Updated 9.3 and problem with Notes

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• Hi, I can't save all plunge on Icloud? This is the new update of softwer have problem with that?

  Hi, I can't save all plunge (6 IPhone / IPhone 5 / and my ipad on Icloud? is the new update of softwer have problem with that?)

  (1) disconnect from the iCloud and reconnect and try backup

  (2) backup on iTunes then restore the device to factory settings. Try the backup in iCloud. If it works, restore your device from the backup you made to iTubes

• Microsoft It - fix diagnose and repair Windows and problems would not install on my computer. He said the chain was not in the right format. Clues?

  I installed Microsoft Fix It on my computer (MSXP). The diagnosis and repair of the Windows files and problems would not install on my computer. He said the chain was not in the right format.  Clues?

  Hi Kathryn1713,

  ·         You are not able to run the Microsoft Fixit tool?

  If so, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.

  Microsoft Fix Center - NO support general questions Forum

• I have problems with not displaying pop-ups do not and or video.

  Since the update to El Capitan on my Macbook Air early 2015, I experienced problems with some pop-up windows is not displayed and the video content. The sites vary from one to another. I have Adobe Flash Player, the two NPAPI and PPAPI and Adobe Shockwave and Java installed. Any suggestions or comments would be appreciated.

  Try this, if you have not already.

  Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

  Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

  Hi ephd,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Internet Explorer is slow? 5 things to try

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can see these articles for more information:

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• iPad2 and problem with the SIM card after update

  even after the 9.3.1 last updated continuously having problems with SIM TIM card network.

  I changed and I tried with another SIM card but the problem remains.

  I did have all those problems with 9.2.1.

  Apple could intervene and solve these problems? Otherwise, I think it's better to make a return to the old 9.2.1.

  Thank you

  Do you see the network? and is it strong enough?

• Update of the FP and problems with YouTube

  I've just updated flashplayer to 10.2.156.32 and now I'm having problems posting videos on YouTube.  I always get the audio, but the video does not (no x red in the corner screen, just blank where the video should appear).  I can still watch videos (and get the audiou too) on other sites, such as Yahoo!.  I am running Windows XP and IE8 (32-bit).  I tried to adjust all my security settings of variuos, Shockwave Flash Object is activated in my modules.  Ideas or suggenstions on how to solve this problem?

  Hello

  Could you by following the instructions on this page to enter information system to help us figure this problem out?  In addition to the DXDiag report, if you could add also the content of that message to the email (or a link to the post) would be great!

  To solve this, I would recommend two things.  The first step to try is updating your driver video card (ATI, NVIDIA, Intel.)  It has helped a number of users, and we would be very interested to know how it works for you.  It becomes even more interesting if you can run the DXDiag report before update.

  If this does not help, the next suggestion would be to disable hardware acceleration.  The steps to do this, you can find here.

• Satellite L500 and problems with the Wi - Fi

  Hello people

  I'll just throw my problem there.
  First of all my details and information that can help me to help you!

  Satellite L500 running windows 7 (note: same problems when installing Vista)
  Latest drivers wireless as well as the latest drivers for everything.
  My wireless router is 1 billion active voip 7000 series sound quite good for when I got it about 2 years ago and works well.

  Basically, the problem is that the wireless on my Satellite L500 keeps dropping out. I m not more than 20 meters at most, right now I m 10 m with 1 wall in the way. I tried to make a website, and he says has fallen to either unable to find host connection.

  However other computers laptops in the same room, same place at the same time has no problem at all. Has ever.
  As soon as I'm in the same room as my router, it works again. Sometimes works if I stand right on the opposite wall.

  So basically I m thinking my card wireless in my laptop is defective or simply not good?
  Can u replace the card with another wireless? Maybe the Toshiba ones are just no good? I read so many problems with these cards Toshibas wireless...

  Anyone have any ideas? I ran out of the info you need? I repost he's again in a day or two with the types of wireless devices in every laptop.

  Hello

  For the moment, I doubt that your wireless network card is broken. Before Exchange you it you must also update your BIOS and not only the WLAN card driver. Two updates you need to download it from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I had a similar problem with my Toshiba laptop and WIFI connection. The problem was in the WLAN energy saving mode Windows power management. Here, you can also choose a mode for energy saving wireless network card. Turn it off, and then choose a maximum Performance.

