updated my vivaz and the memory card is locked. How to unlock it?
Hi, I've updated my vivaz last night and I had no memory card because I didn't lose anything. When I put my card back in, he says its shoreline and enter a password. I never put a password on the memory card so how can I sort this and why did do it? It's not the 8 gb original you have got with the phone, it is a 16 GB san disk. Could someone help me with this please?
Should I qualified before, is that the update the phone does not affect the memory card based on its contents, but in some cases like yours, there is blocking it. Yes, the Vivaz is compatible with 32 GB cards.
Tags: Sony Software
Similar Questions
-
I was downloading photos and videos from a memory card to camera in a USB card reader. After that most of the photos and videos (about 245 to 249) have been downloaded, asked me to jump on the last bit. Now, no pictures appear in the folder where I kept them or on the memory card. I get an error message when I try to eject the card reader. How can I recover pictures, because this is my only copy?
Hi JanetSmart,
- Have you tried plugging the card on another computer to see if it works fine it?
- What is the file format of the file 29?
It could be a virus, I would also say that you download and run the latest Microsoft Security Scanner to scan the card and check if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Response so that we can better help you.
-
Sony camera and the memory card
I imported a number of photos of my Sony Cyber Shot DSC RX 100 to my Windows 7 photo gallery. Somewhere in the process, I shot some of them. I imported directly from my memory card. Now when I try to view pictures in my camera, it says "cannot display" - the error message also said on another "unable to turn" screen. Does anyone have any ideas about what happened and I can recover these photos in original size on my card?
Looks like you did with the camera connected to the computer and Windows to change the format (turn). I don't think you can export these back to the camera. With the large capacity memory cards, I suggest you not to change the pictures on the memory card and keep for a while before deleting.
Suggestion:
Do not connect your camera to your computer. Buy a memory card reader - they are inexpensive. In fact, most modern computers have a built-in SD card reader. Remove the memory card from the camera and insert it in the drive. Connect the player to your computer and treat it like any other thumb drive USB. The card reader is small and fits easily in your case of the camera, much better that the cables and such.
Much faster, without fussing over the drivers, no battery worries. This also means that you don't have to install anything on any computer to be able to copy your photos. It also lets you remove the lightening fast compared to in the camera memory card. Most of the software that comes with cameras is terrible.
-
BlackBerry Smartphones and the memory card applications
is there a way to downloap applications on the memory card and run those apps on the card?
You can for some applications only and it is a minority, as most of the applications cannot be implemented with external memory
Example is recipes Halloween BEIKS for BlackBerry
Snip http://appworld.blackberry.com/webstore/content/4121
This product is specially optimized for minimum memory requirements and optimal access speed. It can be installed on a primary or on a media card extension and once installed memory, do not require or use the network connection.
-
Phone smart BlackBerry Smartphones and the memory card appears not
I have a Storm 9530. When I synchronize with the Fund Manager for this. When I try to upload music, it says please insert a memory card and you reconnect to your computer. I have a card in there and have tried 3 different ones. It also displays all the icons on my desktop Mac blackberry. Card appear in the Options of memory. Auto enable mass storage Mode when connected is set to NO, is this true? Thank you
Hi dbond,.
Try setting Auto enable Mass Storage Yes and defining the MTP (Media Transfer) Protocol to disabled. This article should provide more information. http://bbry.lv/rqhkNV
I hope this helps.
-
in fact when I use my computer, unconsciously I clicked on BitLocker and my memory card is locked. After that I've faced some strange problems, even if my card is 4 GB and free space is 3.18 GB; While it shows that the memory card is full. Please tell me how could I unlock my card?
Hello
What is the brand and model of the memory card?I suggest you to refer to the links and check if it helps.In Windows 7 BitLocker Drive Encryption: frequently asked QuestionsHow to use the BitLocker Repair tool to help recover data from a volume encrypted in Windows Vista or in Windows Server 2008Note: Also applies to Windows 7.See also:BitLocker Drive Encryption
If the problem persists, try to disable and re-enable Bitlocker.
Steps to follow:(a) click Start and then click Control Panel.
(b) click on security.(c) click BitLocker Drive encryption.(d) if the user account control dialog box appears, check the action proposed is correct and then click on continue.(e) click on disable BitLocker.(f) click on disable BitLocker.(g) in the window of the BitLocker Drive encryption, click on turn on BitLocker.(h) close to the BitLocker Drive encryption.Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further. -
Can not copy the database of res folder and write to the memory card
I developed a small application using blackberry jde 7.0. I want to copy the database (.db) of res folder and write to the memory card. When I run in the Simulator, it throws exception "FileNotFound". But the file is located in the res folder.
