Update XP to win 8 needs Conversion from FAT to NTFS but CONVERT. EXE does not, any more than CHKDSK, jumps to restart

Similar Questions

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Update Windows 10 November (10586 aka 1511): bcdedit/set hypervisorlaunchtype off, but VMware Workstation does not start VMs with conflict of Hyper-V

  Hi all

  I upgraded from Windows 10 Windows 10 November updated this morning.

  I have the Hyper-V role is installed and use it from time to time, but bcdedit to configure the boot loader to disable Hyper-V by hypervisorlaunchtype power off.

  This technique has worked with 10 Windows and VMware Workstation and I could start and run virtual machines

  Since I did the upgrade, I can't start VM with this standard message "VMware Workstation and Hyper-V are not compatible"

  I am running VMware Workstation 10, but suspect that this problem also exists with later versions.

  Everyone knows about this problem?

  Someone at - he found a solution?

  I'm willing to fork over $150 for 12 workstations to solve this problem, but I want to know with certainty that it is circumventing my problem.

  Thanks for that.

  Uninstallation and reinstallation of the hyper-v feature, following the upgrade of Windows Windows 10 November 10 update solved the problem.

  I still need to run the following command to disable the Hyper-V technology

  bcdedit/set hypervisorlaunchtype

  Thanks to everyone for their help.

• My iPhone does not appear more than 6 iso 10 under software updates. I don't have a computer with iTunes. What should I do?

  MY Plus 6 iPhone does not show the new 10 software iOS to the title of the software update. I don't have a computer to iTunes. What should I do?

  Try leaving it plugged in the power of the day after. The servers are probably very overloaded. I have not being updated myself but will be soon.

• I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

  I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

  You should be able to resize the window pop - up to enlarge.

  You allow sites resize the popup window?

• Update soundcards site says I need to install the ActiveX control, but there is no bar at the top click or any other option to download.

  Update soundcards site says I need to install the ActiveX control, but there is no bar at the top click or any other option to download.  How can I download this control so I can access the Windows Update Web site?

  See if that helps-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

  I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

  Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

  The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

  Except for the above bit of luck, there are several ways to recover.

  1. use msconfig:

  Get your installation CD or locate a copy online
  Since an administrator account, run msconfig ( -R, msconfig)
  When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
  (This will open the window to "Develop a Source of Installation file")

  Enter 'mouhid.sys' in "file to restore:
  Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
  (or browse to...)
  Enter "c:\windows\system32\drivers" in the "save in:" entry.
  Click "expand".
  'mouhid.sys' is now where never told you develop to...

  2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
  You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
  the latest Service Pack, you have installed.

  From an administrator account, type: -R, sfc/scannow

  SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

  If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

  Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• How to change from fat to ntfs

  I'm trying to update my bios, when I went from vista 32-bit to 64-bit windows 7, I had to change most everything in my laptop. My laptop is an acer with all amd products. He came with a very high range graphics, but I've improved it best I could. I continued to get problems such as that of crashing and things like the normal blue screen, so I did a bit of reading on the problem and found that I need to update my bios to accommodate improvements to the rest. NOW IS where the bat hurt. My file system (NTFS) is I think that I spelled correctly, however I tried and tried to update without success. That's when I looked at the properties of the specific file and he said down that (FAT) is the host file. This is my problem and if so how can I fix it. I worked on it for a year or better - I REALLY, REALLY, REALLY GRATEFUL FOR the HELP!

  Hi Timcruce,

  As you are facing problems with the update of the BIOS (Basic Input Output System), I suggest you contact the manufacturer of the computer as they realese the BIOS updated.

  Warning: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Changing the file system from FAT to NTFS is recommended in the Windows 7 operating system. However, the change of the file system is not bound with BIOS update.

  You can see these articles for more information on the change of FAT to NTFS file systems:

  Convert a hard disk or partition to NTFS format

  http://Windows.Microsoft.com/en-us/Windows7/convert-a-hard-disk-or-partition-to-NTFS-format

   

  Comparing the NTFS and FAT32 file systems

  http://Windows.Microsoft.com/en-us/Windows7/comparing-NTFS-and-FAT32-file-systems

  Hope this information helps. Please return back with the results so that help you solve the problem.

• I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was invited to give my serial number for the update that was not the case that are on my Adobe profile, although I purchas

  I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was not invited to give my serial number for update is no where on my Adobe profile, although I bought and pays every month for my creative cloud for photography. Help, please

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• After having recently updated Firefox, I lost my menu bar Freecorder. I uninstalled and reinstalled but it still does not appear. It is in internet explorer, but not firefox

  Desktop running w7 64 bit

  To insert a toolbar in Firefox, Freecorder needs to install an add-on Firefox in addition to its own program.

  The standard response from their tech support is to uninstall and reinstall:

  I installed freecorder 4 audio, but the toolbar does not appear even after activation Add ons

  Freecorder Toolbar disappeared

  Without installing it myself, I don't know what else to think.

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.

• To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  If any document available please send my email id

  Thank you & best regards

  Martine

  Hello

  Thanks for posting your query to the Microsoft forum.

  Please see the suggestions in the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  There is a Snow Leopard update that would probably help.  It's called 10.6.8 Combo update.  Download and apply.  Then discover iTunes.

  https://support.Apple.com/kb/dl1399?locale=en_GB there is also a supplement that should also be downloaded.

  http://support.Apple.com/kb/DL1429