Updated satellite A20-S103 - CPU and RAM
I have toshiba satellite a20-s103 and I want to spend the cpu and ram.
I need more to upgrade the processor that the RAM, the socket is socket p, please if you find any compatible cpu or ram from e - bay or if you find elsewhere, new cpu, or second hand in a good situation, please report it!
and please tell me if intel core 2 duo or quad is compatible
If you find the intel core 2 quad or compatible with that laptop duo, please report!
Thank you very much!!!
Guess what buddy.
Forget the CPU upgrade!
It is a very old notebook support old chipset.
I'm quite sure that the chipset would not support Intel Core CPU m.
In addition, the memory can be improved up to 1 GB of RAM (2 x 512 MB)
More is not possible.
In my opinion, if you need more performance, buy a laptop (maybe good work 2nd unit) supporting the newer parts.
Tags: Toshiba
Similar Questions
-
problems with wireless after the motherboard, cpu and ram upgrade adapters
As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.
Hello
When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.
-
I have a problem with the BIOS update. Satellite A20-S103
She asks "Plug adapter AC." but II use my laptop with power supply only. And I have not adapter how can I install and upgrade my wood someone has idea?
Model satellite A20-S103.
I have 1.10 BIOS already I need 1.40
[Edited by: admin]
Hello
as you wrote everything should work!
The drums plugged in when you did the update to the BIOS?
Are you using the original power supply?
Do you use the Toshiba Power Saver? If so, set it to default!
Rudi Bye
-
Upgrade of RAM on my Satellite A20-S103
I can't tell what type of bars of memory I can use upgade my computer too... Everyone?
Hello
I think this link to the module memory for Satellite A20-S103 site should help you get answers to all your questions ;)
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7431&ft=m&St=3As you can see you can improve this laptop to max 1 GB of memory and you use PC2100 200 pin SODIMM (266 MHz) DDR modules.
I hope that you are satisfied ;)
See you soon
-
Hello
I bought a Z580 and would like to know if it is possible to upgrade my CPU and RAM.
really would appreciate help on this.
Thank you
It is of course possible to upgrade, if you upgrade your CPU it will certainly violate your warranty, but no doubt your memory can be changed without affecting, if you want to keep the original of the ram problems.
-
BIOS flash for Satellite A20-S103 necessary
Hello
I need a flash BIOS for laptop Toshiba Satellite A20-S103. I have already downloaded on the download site.
But this one I can't use because I need windows must be installed. And that's the problem.
I can't install windows because the BIOS is not fully ACPI-compatible.
The version of the BIOS on the laptop is V1.10.Update I need a version of dos to Flash the bios.
Is it possible to get an update of the bios that is written for dos?Thank you very much
Jean
> I need a flash BIOS for laptop Toshiba Satellite A20-S103. I have already downloaded on the download site. But this one I can't use because I need windows must be installed.
You will get no other update BIOS (traditional BIOS). Only the victory of BIOS-based are available on the Toshiba page!
In addition, you should be able to install windows even the BIOS is not fully ACPI-compatible.
What Windows you are trying to install?
-
Satellite A20-S103: can't burn CDs
I use satellite A20-S103.
my laptop won't burn CD more!
This laptop uses a combo CDRw-DVD-ROM
It reads, but he's not burn CDs?
I looked in the tools and utilities cdrom. I saw a driver called DVDRAM. also I searched toshiba.com drivers latest. She also wrote driver DVDRAM here.What is the true driver?
What can I do to fix this?Hello
As far as I know, DVD player is automatically recognized by the operating system and you n t need to install any driver. Driver DVD-RAM is something else and it is not only the driver but the little tool too and must be installed if the unit has DVD - RAM drive.
If you can't burn CD the only thing you can do is to do some tests.
Try to remove the drive from Device Manager, and then restart the device. The reader will be recognized and installed automatically
Check if you have any success with the media from different manufacturers
Try to clean the lensIf this does not help, I guess that your drive should be replaced.
Good luck!
-
Need info on GPU on Satellite A20-S103
Hello
I have a Toshiba Satellite A20-S103 and I'm looking for a graphics card. I don't know what is the brand of card, Board is Intel, independent, I don't know, please tell me what is the card.
Thank you
Message was edited: assignment has been translated
Hey this is cool that you always use this old piece of hardware. I m wondering really you want to fix, because it is not so easy to find parts for these old machines.
Autour Googling, I found the info this old machine has video Trident ALADDiN-P4 card.
I put t know if this info will help you, but the key is that you got the answer to your question. ;) -
Satellite A20-S103: LAN cable disconnected
Hello
I can not access my LAN or internet.
I use a Satellite A20-S103 with a Realtek RTL8139/810 x Family Fast Ethernet NICWhen I connect the Lan cable to the LAN port, the message "LAN Cable" disconnected.
The same message is displayed using connectivity doctor ConfigFree.I have changed several cables, used cables that worked on other computers and the message still there and no access to the router/modem.
Near the LAN port LEDs are not lightning (or orange or green, no)
I already read messages here in the forum (and other forums) and I can't get the ethernet card works.
Do you think the problem is with the card or the operating system.
Can you help me?
Sorry for my EnglishFirst, check to see if the network card has been recognized in the Device Manager.
Under network adapters, you should see the LAN card.If there is a yellow exclamation point near network card then the driver has not been installed correctly or there is another serious error.