Help me guys...
Here is the code
copyFile("/Demo.db","file:///SDCard/Databases/Demo.db");
//Copy to Memory card public void copyFile(String srFile, String dtFile) { try { FileConnection fconn; fconn = (FileConnection) Connector.open(dtFile,Connector.READ_WRITE); //if(!fconn.exists()) // if file does not exists , create a new one // { // fconn.create(); // } InputStream is = (InputStream)getClass().getResourceAsStream(srFile); System.out.println("read" + String.valueOf(is.available())); OutputStream os =fconn.openOutputStream(); byte[] buf = new byte[is.available()]; int len; while ((len = is.read(buf)) > 0) { os.write(buf, 0, len); } is.close(); os.close(); } catch(IOException e) { System.out.println("Exception"+e.getMessage()); } }
The exception is
File not found
«When I run in the Simulator he throws exception "FileNotFound".»
Which line is the rise of this?
You might find the code in the sample application SQLiteDemo, which does almost the same thing, useful in the study to determine what went wrong.
-
An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.
Original title: peripheral equipment
An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.
Thanks for your help.Christine.Hi Stefano,
Thanks for posting your question in the Microsoft Community.
This problem can be caused if the SD card is damaged or the card reader may not work properly.
1. What is the brand and model of the SD memory card?
2. What is the number of the model of the Packard Bell laptop?
3. you receive an error code or the message after inserting the SD card into your laptop?
4. have you made any recent hardware or exchange of software on your computer before the show?
5. have you tried to insert different SD card in your laptop?
6. have you checked the SD card in another computer?
7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?
8. is the specific question to a SD card or any type of cards?
9. are you able to detect the SD card in the Device Manager?
Open the Device Manager:
http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager
If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
Open the hardware and devices Troubleshooter:
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
For reference:
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
Laptop Pavilion g6 with end of module startup and the memory + beep
My laptop is a g6-1c58dx. I have problems with my cooling fan, so I went on the disassembly to enter the fan to clean the fan of was (?). So far so good. I think I'll have some kind of problem put the barrette back now however. I'm not positive on what side of the bar of memory has been upward when I took it out and I forgot which of the two players, is in. However, I tried with both parties in the two slots and still no dice. Whenever I hit the power button, the capslock key, the screen does not light and I get 3 long beeps followed two short beeps. I tried to find a good image of the memory card in the laptop somewhere online to see if I'm doing something wrong, but I couldn't find a pretty good. I went digging in the part of support rescources mentioned here have a few videos and others which could be related to my problem, but I could not find g6, only g1, g2 and g3. So, it's very late here. I worked on this all night. Could someone tell me what I need to do to stop the maddness?
Here it is:
https://www.YouTube.com/watch?v=_1I0kahnC4I
and
-
Connected by USB PS 7510: access to the memory card?
For the past year, I had my PS 7510 connected wireless to my home LAN. The memory card appears on my computer (Mac OS X) in my list of devices, and I could access the images that I had scanned it. Changes of houshold allowed me to change my setup and I chose to disable the wireless function and use the USB to connect to the printer. All functions work well, though the memory card is not visible or accessible from any of my applications. Access to the computer is the card memory limited to wireless connectivity? Best regards, Brian
Thanks for your effort.
I had already applied the way you suggested in your last post, but I've been through once again, deleting and adding the printer. No immediate joy. Then I took a look at the data in the system and I was wondering why I couldn't see even the card on the printer on the USB port. I was wondering, ad did what I should have done from the outset - I removed the card and reinserted and then he appearred in my list of device as you wish. I feel a little stupid for not having done this before.
Once again, thank you for the effort and support. I'll look to mark the post as solved.
Brian
-
How can I download pictures from the memory card?
photos from the memory card?
Insert the memory card into a reader of card memory connected to your computer. It seems to be another hard drive. Open it and copy the files.
-
Can not format the memory card
Canon that PowerShot SX 10 IS reformatted not 16 GB SanDisk Ultra. Camera says memory card error. Everything else seems to work on the camera. Is there a way to fix this?
Your camera specifications say that it will work with the following cards, memory card SD/SDHC, MultiMediaCard, MMC Plus card, HC MMC Plus card.
