SATA drive 60 GB, but looking it seems as if you agree at least 300 Gb SAS disks at 10 000 rpm and up to 500 GB 7200 RPM.
  - MEMORY: up to 64 GB maximum memory modules up to 8 GB.
  - NETWORK: update with PCI Express, support cards that I can find are HP NC110T PCI Express and PCI-Express HP NC373 HP NC360T PCI-Express.

  This is what I have gathered and what interests me in the expansion and to say that the documentation I found to give the feeling of this conflict, is perhaps by the dates of their procedures, but before you make a payment would guarantee the purchase. Also getting information guides, manuals and forums, I have also consulted compatibiliy HP Proliant Server Guide, so I have consutlado with HP before purchasing, but have yet to receive an answer.

  A greeting and thank you very much

  Hello jranerosc. I think you'd have better luck trying Business Forums of HP. You should get more specific help.

  Have a great day!

• HP pavilion p7-1534 Desktop PC Downgrade to Windows 7. Driver help!

  Hello!

  I am currently downgrading my pc of Windows 8.1 for Windows 7 so now I have two of the operating system on a Dual Boot until I have finished Windows 7 then I'll remove windows 8.1. My only problem is that the drivers recommended by other messages of the forum do not work for me.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/downgrading-to-Windows-7-64...

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/Windows-7-on-a-P7-1534/TD-p...

  I managed to install a driver with a success that is causing Amd Graphics Driver. But when you try to install one of the other drivers he will end in either "the update has completely failed. (259)"or"your system does not meet the minimum requirements for this update. Update has been canceled (9996). "Or a popup window that says"the program may not not installed correctly. (Option 1) Reinstall with the recommended settings? (Option 2) No, the program works correctly. »

  Help, please!

  Try The Original Ralink Wireless Network Controller Driver and Ralink Wireless Network Controller Driver Update for PCI\VEN_1814 & DEV_539B & SUBSYS_18ED103C & REV_00 and Atheros Original network controller driver for PCI\VEN_1969 & DEV_1091 & SUBSYS_2AE0103C & REV_08

  You can also use MediaTek downloads and Qualcomm Atheros AR816X QCA817X family of drivers for the respective network controllers.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows 8 BSOD

  Hello!

  I've been seen BSOD almost everyday and can't seem to understand.

  I uninstalled Avast and spin the Defender. I updated the Realtek drivers on the second to last most recent.

  Here is a link to the most recent minidumps and memory.dmp - http://1drv.ms/1g3uY3k

  I appreciate any assistance!

  Good eye, Ken. nVidia is also in the stack there as well.

  1. check the driver updates Realtek PCI/PCIe adapters of your manufacturers Web site. You can try the Realtek directly and - http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2 site

  2. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  Kind regards

  Patrick

• Equium L20-264: unknown device PCI after Bios Update

  Hi all
  I just updated the bios on my Equium L20-264 (PSL2ZE) to V1.80.
  After restarting windows XP has detected a new PCI device but no driver for it.
  Everything seems to work and all of the devices, I expected were there.
  The name of the device is device PCI PCI\VEN_1002 & DEV_437B & SUBSYS_00000000 & REV_01\3 & 0B0C5 13 c & 0 & A2.
  Any ideas?

  Hello

  Select this device and right click and install or update the driver.
  For the source of driver, please choose this path:
  C:\Windows\System32

  Check if the driver has been found.