Updated 32-bit Windows to 64-bit?

Similar Questions

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Update for Windows Vista (KB2505189), updated platform for Windows Vista (KB2117917) Supplement - french and a security update Cumulative for the ActiveX for Windows Vista (KB2508272) stop bits

  I have update for Windows Vista (KB2505189), platform update Supplement for Windows Vista (KB2117917) - french and Cumulative security update for ActiveX Killbits for Windows Vista (KB2508272). These updates get the 8007371B error code. I have Windows Vista 32-bit. I searched the Microsoft catalog available and tried a manual installation for these updates, but they have always failed. I have not yet tried to install it in safe mode. Is there anything else I can do to fix this?

  8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  One or more required members of the transaction are not present.

  Only the specific return code can be solved by running system, aka CheckSUR update readiness tool -.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  CheckSUR for taken over all the versions of basic x 86 (32 bit) Windows Vista

  When you are prompted to save CheckSUR, choose to not run it.
  When the download is complete, close all open programs and browsers.

  If the installed antivirus is Firewall Norton/McAfee party or a 3rd is used, then suggest you first boot system configuration before you run it.

  NOTE: In the clean boot state will be disabled all firewalls of part 3. Ensure that the native Vista firewall is now enabled - enable Windows Firewall on or off

  Now run CheckSUR (. Windows6 0-KB947821-v12-x 86.msu).
  Restart the system for the same configuration of boot clean and do a check for updates in Windows Update in Control Panel.
  If the system can search, detect, download, and install updates now, save an update of a subsequent test.

  If the system can or cannot now, cancel the clean boot configuration and restart in normal Windows mode.
  See if the registered update installs now.

  If the system still cannot install the updates, please copy and paste the contents of one of the newspapers that CheckSUR created when he ran. They are located in and are named

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  If the system can install the updates in the clean boot configuration, but not in normal mode of Windows, then there are 3rd party software which is the origin of the update installation problem.

• How can I install Windows Update error 80244019 Windows 7 32 bit?

  How can I install Windows Update error 80244019 Windows 7 32 bit?

  Try to use this to reset the update system is very good,.

  Use Option 2 on the list after right click and select run as administrator

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Then right-click on ResetWUEng and select run as administrator

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this Option on the list and the Enter key to reset the update services...

  Press y for Yes and then the Enter key I think twice

  After that that he completed

  Type 15 for this option and the Enter key to restart the machine.

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

  

  Subsequently

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html

  Make sure that KB3020369 is installed, otherwise install it manually it is detailed with all versions, article page

  https://support.Microsoft.com/en-us/KB/3020369

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU

  Then manually install page article detailed KB3172605 with all versions.

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• Im getting 800737 error whille B install SP1 update for my windows 7 Home Basic 64-bit machine

  Im getting 800737 error whille B install SP1 update for my windows 7 Home Basic 64-bit machine. During the first installation, it has installed successfully. Later, I did a system restore to restore other software and I lost this update in this action. Then again tried to download the update system update, but the above error.

  Then tried to download the update from the microsoft Web site and install it using the standalone installer. I get the error SXS_TRANSACTION_Closed. I ran all kind of convenience store and disabled antivirus and erased all updates previous system and tried again from the first. I still get this error. Even the microsoft team is not able to support me. They want to do a re installation of windows. Is there any solution to fixing without format and reinstall. ??

  I hope this will help you

  http://www.techsupportall.com/how-to-fix-Windows-Update-error-80073701/

• Update code A 80071, 90, also the message cannot install update for microsoft windows KB978262 ActiveX stop bits

  I have many facilities update unresolved that failed, of which several have been labeled 'critical' is it possible that these updates were for windows 7 instead of my program which is the version of microsoft windows vista 6.0 over a few more numbers after that.

  Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.  It is not possible for Windows Update in order to send updates for the wrong operating system (but I can't go further and say that it is impossible, even if I never heard talk of such a thing).