Some memory cards note their speeds by a "class." Canon cameras are recommended to be used with nominal class cards 4 to SD (Standard-definition movies) and class 6 for HD (high definition movies) or more because of the large amount of data written to the card. As long as map meets the following standards for the card, the memory card must be compatible regardless of class or the speed rating.
SD
Standard Secure Digital card supports up to 2 GB capacity. SDHC
Secure Digital High Capacity currently supports up to 32 GB capacity. MMC
Multimedia card supports up to 1 GB capacities. MMCPlus
MultiMediaCardPlus supports up to 4 GB currently. HC MMCPlus
High capacity MultiMediaCardPlus supports up to 8 GB now. -
Lost all my images on the memory card
I just bought an A2300 and he took on a week hiking trip in Colorado. At the end of the trip, I took the memory card from the camera and gave it to one of the other backpackers to load my images on his Mac. He said he saw half a dozen on the map on the .jpg files, but couldn't open them. When he gave me the card back and I put it in the camera, the card was empty! I had more than 100 photos on this card when I handed to him. Now I have nothing. Any ideas on what happened to all the files and what I can do to recover all the images?
There are several threads on this topicalready & many lists some software free links interesting to try BUT here is the link to a very good program that you can test drive to see if the images are there & recoverable before you pay for it. IF she finds them you know at least they exist & that you have the choice between either pay for licensed software or try the free stuff & see if it works for you.
http://www.LC-tech.com/PC/SanDisk-RescuePRO-and-RescuePro-Deluxe/
-
images dialog box is empty when you insert the memory card
This is after you have inserted a card high capacity in the player, which hung the memory slot. Now just insert a regular memory card, the dialog box appears, but there is nothing in it.
Sorry if the info seems confused but maybe the
answer is here somewhere.FWIW... There used a similar problem with a Sony memory
Stick... the solution is to insert the stick into the drive and
Restart the computer... somehow this would reset the
stick. I don't know if it will work for you.You may also check your AutoPlay settings...
If you insert the card and go to... Start / my computer...
and right-click on the drive letter for the location of in the map is...
choose... Properties / AutoPlay tab...Choose... Mixed content...
Tick... Select an action to perform
On the left, click on the default button / apply / OK.Give it a try...
It is possible that your media player is not compatible
with the SDHC technology. The best is maybe to buy
an external drive that is compatible SDHC or download
Unit photo using a USB cable.Regarding the card... have regular SD, you tried to manually
Download the pictures?If you connect the device to your PC via a USB cable, turn
on the camera... then go to... Start / my computer... it may be
listed as a drive letter...If_yes_right click on the drive letter and select... Explorer or
Open... This should display the directory of the memory card.
You can copy and paste or drag and drop the files from there to a
folder on your hard drive.(The same steps work if you have a media player...
When you go to... Start / computer... the media slots
Drive should be listed under... "Removable disk" with a drive
letter.)Finally... the AutoPlay Repair Wizard can be worth a try:
Microsoft Autoplay Repair Wizard
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad -
Error message - the memory card cannot be read during the closing of Quickbooks
I get this when closing QuickBooks (instruction at 0x56461f49 reference to 0x02cd4360 memory. The memory card might not read).
Hello
The question you have posted is related to Quick books, I suggest you to send your request in the forums of Intuit for better support. Click on the link below.
http://support.QuickBooks.Intuit.com/support/articles/SLN40784
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Maybe you are looking for
-
Mix together the production as a project or song?
I recorded a live production while logic PROX. Can I mix all the production together in a project or a song? The only thing to consider is that he can come back in synchronization with the video of the production.
-
newly installed firefox 5 on iMac 15 '' Power PC G4 OS x 10.4.11
When you try to start the application, gives message "application cannot be launched-10661.
-
The upgrade of memory in my satellite L100-186
I had my L100-186 satellite for over a year and have decided to upgrade the memory. I bought 2x1GB sticks and put them with no problem. Unfortunately it is not now start up. I returned two sticks, assuming that 1 was defective, but having received ne
-
Removed Norton, now I can't get online!
So my question is exactly as the title says. I removed Norton and I can always connect to the internet (small icon at the bottom right shows two computers and a globe), but now none of my internet browsers work! I can always download music off of lim
-
Wireless HP Officejet 6500 has + impossible to print from computer wired ethernet