Updated the models encourage not updated on sync

After talking with an assortment of people Adobe, I was advised to take my question on the forums to see if someone else might have a workflow that will accomplish what I am trying to acquire: a model master centralized control, out of which subsites can base their models. (I apologize ahead if my entry takes an arrogant tone.) For brevity, I'm being pretty straightforward - I'm not really a Dreamweaver-enemy.)

Here's the full version:
We are a large company, and the public Web site is all custom code. However, we have many departments, and many of them have their own public information sites. We use Dreamweaver on a departmental level for the public web site of each service, managed by a person designated by him in this Department. The idea is to have a "company" basic model that establishes the catch-all provision that each of my Department webmasters can use as the basis to create a template for the site of their Ministry. Theoretically, they don't would be concerned with the details for their Department and would inherit a widespread company container from the main template. (Currently, it's the Wild West, and each Department is responsible for their own model - you can imagine the wild variations in appearance through our presence on the web.)

When I initially created each service to have a web site, I manually create their models / directory on the server and put the main template in this directory (in fact, each Department has just a symbolic link to master, but I digress). The permissions are such that they cannot edit this file on the server. (They obviously can change it locally, but it can never be replaced on the server - if I could lock it so that they could not accidentally change it locally, I would do it; but I don't know how to do such a thing without having a flag 'read-only' on the model or something Dreamweaver.) Yet once again, I digress.)

In any case, what I want to do is the following: in the event that the main template on the server changes (which would result in the file of Templates/Master_Template.dwt for each service I placed there immediately appearing to have been changed), I might have users synchronize their site (that overused realization of Dreamweaver that changed the model), pull down the model and be invited to update their template Department (because it is based on the model of 'master' now-changed), which would be cascaded to update pages based on the model of their Department. Theoretically, this should work, because if you actually open the local copy of the Master_Template.dwt, change and save it, the update process works exactly as it should.
In the real world, however, the "...". and update their Department model... "part is where the process stops, because when a template file is updated via synchronization rather than change manually, either this opportunity to update all dependent resources (potentially outdated) is presented.

It was suggested to use Contribute for the Department, but Contribute sites with no knowledge of the elements of library or the modification of the model, it should be I have centrally manage * all * models instead of just the main template - and that's exactly what I'm trying to escape to do by delegating peacekeeping each ministerial department site.

The only work around I can think of is this: in the case of an update of the master model, have each user synchronize their site, pull down the new master, open it, make a few simple changes (a space or similar), delete it (so the model can be saved) and then save the now-modified-but-not-actually-changed local main template file, which would engage the update that I'm looking.

Such a process might generously describe "subject to error."

I'm a little surprised that this kind of thing has not been processed (that I can find) front. If it was, I'd like a link. The solution is such a good fit that I'm reluctant to give up Dreamweaver and go with something else - looks like a lapse such small feature - but he tanks completely the overall strategy.

Frankly, I think it is a bug. I don't think it matters how or by whom the changes made to the model - if Dreamweaver ever notice that the model is different, he should realize that any resource based on this template could potentially be stale and offer the possibility to update. Or, at the very least, there should be a way to "Refresh" the site - have Dreamweaver compare the State of each resource to their ancestor model (s) to check the consistency and offer the opportunity to upgrade at that point to the possible contradictions. Something else that "synchronize your site, open the main template, add a space, delete, save, updates start" would be a better solution to workaround.

I can't wait to hear suggestions, however.

Quote:
Posted by: newsgroup user
I'm not aware anyway make it work the way you are the Template of DW engine
describing. The Templates folder and its files of constitutive models MUST be
in the root of the site.
However, I confess, I have not read your post in full to extract all the
the granularity that you offered. If I missed something, please let me
don't know.

No, has nothing to do with what I'm trying to do.
However, I received a correction to part of my message of an engineer from Adobe:

Quote:
Hi Travis,
I read your post on the forum and agree it would be nice to have this kind of functionality in Dreamweaver, but because this isn't the standard use case (a site other subsites of conduct), you have to pass through a hoop more in Dreamweaver, rather than simply synchronize.
I don't think you have to do the steps, opening the modified model, bringing a change, delete, and save. On the other hand, it please try the menu item:

Modify > templates > update Pages.

This should update all pages according to the current state of the Templates folder. Thus, instead of your steps: "synchronize your site, open the main template, add a space, delete, save, launch updates. Please try:
1. synchronize Site
2. modify > templates > update Pages...

