Update XP Sp2 to Sp3. cannot access the web page update

The page cannot be displayed
The page you are looking for is currently unavailable. The Web site may be experiencing technical difficulties, or you may need to adjust your browser settings.

Please, try the following:

  • Click the Refresh button, or try again later.
  • If you typed the page address in the address bar, make sure that it is spelled correctly.
  • To check your connection settings, click the Tools menu and then click Internet Options. On the connections tab, click settings. The settings should match those provided by your local area network (LAN) administrator or Internet (ISP) services provider.
  • See if your Internet connection settings are detected. You can configure Microsoft Windows to examine your network and automatically detect network connection settings (if your network administrator has enabled this setting).
    1. Click on the Tools menu, and then clickInternet Options.
    2. In the connections tab, click LAN settings.
    3. Select automatically detect settings, and then clickOK.
  • Some sites require 128-bit connection security. Click on the menuhelp and click About Internet Explorer to determine what you have installed the security force.
  • If you are trying to reach a secure site, make sure that your security settings can support. Click on theTools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
  • Click the back button to try another link.

Cannot find server or DNS error
Internet Explorer

I can access other web pages OK.

Burty,

See... http://support.microsoft.com/kb/265847 this article has been written about products for which microsoft no longer offers support. Accordingly, this article is offered "as what ' and longerbe not updated

Tags: Windows

Similar Questions

  • cannot access the web page of WAP but can telnet

    Can someone tell me why the following configuration won't let me access the web page of the WAP?

    version 12.2
    no service button
    horodateurs service debug datetime localtime
    Log service timestamps datetime localtime
    encryption password service
    !
    hostname EwingWAP
    !
    logging buffered information
    enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
    !
    username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
    clock timezone IS - 5
    clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
    IP subnet zero
    !
    !
    Bridge IRB
    !
    !
    interface Dot11Radio0
    no ip address
    no ip route cache
    !
    SSID tsunami
    open authentication
    Comments-mode
    !
    base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
    threshold RTS 2312
    root of station-role
    Bridge-Group 1
    Bridge-group subscriber-loop-control 1
    Bridge-Group 1 block-unknown-source
    No source of bridge-Group 1-learning
    unicast bridge-Group 1-floods
    Bridge-Group 1 covering-disabled people
    !
    interface FastEthernet0
    no ip address
    no ip route cache
    automatic duplex
    automatic speed
    Bridge-Group 1
    No source of bridge-Group 1-learning
    Bridge-Group 1 covering-disabled people
    !
    interface BVI1
    IP 172.18.86.5 255.255.255.0
    no ip route cache
    !
    default IP gateway - 172.18.86.1
    IP http server
    IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
    y/1100
    radius of the IP source-interface BVI1
    1 channel ip bridge
    !
    !
    Line con 0
    line vty 0 4
    local connection
    line vty 5 15
    local connection
    !
    NTP-period clock 2860650
    NTP 208.90.144.53 Server
    end

    Hi Jason,

    Have you tried the default user name and password?

    Username - Cisco

    Password - Cisco

    Please try the commands below and let me know how it works...

    en

    conf t

    AAA new-model

    local IP http authentication

    end

    Try to open the WEB GUI by using the configured user name and password...

    Concerning
    Surendra

  • Cannot access the web page of the wrt54gx router

    I configured my wrt54gx as point of access by disabling the DHCP and assigning static IP address 192.168.0.6. My main router is a wrt310n. My access point works very well when it is connected with a wire to the wrt310n.

    I want to reonfigure the wrt54gx to use it as a main router again. To do this, I am unable to connect to the webpage wrt54gx.

    Any suggestions?

    Thank you

    You should be able to connect to the WRT54GX and configure it from there.  If it does not, simply unplug the WRT54GX of your other router and reset to the default values by using this procedure:

    To reset your router by default, follow these steps:

    (1) turn off all computers, the router and the modem and disconnect from the wall.
    (2) disconnect all the wires of the router.
    (3) turn on the router and let it start up completely (1-2 minutes).
    (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
    (5) turn the router.
    (6) connect a computer cable to port 1 of the router (NOT to the internet port).
    (7) turn on the router and let it start up completely (1-2 minutes).
    (8) the power of the computer (if the computer has a wireless card, make sure it's off).
    (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
    (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

    If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

    If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

    If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

    If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

    Please let me know how things turn out for you.

  • try to pay some bills and cannot access the Web page. I make each month and do not know how to correct it. does not that this program can not display the page's Web site

    happening only on a few sites of bill payment.

    Hello

    1. what internet browser do you use?
    2. If you are using Internet Explorer which version do you have installed?
     
    If you use Internet Explorer see the methods below.
     