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135 and then make the facilities.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot check the updates automatically. (important) windows 7 ultimate 32 bit

  Hello

  Please help me...

  

  Install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161608

  The value of the automatic updates to 'never check updates' and restart Windows before installing.

  Best regards, VZ

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• KB2686509 I'm having a problem loading update security for Windows XP (KB2686509)

  Update security for Windows XP (KB2686509)
  It has the following error code: 0x8007F0F4
  Using XP Professional with Service Pack 3 on a 32-bit system.
  My browser is Firefox 12.0.
  Anti-malware is malwarebytes 1.61.0.1400

  I tried several times and get the same error.

  Visit the link for help on error 0x8007F0F4

  http://support.Microsoft.com/kb/958051

• Update security for Windows XP (KB24811090)

  Error: high priority update. For Windows XP.

  Error message: update for windows XP (KB2481109) security failed?

  Tried to install several times. I coukd not find all the information about it or get installed it. Help

  Hello

  What is the exact error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to download the update manually and check if it helps.

  Download the update of security for 86 bits of the operating system: http://www.Microsoft.com/download/en/details.aspx?ID=11625

  Download the update of security for 64-bit operating system: http://www.Microsoft.com/download/en/details.aspx?ID=6799

  Method 2:

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Method 3:

  Try to install the update in clean boot mode and check if it helps.

  How to configure Windows XP to start in a "clean boot" State: http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting, make sure you try the steps to configure Windows to use a Normal startup state.

  Please refer to this article: http://support.microsoft.com/kb/2481109

  I hope that helps!

• Updates Microsoft and windows 10.

  Does anyone know why when I get updates, I get a 32-bit and 64-bit for my system? I choose only the 64-bit updates because my system is not a 32-bit machine, it is ok or I have to install the 32-bit updates as well, I ask this is because I don't want my hard drive with an update that does not serve its purpose not junk, and secondly when will I receive the upgrade of windows 10 that I keep looking for updates, but still do not have the windows 10 in my toolbar icon, how long should I wait. ?

  Try this. Hold the "Windows + R" button on your keyboard, on the run box, type "regedit" and navigate to Hkey_Local_Machine/software/Microsoft/windows/current Version/windows update/OSupgrade/create a new name change of DWORD(32bit) as "AllowOSUpgrade" right click to change the value to 1. In "Windows Update", click search for updates see if Windows 10 will be available to us. (Note that this method is not recommended, we must ensure that our current windows is fully updated before you upgrade to Windows 10.)

  For updates as long its says important, download and install it, just to be sure.

• error code 0x80073cf9 when downloading and updating applications on Windows Store

  Hi all, right now I am facing a problem to download and update of the applications from the windows store after an update of my windows. I am currently using 8 64-bit windows. When I try to download apps I get the 0x80073cf error code. Many thanks if someone can help me solve this problem.

  Hi Yang,

  Thank you for keeping us posted on the State of the computer.

  If everything has been removed from the computer and a Windows.old folder is created, then it is probably a Custom Installation or the reset which took place in the computer. But anyway, let's verify the present question in the computer.

  You said that you are not able to reinstall your apps from the Store. What exactly happens when you try to reinstall your applications on the Store? You get an error code?

  You can view the article at the following link once and see if information in there helps you get the resettlement app issue resolved:

  Why can't find or install the application on the Windows Store?

  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

  Don't answer if you need help with Windows problems, we will be happy to be of assistance.