I totally forgot this menu item - it provide a usable workaround.

Tags: Dreamweaver

Similar Questions

  • I recently bought 13 elements for Mac OS and can not download N - OS and can not download files NEF RAW taken on my Nikon d5500 has been added. The model is not among those supported by the elements, but the D5300 is, which is almost identical. Is there a

    I recently bought 13 elements for Mac OS and can not download N - OS and can not download files NEF RAW taken on my Nikon d5500 has been added. The model is not among those supported by the elements, but the D5300 is, which is almost identical. Is there a quick fix?

    What is N - OS?

    For the problem of camera raw, every new device has its own raw format, and ACR must be updated to include the latter. Happened yet for the d5500 has been added, so you'll just have to use the Nikon software until Adobe gets the info and releases an updated version of ACR. It is not uncommon to be in your situation, if you buy a camera model that was only a month. You just wait a bit.

  • Dreamweaver 8.  Update of the model does not appear in other pages

    I created a template for my Web site. All pages in the Web site is used. Sometimes when I change the model and save, it queries on save the template and update the pages using the template. Sometimes he asks only to save the model. I just had to model and want the changes to be made in the related pages, but I can't ask him if I want to update the pages. What I am doing wrong? Also is there a way to force all pages that use a model to be rerfreshed from the model? (Changes in the model, I had attended a non editable section). Thank you

    That would certainly do. I would add that, as the means of 8? No - this is the case
    unlikely, I don't think I would! 8)

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.dreamweavermx-templates.com - template Triage!
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
    ==================

    "annpmul" wrote in message
    News:ea33q5$Go7$1@forums. Macromedia.com...
    > I found my problem. I was not using the correct model dwt file.

  • Change, detach the model could not allow a normal page save.

    After the early use of a template page, it came back to haunt me.

    I decided from the outset that the site has a few pages, do not use a template, then followed the following instructions:

    1. open the document based on a template that you want to detach.

    2. Select Edit > templates > detach the model.

    Library deleted, template updated and thought everything was fine. But, I now have page, on any change and save, come back as a model. I have watched every line of code and the research tools used and can find no template code.

    I know that this can potentially cause problems on the road and I'm looking for other solution (than to start over completely.) All pages validate and work on multiple platforms.

    Test site at: http://www.actionappliance.us

    Thank you...

    Sounds to me like there is a model that is nested within another model at some point in this process.   Basically, the index became damaged.

    I would like to make a new page.

    Nancy O.

  • New from the model does not take into account model

    After several years of successfully use a series of models, I met a strange problem. When I try to create a new file of one of these models, the new file is displayed, as well as all the source code, but not the coding model, such as <!-InstanceBeginEditable name = "head"--> etc etc.

    For example, the first lines of the model and the same first lines of this file, which is created from this template to look like this:

    Why did DW stripping on the template feature?

    When you create a new page of the child from a template, there is a checkbox at the
    bottom of the Panel called "update page when the template is changed". Is it
    checked?

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    ==================

    "newsbob" wrote in message
    News:g12dl6$DEU$1@forums. Macromedia.com...
    > After several years of successfully use a series of models, I ran
    > in
    > a strange problem. When I try to create a new file of one of those
    > models,.
    > the new file is displayed, as well as all the code source, but nothing of the
    > model
    > encoding, such as < !--="" instancebegineditable="" name="head" --=""> etc etc.
    >
    > For example, the first lines of the model and the first same
    > lines
    > the new file created from this template look like this:
    >
    > Why did DW stripping on the template feature?
    >
    > IT'S THE MODEL:
    >
    >
    >
    >
    >
    >The LLNL Public Affairs Office: press release
    >
    "> http://www.llnl.gov/favicon.ico" >
    >
    >
    >
    >
    >
    >
    >
    > =============================================================
    > THIS IS THE FILE CREATED BY SELECTING 'NEW' MODEL:
    >
    > > " http://www.w3.org/TR/html4/loose.dtd" >
    >
    >
    >
    >The LLNL Public Affairs Office: press release
    >
    "> http://www.llnl.gov/favicon.ico" >
    >
    >
    >
    >
    >
    >

  • Synchronize the database and the model does not not for some FK in 4.0.2

    It does not sync DB to the model or model DB:

    1 FK in model has the DEFERRABLE INITIALLY DEFERREED = YES but ACTIVE and YES = value

    2. in the base of the FK is NOVALIDATE DISABLED

    Sync shows no difference at all.