In the first case I recommend the withdrawal of the LAN card from the Device Manager and after new reboot, you should try to reinstall the driver downloaded from the Toshiba page!
In addition, you must set TCP/IP parameters automatically because the router assigns the IP address automatically.
Please check and report the results
Good luck
-
Lost my recovery of my Satellite A20-S103 disk
Hi all! I lost my recovery of my Satellite A20-S103 disk. Anyone could copy it for me? Or, there is somewhere I can get it? Thank you! Be well!
> Could someone copy it for me?
Toshiba Forum is not an emporium of recovery disks!
I guess that a recovery could be ordered from the ASP.If this laptop is too old then it will not be possible to get the collection of the ASP.
In this case, you need to install the XP from your own disc, and then the pilots could be downloaded from the Toshiba page. -
Satellite a20 s103 wifi problem
Hello!
I inserted a card MSI mp54g2 mini pci wifi in my computer Toshiba Satellite a20 s103 and it does not work properly. The signal level is very low, although I tested it in the same room where was my AP (dlink dl-624 +). I found that there are 2 cables inside the computer (Brown and white) and two locations on the wifi card (in the hand). I don't know how I connect them, yet I tried all possible combinations and none of them does not change the signal level. Also, I found that even though the antena is not connected, the signal level is the same.
Can someone help me with this one? !!
Please help me!
THX :)HI TEC
Connect cable o white HANDS and black to THE and try again.
-
Honestly, I don't know what it is... But after five minutes of my PC is on this program opens in the Manager of tasks called Kvaleyo. It keeps only opening of more bodies Besides this one. It gets to the point where it uses 100% of my CPU and RAM... I tried to remove the location... I have to close all instances that keep reopening anyway... I have so VERY quickly shut them down and hope THAT I got them all and delete... But the problem is... Every time I restart the PC files come back and the problem returns... It's a huge pain because I can't do anything at all.
In any case... Any help would be appreciated.
Hello
See if this helps you:
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
'Advanced options boot (including safe mode).
_______________________________________
And also scan with the free version of SUPERAntiSpyware
http://www.SUPERAntiSpyware.com/download.html
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.
SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.
______________________________________
THS is a very good program to scan your system to remove adware, etc.:
http://www.bleepingcomputer.com/download/adwcleaner/
AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer. Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.
_____________________________________
And just to be sure, nothing is lurking in the background:
'TDSSKiller Rootkit Removal Utility download for free'
http://USA.Kaspersky.com/downloads/TDSSKiller
See you soon
-
Change of motherboard, cpu and ram by using the version of upgrade of windows 7
I plan on upgrading my motherboard, cpu and ram. I am using windows 7 Home premium that I have updated from xp using a retail upgrade disc that I bought from a company of national computer supplies. Should I have any problems activating this the wrench that came with the drive. I have read several posts on this but can't seem to find a definitive answer. Help, please!
Well, Windows XP and Windows 7 are versions of upgrade as you claim, that means XP used a qualifying version of Windows that is pre-installed with the system used the upgrade of the command.
This means, Windows XP and Windows 7 are both related to this version of Windows that came with the system. Because the copy of the original Windows supplied with the system would have been an OEM license, which means, Windows 7 and XP have more rights to transfer if you change the motherboard.
You can always try a clean install with upgrade.
How to do a clean install with upgrade disc:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?
Hello
PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:
http://eSupport.Sony.com/us/p/support-info.pl?info_id=264
The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:
http://eSupport.Sony.com/us/p/select-System.pl?Director=docs
Try the procedure described on the following link to resolve problems when the computer is running slowly:
https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709
If my post answered your question, please mark it as an "accepted Solution".
-
SQL Server 2008 R2 CPU and RAM requirement for HFM/FDM
Summary of the problem
---------------------------------------------------
Requirement of SQL Server 2008 R2 for HFM/FDM
Description of the problem
---------------------------------------------------
We install a new EPM 11.1.2.3 - HFM and FDM on one server that hosts the services of the Foundation and FR. Our question is on the CPU and Ram needed on the SQL Server. We have 2 users with 4 GB of data, but we have to get the good performance of SQL server.
Please provide me with a white paper link or just tell me what it takes.
Thanks in advance.
4 CPUS and 16 GB of RAM should be more than enough to support your needs
Maybe you are looking for
-
I have Snow Leopard (the minimum OS) installed on a USB external drive. My drive hard main is a an iMac 21.5 late model 2009 Maverick (OS 10.9.5) running. Then on an external USB I Yosemite 10.10.5. When I restart of Snow Leopard in Yosemite for so
-
Satellite Pro L300 - cannot install software for USB 3.0 Expresscard
I try to install AKE USB 3.0 expresscard to a Toshiba L300 Pro running Windows 7. The laptop recognises the ExpressCard but the software does not correctly install if the unit will not operate. Tried the drivers NEC & fresco provided with the unit an
-
I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...
-
Where can I get 4 8 GB simms to upgrade my memory low 16 GB
I can't find Ram for my 13 pro on the Apple? I can't find my end of 2013) End price of mac. Thank you Glenn *. .com
-
My mail icon does not open to see the mail; I see that I have eleven messages waiting. The software is up-to-date by using the Version Os X El Capitan 10.11.2