Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

Similar Questions

• When the new version is right now I can not connect to my email. I tried to reset came by e-mail. Help!

  I can't get into my e-mail account with any user name or password. I asked to reset and no email came through. It has been a few times. This is my work email.
  Chris

  https://support.Mozilla.org/en-us/KB/cannot-receive-messages

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Updated Windows and now I can not run other programs on my PC

  Updated Windows and now I can not run other programs on my PC!  What can I do?

  Hello

  ·          Update you installed before the problem?

  ·          Do you have a code error message when you try to run any program?

  If the issue took place recently, you can perform a system restore that will repair return the computer to the point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A110 - update the BIOS for Windows 7?

  Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
  My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

  My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

  Hello

  > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
  You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
  So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

  If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

  Welcome them

• Is it possible to get the files for windows vista, so I can reinstall my system?

  Hello

  Im a user of linux on one machine HP Pavilion dv5-1095eo leisure. IM tired to restart my machine to run a windows OS, so is possible for me to get the files for windows vista. I got the windows key attached under the computer and I don't have any windows CD when I brought the machine.

  Hello:

  You can do your own installation disc Vista too if you wish.

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

  * O.T. > encrypted files

  So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

  After attempting to decrypt the files, I'm promped with this message:

  Attribute application error

  An error occurred applying attributes to the file:

  driveletter\filename

  Access is denied. \

  I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

  Hello

  I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

  • What program did you use to encrypt the files?

  From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

  Cannot decrypt previously encrypted files

  I'm unable to decrypt files encrypted after reformatting the hard drive.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I did a system restore and now I can not connect. Error code oxc004e002.

  I ran the restoration of the system and now unable to connect. Error code oxc004e002 AAn arrives. McAfee also keeps poping up saying that I am not protected

  Hi Rita Morgan,.

  1. on what application you can not connect?

  2. When you mention "sign in" mean, you are not able to boot to the desktop?

  3. have you updated your McAfee security software?

  Make sure that it is not expired and updated your McAfee software up-to-date.

  Follow the steps below and check, if it helps.

  Step 1:

  Start your computer in safe mode with network and check if that helps to connect.

  Step 2:

  This problem can also be caused by a malware, I you have to perform a full scan in safe mode with network in order to remove the malicious software and since then, your McAfee does not protect your machine, I would have you to run a scan using the link below.

  http://OneCare.live.com/site/en-us/default.htm

  In addition, check out the link below and check if it is related to your issue.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/b7e31d29-801B-4AFA-932e-46572344476a

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Help? Adobe Acrobat Standard 11 - just bought for windows 7, now I can't open pdf files or tie?

  Help!

  I just bought the last Adobe Acrobat XI Standard.

  I put in the serial key number but my computer tells me that calling a product is not found on my computer so I can not use the adobe product. So now I can't open any file or attach PDFs to emails without this message coming. I uninstalled the "Adobe Acrobat XI Standard twice! with no luck.

  I need it sorted as soon as possible because I'm working! Any suggestions?

  DotBellaParis if you are prompted for a product calling it so it would seem that you purchased an upgrade to Acrobat Standard XI.  You should have the option to enter the serial number of your previous purchase of Acrobat.  You can find information on how to locate your previous issues of the series at http://forums.adobe.com/message/3987968#3987968?promoid=KBHJW.

  If you did not intend to buy an upgrade, then I recommend to submit a return request.  You can find more information on the presentation of a return to the return, cancel, or Exchange an Adobe order - http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html.  Once you have returned the upgrade you can then buy the full version which will not ask you for an eligible product or a serial number.

• [RESOLVED by itself] Firefox Sync: unable to connect to the server for 12 hours now

  New installation of Windows 7 64 bit
  New installation of Firefox 28

  Is my sync configuration, enter the user, pass & recovery key.
  It hangs on the audit for more than five minutes.

  Then displays error: unable to connect to the server
  See the screenshots: http://i.gyazo.com/0d19d680eae937fa27ace5df59caaa5d.png

  This happened during the last 12 hours.

  The State of the system (https://services.mozilla.com/status) Says:
  "The Firefox Sync service is running normally.
  There is no known issues at this time. '

  I tried to disable the firewall and I use MS Security Essentials.

  Please advise?
  Thank you.

  This issue is resolved itself today.

• HP Pavilion 17-e049wm: update the BIOS for windows 10

  Just updated for Windows 10.

  Why am I having trouble finding a bios update.

  Iced42

  There is no need to be rude!

  There is no driver HP Win10 for your PC as well, when you did the update that you were MS drivers - that offer only basic features.

  You do not Win10 BIOS update because HP does not certify your PC for Win10 and, therefore, has not produced any BIOS Win10 updated.

  HP has released no timetable for when, or if, they perform BIOS updates for older machines.

• I have to log on to a web site under 2 different companies, but I clicked on 'remember login' for one and now I can not simply to the start page to open a session to the other company - he continues to go to the page for the first.

  I have two companies for which I connect to an Internet site for the data. I clicked "remember me" for the first company and now I can't get to the home page to open a session for the 2nd, he just guard logging in for the first.

  You can also try one of these:
  CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
  CookieSwap: https://addons.mozilla.org/firefox/addon/3255
  Multifox: http://br.mozdev.org/multifox/

• Did not get the product for Media Center-no code can not process the order

  I asked the promotional offer for Windows 8 Media center, but never received the code.  He said that it takes 72 hours to receive, but it has been good (probably about 2 weeks).  I checked all my email, including spam, and there is no email with the code.  I tried 3 e-mail addresses and now all I get is "cannot process order.

  Hi Sukeyrh,

  Sorry to hear that you have a problem with that.

  You may reach the Service the customer to know that you run in. You can find the telephone numbers of the Service the customer in your area below:

  United States: 1-800-Microsoft (642-7676)

  Canada: + 1 877 568 2495

  Comprehensive list of phone numbers can be found here.

  Keith