Updated to mountain lion and now, I have continual errors in PS!

Similar Questions

• I installed Mountain Lion and now does not open Illustrator CS6. I get a message - 1712. Help?

  I installed Mountain Lion and now does not open Illustrator CS6. I get a message - 1712. Help?

  I did an uninstall and re-install but since I bought the entire suite CS6 was complicated and long. But I got through it and Illustrator now opens and works. Thanks to everyone who wrote for help.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• lost my sound and now I have this error # 0X800A0ice

  My Windows Internet gave me the local problem.

  Then I lost my sound and now I have this error # 0X800A0ice.

  Need help now.

  Hello

  1. what operating system do you use?

  2. what version of internet explore do you use?

  3. What is the exact error message you received?

  4 did you change on your computer?

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• I've updated to Lightroom cc and now I have problems with permissions... How do I rectify this? I followed the instructions online, but I can't change the preferences folder permission to read and write.

  Help, please! I updated Lightroom CC through the creative cloud and now lightroom will not organize the citing on 3 files permissions issues. I tried to follow the instructions to manually fix the issue but I can't change my permissions on required files. IM using an iMac with OS El Capitan.

  Salvation without flinching,

  Did you apply permissions to all items included for these files to Adobe?

  Apply permissions to all items in a folder or disk

  1. Select a folder or disk, and then choose file > read

  2. click on the lock icon to unlock, then enter an administrator name and password.

  3. click on the pop-up menu Action , then choose "apply to the included items.

  and you also have to give all the permissions to the Adobe User Library folder (~ / library) as defined by miguana in the initial post.

  Reference article: 6.4 CC 2015.4/Lightroom Lightroom, Photoshop or bridge hangs or crashes at launch

  Kind regards

  Claes

• updated the macbook pro and now I have connection problems

  So we have a MacBook Pro (15-inch, mid-2012) and we have recently updated to the version OS X El Capitan 10.11.5, after update, we are unable to access our connection (it might load a little before to redirect us to the login page) except for the Witch of guest account has functioned well (except he says google.com security certificate was not active yet even though she was active) for about 15 days). We took it to the Apple store where we connect our moms charged very well account however, it took much longer than normal and once finished loading he wanted that we created a new connection and sign in apple ID (according to the guy in the store of the bulk was normal after update (, but at the time we did not know he had even been updated) when we had finished making the new account he had signed us the new account and not my moms. When we arrived at the new account did not show and just my sisters once that she had recorded in then signed in to the new account that we made in the shop. Now, we managed to find all the documents in the 'users' section but all applications are gone and the new account is not visible. When we went in the settings section and saw all the users that appears is the new account.

  If you go to the preferences system/users and groups, how many accounts do you see there? How many accounts is supposed to be there?

• Updated flash player again and now not his (mac)

  Just updated again Flash Player and now I have no sound.  I use flash player 15, on a mac running OS X 10.9.5 (13F34)

  Please can you help me?

  The bug is open to video team, but without the consistent steps to reproduce, it is unlikely that his will generate a fix in a timely.

  I did a little research more, and I found a number of people on the forums of Apple which indicate that this could be the result of some corrupt settings.  People who indicate success, especially on older versions of MacOS were all basically just trying variants make the unreadable parameter files.  They are returned to their default values should be cleaner.

  Try this:

  Go to control panel > Flash Player > advanced > browsing data and settings and press Delete All

  You can also remove the Safari browser cache (Safari > Preferences > privacy > Cookies and other data on the Web site > remove all data from the Web site).

  Then try to use YouTube

  If this does not work, try to remove the following folder:

  /Users//Library/Preferences/Macromedia/Flash Player

• I got the Beta version on my phone and now I HAV to change no update.

  I got the Beta version on my phone and now I HAV to change no update. Coz my phones says 10.0.1 and it is up to date. FYI, I deleted the profile end time. !

  < re-titled by host >

  Hello

  If it says 10.1 ios so it is like mine and up-to-date.

  See you soon

  Brian

• HP just update the bios on my computer and now I have no sound.

  I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help

  Hello:

  Go back to the BIOS and the BIOS to its default values and restart.  See if get you your audio files.

  Try reinstalling the audio driver, if it does not work.

  Try a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c01684768 & prodTypeId = 321957 & prodSeriesId = 3688868

  Last resort, back up your files and perform a recovery of the system back to the form of the plant.

  Paul

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• HP support forum updated my audio the restarted the pc and now I have no sound in my pc?

  support hp updated my pc (audio) and then restarted the pc and now I have no audio?

  Hello

  It is very good that the problem is solved for you.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• I bought anytime windows Pro and now I have no update update file and cannot download add-ins

  I bought anytime windows Pro and now I have no update file to use to reload my OS and you can't download XP, I have no ID and product with no files, I paid $90 for nothing (need copy paper)

  I'm tired of trying all the fixes.

  There is no way of contacting microsoft without having to pay a tax to support!

  Can I get credit towards a full copy of windows 7 pro

  What was the original version of Windows 7 you have before using the "upgrade" Anytime   Whenever the upgrade cannot normally upgrade to XP.  It simply allows the upgrade of Windows from a lower to a higher level:

  Home--> Home Premium---> Professional---> Ultimate.

• I've updated my CC today and now when I download pictures, they do not appear in mode LR library or develop? Does anyone else have this problem?

  I've updated my CC today and now when I download pictures, they do not appear in mode LR library or develop? Does anyone else have this problem?

  Hi thomasr,

  Please follow the link for troubleshooting below.

  Black display thumbnails in Lightroom CC 2015.2/6.2

  Let us know if it helps.

  Kind regards
  ~ Mohit

• I just ran updated today in DC and now I am not able to add text notes and my signature to a PDF document I have in the previous version... suggestions please.

  I just ran updated today in DC and now I am not able to add text notes and my signature to a PDF document I have in the previous version... suggestions please.

  The option to edit PDFS in tools has an associated cost, and this tool was already in my previous release... a way to revert to this version?

  Use Adobe Acrobat, Acrobat Reader.