    Method 1.
    I recommend you follow the steps listed in the article below and check.
    You cannot connect to or connect to Web sites in Internet Explorer secure
    http://support.Microsoft.com/kb/813444

    Method 2.
    If the problem persists, add sites to the trusted Web site and check. Refer to the article below for the procedure.
    Security zones: adding or removing websites
    http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Gets the user cannot display the Web page when she tries to connect to hotmail.

    I try on another pc in which the user of that pc had its hotmail upward.  She took him out and tried to connect to his account and got the cannot display the Web page. She said she crossed and tried all of the suggestions that he gives.  I tried to use Internet Explorer and Firefox.  When the user is at home that she can get hotmail.  There is no settings on our firewall prevents the user to access hotmail.

    Hello, Tiffany Walker,.

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • having a wireless connection can only connect at home, at work, he says internet explore cannot display the Web page

    I have a laptop when I use the wireless at home I have no problem, but when I use the internet at work I can not connect it says Internet Explore cannot display the Web page so I have no internet access

    Can you help me

    Try to run diagnose connection problem, if it is in the work, you will probably need to configure some additional things such as VPN or Proxy, try to contact your IT Department and ask them.

  • When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

    hyperlinks in emails in incredimail

    When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

    When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

    You must contact the Support of Incredimail for that matter.

  • I downloaded the Adobe Premiere Pro CS6 product for free trail.  Now, there is one last month, when I try click on 'buy now' cannot display the web page.  What is the problem?  The trail is over?

    I downloaded the Adobe Premiere Pro CS6 product for free trail.  Now, there is one last month, when I try click on 'buy now' cannot display the web page.  What is the problem?  The trail is over?

    Hello

    Contact please contact customer service

    Kind regards

    Gag

  • Cannot access the Web Configuration of RE1000 page once I have connected to my wireless network

    I can't access the Setup page of my wireless range Extenders RE1000 via IP 192.168.1.1 address once I have connected the Extender to my wireless network.  I was connected to the router via my mac and even took my mac out of wireless networks (just to be sure he wasn't trying to get to the IP 192.168.1.1 wireless.

    It happened a few times.  After it happened the first time I reset the access point and was able to get back to the web administration page.  I updated the firmware and exactly the same problem repeated once I plugged in my network home.

    This is a security feature? (Perhaps once it's on the wifi network you don't want just anybody access admin functions...?) A bug?  Or something else?

    Thank you

    If you don't set a static on the RE when IP address configure it on the connection of the SSID, it will grab an IP address from the router. You need to look in the router DHCP client table to find the RE of the new IP address. You can also use a reservation DHCP from the router to assign an IP address to the STIMULUS, but static IP is the best.

  • Help, please! Cannot access the web after connected to the VPN

    Hello

    I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

    Here is my setup, can someone help please?  Thank you very much

    ASA Version 8.2 (5)

    !

    host name asa

    xxxxxxxxx.com domain name

    enable the encrypted password xxxxxxxxxxx

    xxxxxxxxxxx encrypted passwd

    names of

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.1.1 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address dhcp setroute

    !

    passive FTP mode

    area of zone clock - 8 schedule

    clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

    DNS lookup field inside

    DNS server-group DefaultDNS

    Server name 107.204.233.222

    name-server 192.168.1.3

    xxxxxxxxx.com domain name

    inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 192.168.1.0 255.255.255.0

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    the ssh LOCAL console AAA authentication

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    Crypto ca trustpoint _SmartCallHome_ServerCA

    Configure CRL

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH 192.168.1.0 255.255.255.0 inside

    SSH timeout 5

    Console timeout 0

    interface ID client DHCP-client to the outside

    dhcpd outside auto_config

    !

    dhcpd address 192.168.1.5 - 192.168.1.36 inside

    dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

    dhcpd allow inside

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal strategy group xxxxxxxx-sc

    attributes of xxxxxxxx-sc group policy

    value of 107.204.233.222 DNS server 192.168.1.3

    Protocol-tunnel-VPN IPSec

    XXXXXXXXXX.com value by default-field

    xxxxx xxxxxxxxxxx encrypted password username

    Strategy Group-VPN-xxxxxxxx-sc

    remote access to tunnel-group xxxxxxxx-sc type

    attributes global-tunnel-group xxxxxxxx-sc

    address sc-pool pool

    Group Policy - by default-xxxxxxxx-sc

    tunnel-group xxxxxxxx-sc ipsec-attributes

    pre-shared key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    call-home service

    anonymous reporting remote call

    call-home

    contact-email-addr [email protected] / * /

    Profile of CiscoTAC-1

    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

    email address of destination [email protected] / * /

    destination-mode http transport

    Subscribe to alert-group diagnosis

    Subscribe to alert-group environment

    Subscribe to alert-group monthly periodic inventory

    monthly periodicals to subscribe to alert-group configuration

    daily periodic subscribe to alert-group telemetry

    Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

    : end

    Hello

    Try adding the following commands

    permit same-security-traffic intra-interface

    NAT (outside) 1 192.168.1.96 255.255.255.240

    Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

    In this case, these configurations should do the trick

    In order from top to bottom, they would do the following things

    • First remove the pool VPN and VPN configurations
    • Then remove the VPN pool
    • Remake of the VPN Pool with different network
    • Reattach the VPN pool for VPN configurations
    • Configure NAT0 to the new cluster of VPN
    • Remove the old line of the ACL of the configuration of NAT0

