updated same guard installation

Similar Questions

• Updates Windows guard installation of updates 1 to 3 (subj was MSN security...)

  {MSN Security Essentials}- {Moderator note: do not know what it is, assuming it is updated security Windows}

  .. Guard installation updated at each stop.

  Hi Andy Dandy.

  ·         What operating system is installed on your computer?

  ·         What happens after that updates are beginning to install in the computer? Are they installed successfully over and over again, or is the computer stuck on the screen "install updates"?

  You can run the Microsoft Fixit next article and check.

   

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Let us know the results.

• Update Windows guard installation same updates KB2604092 and KB2656369

  Windows Update keeps offering to install updates of security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092 and KB2656369 respectively) I made several attempts to install and also ran Fixit, but on reboot, the update screen appears again. The same solutions offered for similar updates but other NET framework 2.0 would work in these cases?

  Hello

  1. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/910339

  For issues related to Windows Server 2003, I suggest you to ask your question in the below mentioned link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Updated same guard resettlement (KB983583)

  No worries. Some Net Framework has been corrupted. I lived the same problem on my XP3. Add/Remove showed updated installed but MBSA wanted me to install & so was the auto update by downloading it again & again. Installs repeated does not solve the problem.

  Finally, uninstalled all net frameworks, cleaned up the C drive & rebooted. Reinstall all net frames in sequence & Ran MBSA 2.2. He advises to install some updates, installed their & the problem is over. Everything is back to NORMAL. No warning was updated

  To resolve this problem, please follow the steps mentioned in my blog: http://blogs.msdn.com/b/smondal/archive/2010/08/19/kb983583-is-re-offered-by-windows-update.aspx

  Or just see http://support.microsoft.com/kb/2262911 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update KB931125 guard installation root certificate. __

  I installed this update, but it keeps wanting to be installed again & again & again...

  Hello William,.

  you have a WSUS server on your network?

  In my case, there was an identified need and installable old obsolete root certificate update in my WSUS Config.
  When I disable this old "Update" ist, the latest being (from September), installed without a problem on my machines.

  Kind regards
  GoopherNo1

• Update Windows guard installation KB2633171 repeatedly

  I installed KB2633171 and control panel showing this as an installed update, but windows update keeps wanting to install over and over again.

  I reinstalled but the problem persists.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

  or

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Update KB2802618 guard installation, prevents me to 8.1

  Honestly, I don't know what to do. Whenever I try to upgrade to Windows 8.1, it tells me that I still have windows updates in the meantime. If I update KB2802618, and he says it has installed successfully, but when I click search for updates again, it says that I still have to update KB2802618. What gives?

  Hi Rampartt,

  Discounting is the best solution to solve the problem.

  How to refresh, reset or restore your PC.

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: Apps you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

• HP Software Update 2.8 guard installation on OS x Lion

  I have a HP Photosmart C4795 printer and the OS X Lion. In software update, the version of the hp 2.8 guard software update appears and installation. I tried uninstallling all HP related and reinstall it, but it does not solve it. Does anyone know how to solve this? Thank you

  Hey, Peter, lets try to uninstall the software by doing this:

  1. go in Applications/Hewlett Packard / click on uninstall HP and click on continue

  2. Select your device in the left pane
  3. hold the keys Ctrl, Opt and Cmd and click on uninstall
  4. There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  5. click on continue and let it finish
  
  Now run a software update. This is possible by clicking on the Apple in the upper left corner of the screen, then clicking on software updates.

  Then, we will reset the printing system:
  
  Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Also, make sure that you have installed this critical firmware update (its not relevant to your problem, but it is an important update): Update critical to prevent and recover from a front panel the HP Logo does not

  Let me know if it helps

  -Sean

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• Windows Update stops download of updates and install updates same as if they were never installed

  Windows Update stops download of updates and install updates same as if they were never installed

  Hi Skimbrell,

  Welcome to the Microsoft Answers Community Forum site!

  To resolve this problem, determine if the update has been installed. Then, use one of the methods in the section "Troubleshooting the problem.

  Determine whether the update has been installed

  To determine if the update has been installed, use one of the following methods.

  Method 1: Examine the history of installation
  To view the history of installation, follow these steps:
  1. click on Start, point to all programs, and then click Windows Update or Microsoft Update.
  2. on the Web site, click view update history.
  3. Locate the most recent entry for the specific update.
  4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  For more troubleshooting information, visit the below mentioned link:
  http://support.Microsoft.com/kb/910339/

  Method 2: Reset Windows Update components.
  In order to reset Windows update, visit the following link:
  http://support.Microsoft.com/kb/971058

  I hope the above helps solve your problem!

  Thank you best regards &,.
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Ko 2416473 guard installation time and time again

  Ko 2416473 guard installation time and time again. Windows Update keeps wanting to install agaiin and once again.  Already sucesfully installed more than 10 times in the installed updates.

  Vista home premiun

  Hi gymgorilla,

  Adding to the suggestion of JoseIbarra, you can follow this link and check if the problem persists.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update error 80070490 installation KB2679255

  Original title: we have all seen big problem istelling updates

  SEMM to me like windows no longer like and want us to buy new computers I read how manny people are havin the same problem and they don't suprerb thereon .i have a month with the error code 0 x 80040154 error 80070490 and the Dungeon send me updated same time and many KB2679255 can I get the assistance of a person really apreciate thanks guys...

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/cant-down-load-any-updates/b2a0ce2b-6b00-4214-95D5-6499a92d5b2e

  Cannot down load the updates

  Can not load down the updates, computer message read, Windows update data locations have changed... Please can anyone help with this issue...

  Hello

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the steps do not help then I suggest you to go through the steps mentioned below and check.

  Method 2:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  Important: make sure to save all your date before performing the repair facility.

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Windows Vista business is update, download and installation; even when the update is set to manual.

  I put the manual update manually. But despite this it keeps update, download and installation. Sometimes I turn off a few updates and suddenly, after a few hours, these unwanted updates begin to update! This is a joke, very annoying and the invasion of privacy!

  Could be group policy... .getting applied on your system... Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."