    Never mind! It's the same problem I had before. David said it was a known problem.

  • Tilde key used to turn the model does not work

    I recently got a new mac with cc Adobe installed.

    In general when I want to turn a boss, I simply press the tilde key and manipulate the model, but on this new computer, it does not work. Instead, the entire shape moves, and I'm unable to move the model. Y at - it a setting or something that might have to be adjusted?

    It drives me crazy that I can't understand it.

    Thank you in advance!

    You should find the forum for any product it is and post your questions there.

    Here is a link to a page that provides links to all of the Adobe forums...

    The Forum links page: https://forums.adobe.com/welcome

  • The model does not resemble the original page.

    Hello

    When I create a model, the model ends up looking like a very generic of the original version until I have save as an html file.  Images disappear and the menu bar is missing, but the words that make up the menu bar are stretched across the page.  The boxes, I've built for the content area also disappears so I can't make an editble region.  I know that this is not just because I just watched a video of a guy at adobe and when he creates a model the youtube model looks exactly the same as the page: :// http://www.youtube.com/watch?v=V5_-kaDZr6whttp.  Anyone has an idea why this happens?

    Thank you

    M

    File > new model Page.   Choose a template in your current site.

    SaveAs new file nom.html

    I think that what you do is save your template as a new file that does not work because the paths external CSS, scripts, and images are broken.

    Nancy O.

  • Use of the model, but not on all pages

    Hello - new user DW CS5.   I have a built site where I created my first page with banner, header, footer menu sidebar graphic using the DIVs.  There is a #content box (editable) where my variable text/graphics to send in.  I then turned this skeleton in a backup model and built the rest of the pages out of the model.  I can't believe how easy it was and it works.

    But how to establish a "selective model area.  What does this mean?  OK, I have a subsection (who are we) where we give a little bio and photo on the staff members each on their own sub-sub-page.  This DIV I need to define an area of model where I provide links to the other members of the staff member - < a href... >, but I don't want this box on every page of the site, just the subpages describing members of the staff.  Of course - I could copy and paste from one page to many but I know good design, you do not want to enter in repeat code this way because it's 'dirty' and difficult to follow in the future.  In my studies, I ran across this so I know to avoid.

    And so, because I have little training, I'll ask if anyone has a couple of pointers to allow this kind of behavior - have a text/chart area (model?) that may apply to the selective pages I want?

    Thank you.

    Hoib

    Please do!

  • Define the model is not enabled - why?

    I followed the simple instructions in the help to the letter system. I make a selection by using the Rectangle tool, but the menu as a reason in the Edit menu item is not selected. What should I do to define a model? Why is it something simple so difficult?

    -Steve

    .. then why not invert the selection remove everything which is not the dashed border you see?

    I'm not saying this isn't!

    What I propose is that some of the pixels IN the selection of ants works show you might have a transparency in some pixels which is originally as a reason to not be available.

    Can you put this model on a surface with light and dark values (NOT the transparency checkerboard you) and re-post?

    Or better yet, Cmd + click on the layer of the problem and save this selection. Then after its alpha channel.

  • synchronize data dictionary with the model does not generate the DDL

    Hello

    I followed the instruction from the link below

    Re-engineering of your database by using the Data Modeler 3.1

    Here's what I did.

    1. the tables imported using import-> MS SQL 2012 data dictionary (used jDTS 1.3.1)

    2. Add new column to one of the imported tables of the Data Modeler

    3. click on synchronize data dictionary button

    4. compare the contextual model poster! indicating there is gap, but the DOF Preview button is disabled.

    Would you advise me what I got wrong?

    Best,

    Yong

    MODIFY the script is only supported for Oracle databases.

  • Regarding the model updates, what means this error message 'not updated, point not found' mean?

    This is the second time I've posted this question so I hope someone will answer. In recent weeks, I found that I could apply is no longer a model in a group operation (returns the error above). If I change the model and save it shows all files associated with the update but does not actually update them and again returns the error 'not updated, point not found'. As a test, I created a copy of a .html special and enforced the associated model file. When I apply a change of model, it does correctly update the newly created file, but not the others. I also made a comparison of mechanical (by using windiff.exe) between the original file and duplicate file, and there is NO difference in both .html files. I also deleted and then recreated my cards site several times.

    As an aside, elements of library successfully.

    I use Dreamweaver CS6 on Windows 7.