    attributes global-tunnel-group xxxxxxxx-sc

    no address-sc-swimming pool

    no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

    IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

    attributes global-tunnel-group xxxxxxxx-sc

    address sc-pool pool

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

    no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

    Of course you also have the NAT configuration for VPN pools new Internet traffic

    NAT (outside) 1 192.168.2.0 255.255.255.0

    Please rate if the information has been useful if this resolved the issue as mark responded.

    -Jouni

  • Cannot access the settings page for adobe flash player for installation

    Hi guys, I have a Samsung android Tablet and I used to use adobe flashplayer until a recent update a few days ago. After the upgrade, I found that I can not see the pages on preview versions https://settings.adobe.com/flashplayer/mobile/f books on Google books. Briefly been searching the net I found that I need Flash for this function.

    I manually downloaded flash player from the flash player Web page archives 11.1.  Even if flash player is now installed, everytime I try to open it, I am directed to a page online - https:// settings.adobe.com/flashplayer/mobile. This page is still empty.

    I would be grateful if someone could guide me on how to access the settings page

    Kind regards

    Roman.

    Changed using Flash Player as it is irrelevant to the beta.

    Adobe no longer manages the Flash Player for Android, and he received no security updates in ages.  We strongly recommend that uninstall you it.  In addition, there a lot of malicious software distributed as a player from sources who are not Adobe Flash.  To minimize your risk of malware, only install applications directly from Adobe or through Google.  The vast majority of Android malware infections from the summary use third-party app store.

    If you absolutely need Flash Player for your mobile device, there are a few browsers that operate a Linux Flash Player based in a data center and broadcast content to your phone.

    Puffin Web browser - the fastest mobile browser with Flash support on cloud on iPad, iPhone and Android.

    Flash Player photon & browser - Android applications on Google game

    Thank you!

  • The user cannot access the web analytics

    I can't a user unable to access the web tests. When the user attempts to log in they get an error box will appear with "an error occurred during initialization of the boot options.

    I heard that this may be because of outdated java, so the machine has been updated, but the problem persists.

    any ideas guys?


    Thank you very much

    Russell

    This problem occurs mainly due to user 'null '.
    You can try the following:
    1. service and return the available to the user.
    2 delete and re-create the user.
    3. ensure that the user is able to connect to the workspace.

  • From high-speed wireless broadband with a cable modem, and shows the connection, but cannot access the web w / IE8

    I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.

    However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.

    Any ideas? Thank you!!

    JFerguson15,

    If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot access the login page - get ' APEX_AUTHENTICATION. GET_LOGIN_USERNAME_COOKIE' must be declared

    I googled this problem on Google/here until my eyes is red...

    • I have a local instance of 11 GR 2 Oracle running on Windows 7/Dell computer laptop
    • APEX 4.2.5.00.08 is installed
    • Oracle REST data services (formerly APEX Listener) is running in stand-alone mode
    • The database is up and accessible via SQL * MORE and TOAD
    • I can access the administration page of the APEX at http://localhost: 8080/ADR/f? p = 4550:10 and navigate between options with success
    • Yesterday, I was able to access the login pages of the Application Builder/End User without problem
    • Today-

    Capture.PNG


    Capture2.PNG

    It seems that something was badly damaged in the file of the application, but I can't seem to find it. I put in the database market and Restful Services, I re - compile all the objects for APEX_040200, APEX_030200, APEX_PUBLIC_USER and APEX.

    And since I can't even at the request of the manufacturer, I am completely stuck. I don't have (consciously anyway) to install plug-ins, but something seems to have went wrong.

    Thought I'd make it here until I leave but a re-install.

    Thank you

    John

    Ended up having to blow the database, re-create the database and re-install APEX. In the end, it appears something was badly damaged, but I could not understand that.

  • by clicking on download free firefox internet explore announcement that cannot display the Web page

    Firefox has stopped working on a single computer. When I click on the Firefox icon, it says "cannot find Mozilla runtime" has happened several times in the past and every time that I just did a free Firefox download it again and it fixed the problem, now when I try to make the free Firefox download internet explore says it cannot display this Web page. I tried to do a free download of Firefox on all three computers in my office and get the same message even on computers where Firefox works correctly.

    Download the installer of Firefox on another PC of https://www.mozilla.org/en-US/firefox/all/ and transfer it to the problematic PC via a USB key?

Maybe you are looking for