• I have an update for El Capitan 10.11.2 in the app store, but it will not be installed. Whenever I click it, it says the computer must restart, and when that happens, a dialog box appears saying that updates have changed and he does not apply.

  When I click on he App Store update, he said first a reboot is required, then it just happens before the restart, a pop up advising me that updates have changed and offers 2 options: 1) cancel, which does nothing and 2) show invisible characters, which also does nothing. I rebooted several times and it still does not work. What should I do?

  In some cases, this error message is caused by a problem in the network. Please restart your router and your device at wide band, if they are separated. If there is no change, see below.

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data and read this message before doing anything.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Problem with not to print all pages in a document with a HP Photosmart 7520

  I have a HP Photosmart 7520 networked printer.  If I try to print a document of medium to large sized (25 pages), it prints the first 20 without problem, but the remaining pages are incomprehensible and illegible. Initially, because it appeared that the problem was caused triny to print in the background with the closed document, so I tried to print the entire document with it open along the.  This no longer works.

  Hello CRC8591, I hope you are well

  I understand that you have a problem with printing a 25-page document that the last 5 pages are so do not print correctly and show to be unreadable. I want to help you with this question, the best that I can!

  I have a few questions to familiarize yourself a little more with the question and I have also some suggestions to start with.

  1. what operating system do you use?

  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  2. try to print the document of several pages of another program. It prints successfully elsewhere?

  3. the same problem occurs when you copy or scan multipage documents?

  Try:

   

  1. reset of the printer and leave unplugged for at least a minute.

  Plug the printer directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help this situation.

  2. check if the printer needs a firmware update: get the latest Firmware and updates

  Let me know the results!

  Have a great Tuesday

• Update Windows SP3 and DVD will not work.

  I show a history of update of. NETFramwork 3.5 and Service packs 3 dating back to May 2010.  At the same time, I lost the use of the DVD +-RW.  While I got the update automatic running, even when I try a download of express update, the system always says that I need. NETFramwork 3.5 SP 1, error code 0 x 643.  I tried all the ways suggested to get the update, but it fails every time.  The "Add/Remove" says they are listed, but why can't pass the download system say I need the. NETFramework 3.5.  I had been doing my backup on the DVD but were not that the device appears even now on the screen.  I don't know what else to do.

  [I needed a security related update to qualify you for a free Microsoft support.]

  See the section "How to get help", for example, http://support.microsoft.com/kb/979909

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a Windows Update support incident email request for free
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates 2478658 KB and KB2518864 could not install and cause a loss of internet connectivity

  Hello

  Updates KB2478658 and KB2518864 cannot be installed in my SBS 2003 and caused a loss of internet connectivity.

  A while ago, I had a similar problem, i.e. do not install and loss of internet connectivity after you apply Windows Server 2003 SP2 on SBS. In this case, we have solved the problem with the support of a Customer Support person Microsoft, a service through which we paid.

  According to the suggestions that I found in the Microsoft Web sites, I managed to remove everything that was installed by the KB2478658 and KB2518864 updates and the reinstalled successfully. I did these manually because I don't have an internet connection.

  After you have reinstalled the above mentioned security updates, I repeated all the steps that led to the problem of the previous time. Among the steps taken, have been indicated in:

  Common problems of networking after you apply Windows Server 2003 SP2 on SBS

  http://blogs.technet.com/b/SBS/archive/2007/04/24/common-networking-issues-after-applying-Windows-Server-2003-SP2-on-SBS.aspx

  2. 948496 an update to turn off default SNP features is available for Windows Server 2003 and Small Business Server 2003-based computers

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 948496

  Unfortunately, I was unable to restore connectivity to the internet this time.

  There is connection between the NETWORK card and router. I could ping the NIC IP address, but not that of the router (I get an "unreachable" message).

  I look forward to suggestions and recommendations to solve this problem. I have already paid once resolved a problem that was not directly caused by me and do not wish to do it again.

  Thanks in advance.

  JL

  Hi JL,.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to a problem with small business server. It should be better in the Windows Server Forums of business.

  Please post your question in the Windows Small Business Server Forums.