• Windows Update fails in Windows 8, Windows 8 running on VM VirtualBox

  Original title: Windows Update failed in Windows 8

  Windows 8 Pro is installed on it; no antivirus, no 3rd party service.  I got the download of Windows 8 students of the MS upgrade because the license I had was for XP OEM.  Their online store said I couldn't go directly to 8.1.  In order to get the cleanest system, that I could get, I reinstalled XP Pro from scratch.  The MS store forces installation of the upgrade of Windows 8 to help them ensure the Download Manager.  Yes, steps up to now:

  (1) install XP OEM

  (2) install all the XP updates

  (3) download and install the upgrade to win 8 using the secure download manager

  (4) apply Windows 8 updates so I can finally get to the 8.1

  It may also be important to note that this facility is running in a VirtualBox VM.  I bought XP OEM disc when I got the laptop (Lenovo T520), but have always run Ubuntu Linux on the host computer.  So my reading on the Windows license is that I have no problem there.  The steps above take the largest part of a full day; so I'm a bit reluctant to reinstall again from scratch.

  Finally, the Windows process update Gets an update to KB2785094 which fails.  I got a few different errors and passed through all stages troubleshooting recommended in the KB and this forum that I could find.  Errors include 80073712 and 8024afff.

  Troubleshooting steps tried:

  (1) run the file system, by http://support.microsoft.com/kb/957310 Checker

  (2) attempt to relaunch Windows Update

  (3) run DISM, by the same thing.

  (4) attempt to relaunch Windows Update

  (5) run the Windows Update troubleshooting tool, by http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter

  (6) attempt to relaunch Windows Update

  (7) to run this Windows Update utility online by http://support.microsoft.com/kb/2714434/en-us

  (8) attempt to relaunch Windows Update

  9) restart in mode "clean boot", by http://support.microsoft.com/kb/929135/en-us

  It wasn't anything to turn off except the app tray Virtualbox Guest Additions, since it is essentially a new installation

  (10) attempt to relaunch Windows Update

  (11) see the same mistakes over and over again.  8024afff seems to have disappeared, but 80073712 keeps recurring.

  A problem I noticed with the application of the DISM is that article that says: "If your Windows Update client is already broken, use a Windows installation running as the source of the repair, or use a file side-by-side Windows from a network share or removable media, such as the Windows DVD, such as source files. To do this, run the following command instead:

  "DISM.exe / Online/Cleanup-Image /RestoreHealth/source: C:\RepairSource\Windows /LimitAccess.

  Unfortunately, due to the screwy way, Microsoft provides the installation files during the upgrade as I did, I'm not aware of having any source of repair.  If anyone knows where the secure download manager puts installation files that could serve as a source for execution of DISM?  Other other ideas that made the exact same installation and expect a different result (one definition of insanity)?

  Thank you

  HI Mel,

  Thanks for posting your query on the Microsoft Communities.

  Appreciate your efforts in order to solve this problem.

  I wish to inform you that since your Windows 8 operating system runs on Virtual Box VM, I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Why have I not been able to update icloud for windows since version 3.1

  I was not able to update icloud for windows since version 3.1. Whenever it fails and rolls back to the previous version that I have

  Have you tried to remove the old version first?

  Earlier, I encountered a similar problem: Impossible to iCloud update for Windows.

• Windows restart as soon as try to update drivers in windows on mac pro Book 10

  Hello

  After so much hassle to install windows on my mac 10, some of the features such as graphic and sound card do not work, I try to install the driver using bootcamp, however, they are not compatible with windows 10, and then I try to download driver manufacturers, such as the intel and amd, however, as soon as I try to update the driver windows will restart. does anyone have a solution?

  You have an identical question in windows restart as soon as try to update the drivers in windows 10 mac pro book .

  What is the model of the year of your Mac?

• Where can I find the download more updated of the Windows Migration Wizard?

  Where can I find the download more updated of the Windows Migration Wizard?

  Article Apple describing the use of the Windows Migration Wizard that is located here – move your data from a Windows PC to Mac - Apple Support

  This article includes a link to the download page for the latest version and the download page is here - Migration of Windows Wizard v1.0.5.7

  It does not seem to have been updated for a couple of years and doesn't mention Windows 10. While many the most applications that are compatible with Windows 7 and 8 works perfectly under Windows 10 I can say from personal experience, if this also applies to the Windows Migration Wizard.