    OK, here's an update. The three sites Web I was working on is gone live this weekend. As part of this activity, I created a new source folder in My Documents where I loaded the production version of the code. I created new DW sites for each and have begun changes in final production code which resulted in a number of model and the library updates the many pages on the sites. If you remember, the updated library mass worked fine but the update of the model is not. Well, I'm not sure what has changed other than the location of the source folder, but all works normally now. Go figure. I'm not complaining but just confused because I had been through this drill before.

    I guess there is no need of the cavalry. Thanks again for your help.

    Al

  • Model does not update Pages

    Help us! Our model we have created with several editable regions will not update other pages when we make a change to the model. We bought books, called Macromedia, called local experts and we're back to the drawing board. Why will update our model? It has several tables in it, and we can apply our model of new pages we create them, but if we make a change in an editable region on the model and update the pages, pages never receive changes. If you have any ideas, please let us know. We have more than 100 pages to our intranet site and we cannot begin to replace each page individually. We must do this work. Help please!

    > but if we make a change in a
    > editable region on the model

    But it is always the case. Changes to the editable regions in the model
    do not propagate to child pages. If they did then you ever could
    unique content on any page.

    > We bought books,.
    > called Macromedia, called local experts and we are to the drawing
    > Board of Directors.

    Really? This is the way it has always been and always will be.

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.dreamweavermx-templates.com - template Triage!
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
    ==================

    "wilddandylion99" wrote in message
    News:e3ib26$s3u$1@forums. Macromedia.com...
    > Help us! Our model we have created with several editable regions will not be
    > update
    > other pages when we make a change to the model. We bought
    > books,.
    > called Macromedia, called local experts and we are to the drawing
    > Board of Directors.
    > Why will update our model? It has several tables in it, and we can
    > apply
    > our model of new pages as we create them, but if we make a change in a
    > editable region on the template and update the pages, pages ever
    > receive the
    > changes. If you have any ideas, please let us know. We have over 100 pages
    > to
    > our intranet site and we cannot begin to replace each page
    > individually. We must do this work. Help please!
    >

  • View 5.0 unable to communicate 5.0 U1a vCenter - "the service does not work properly.

    This view instance has 4 brokers of the connection running on Windows Server 2008 R2:

    The environment has been upgraded 2 years of view 4.6 see 5.0.  When view 4.6 was used there were 2 additional 32-bit Windows connection brokers in the mix as well, but they were all disabled both in the from view 5.0 5.0 update requires Windows 64-bit. They have been disabled but NOT completely removed from the view.  As part of my troubleshooting this problem, I decided to delete these two brokers disabled connection of the system since it seemed as if they were causing errors in synchronization between brokers.

    Here are my steps, I took this day and in this order as far as I remember the:

    1.) restart vCenterServer services, including the management of VMware webservices

    2.) full restart the server vCenter

    3) Started digging through logs of connection broker to see if something stood in there - found that there was a warning message not being able to connect to https://< vcenterserver >: 443/sdk.  Found a number of articles and posts on the service account no longer works.  Verify that the service account was not locked and that he worked in logging on to the server vCenter via RDP successfully.

    4.) published at the entrance of the vCenter Server View Manager and re-entered the account password and ensure he was still able to connect successfully and that it can.

    5.) other searches on the site of VMware KB and communities find an article indicating that the time on connection brokers can be out of sync.  Double and connected on each of the brokers control the weather was everything in harmony and it is.

    6.) checked to make sure that all LDAP databases are synchronization correctly - this is where I decided to remove former brokers not used environmental and force a replication successful each of the neighbors brokers by using the repadmin utility.

    7.) after forcing replication, I went in a restarted the Mangment vCenter web services again.  -At this point, the connection between the broker and vCenter server came back, but the pool that has a removal pending task has not continued and seemed stuck.

    8.) about 5 to 10 minutes the communication error with the vCenter exploded back up again.

    Also of note, this environment is connected to a different vCenter and working well with no error or stuck tasks.

    Someone at - he of the additional things I should try?

    Thank you

    Jason D.

    Has worked with VMware Support on this and it appeared that the brokers were not quite in sync, even after forced synchronization, I ran previously.  Finish restarting brokers (a both of course) to make things synchronized back to the top.

  • Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

    QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

    I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

    Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

    I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

    I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

    Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

    But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

    QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

    Thank you hope that your next print job loose its staples.

    Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

    Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

    In response to your questions:

    1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
    2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
    3. Continue the first paragraph.

Maybe you are looking for