Updated graphics on MacBook Pro which has the iris intel pro 1536 and the card nvidia geforce GT 750 M

Similar Questions

• Tecra S2: How to change the card Nvidia Geforce Go 6600 64 MB to 128 MB

  Can anyone here help me how to change toshiba tecra S2 vga nvidia geforce go 6600 64 MB to 128 MB?

  Please help me, it's important to me.

  Best regards

  Thank you... for everyone

  Well, what to say.
  A GPU upgrade is usually undesirable because no one can tell if the laptop would be stable after this replacement. So generally I would not recommend doing these upgrades.

• I can't update my first macbook pro CC 2015 but need to edit a file that was saved the last with new version 2015.1

  I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?

  I already tried to deinstallate and reinstallate to the program...

  Would be very grateful for any solution... !

  Hi Eclumes,

  I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?

  I already tried to deinstallate and reinstallate to the program...

  Are you a specific error when you try to update the application?

  In the affirmative, please follow these troubleshooting steps:

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Thank you

  Ilyes Singh

• I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and they told me not to upgrade a third time.  Can I update or not and why?

  I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and I was told that I should not upgrade again.  Can I update or not and why?

  Upgrade what to what? We don't know what you're asking. Writing an effective communities of Apple Support question.

• I was in the middle of an update when my Macbook Pro closing in on me, and when he turned back, he wouldn't let log me into my account. Why is this happening?

  I was in the middle of an update when my Macbook Pro closing in on me, and when he turned back, he wouldn't let log me into my account. I know that my password and everything, but this isn't just me connect. I have to restart the laptop? If so is there a way I can save all my documents? Please help as soon as POSSIBLE.

  Was it a software update from apple? When an apple update requires a restart, it may take a little time so that it starts. If it do not, you can try a reboot. What year MBP and operating system you are running. If everything fails and you have the recovery partition. You can start on it and do a reinstall. This should not delete any personal files.

• First Pro CC does not open on the all-new MacBook Pro with NVIDIA GeForce GT 750 M

  I used to run the first Pro CC on my old MacBook Pro (mid 2010) very well with no problems. A few weeks ago I bought a brand new MacBook Pro and when I try to open PP, I get an error startup that reads "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I'm running on an end 2013 15 "MBP retina with 2.3 GHz Intel Core i7 and NVIDIA GeForce GT 750 M. I checked the compatiable for first Pro CC graphics cards, and the GT 750 M is listed as an acceptable. I did a lot of digging and can't find a solution anywhere. Can someone please?

  I solved this problem on my system by adding "read & write" permission for all of the Users/myusername/Library/preferences/Adobe folder and all its subfolders.

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• How to keep the Macbook pro screen and cin on position?

  How to keep the Macbook pro screen and computer in position 'on '.  I don't want the computer shuts down or cut unless I ask him to...

  If you talk to keep your machine to fall asleep, take a look at the caffeine.

• Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  is it because of power problems?

  Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.

• How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  Hello

  Make sure that D: is not the partition recovery including the manufacturer put there to make the recovery disks from and eventually to return your computer to how you bought

  You cannot combine C: and D: and their data using the Vista Disk Manager

  with Vista, you will need to save the data on D: - D: delete - and then extend C: into the now unallocated space where D: was to do a 1 partition 2

  read the tutorial below

  How to remove and extend a Partition with Vista disk management

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is back different physical storage

  Hello

  I am new to vCenter Server, so you can assume that I'm missing something obvious.

  I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:

  Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage

  I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.

  Thanks in advance

  The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.

  Here is how I solved the problem:

  1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.

  2. click on the host computer, and then click the Configuration tab.

  3. click on "storage".

  4. find the offending on the right data store.

  5. right click on the data store incriminated and click 'remove '.

  6. click on 'Add storage' in the top right.

  7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.

• I have a Macbook Pro laptop and Firefox Start Page will automatically load to turn on my computer. How can I disable this?

  I don't want a Start Page for Firefox to load automatically when I turn on my computer. help, I searched gave the suggestion (s) to your desktop go to start menu and run a system configuration to disable Firefox as start - I have a Macbook Pro laptop and have not been able to figure out where I can do the same thing - need help please

  Look in System Preferences > accounts > login items and remove Firefox from this list.

• Difference between Macbook Pro 13 "and 15" Exit screen

  Hello

  I know there was a difference between the new Macbook Pro 13 and 15 "video, maps, but is there a difference between their output capabilities? I am wanting to use this machine for Keynote, PowerPoint and video output for large-format projectors, mainly in 1080 p, but want to know if the two can handle higher resolutions. Thank you

  The 13 "and 15" Mbps will support the external resolution up to 3840 x 2160.

  Ciao.

• I have a MacBook Pro 2013 and installed from a disc of Lightroom 3.  I enter my serial number and it tells me it's wrong.  Why won't this work?

  I bought the product, have a serial number, and when I go to install from a superdrive drive, he told me that my serial number is not valid.  I have a MacBook Pro 2013 and it running Yosemite 10.10.5

  Thank you much for the help!

  Jericho

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare