updated Windows cannot currently check updates because the service is not running.

Similar Questions

• Windows Update cannot currently check the updates, because the service is not running. But it is!

  When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »

  Steps has been involved:

  1. I restarted and even restored to the point when the last update was installed.

  2. I verified that the service is running and checked that there are no errors in the the event log for this issue.

  Any ideas?

  PA bear,

  I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:

  1 Win 7 Home Premium installation

  2 64 - bit OS

  3 avast! Full version

  4. no other anti-virus/anti-spyware has never been installed

  5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.

  6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.

  Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.

• Cannot install windows update, error: Windows Update cannot currently check the updates, because the service is not running

  Original title: Impossible to update Windows 7 on Netbook

  I have a Samsung Netbook running Windows 7, but can not run Windows Update

  Each ime that I try to run the update, I get the following message.

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  Hello

   
  Follow the steps from the links below and check if the problem persists.
   
  Method 1: Run the Troubleshooting Utility from the link below and check if it helps.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Method 2: Run the FIXIT in the below mentioned link and check if it helps.
  How to get the latest version of the Windows Update Agent to help manage updates on a computer?
  http://support.Microsoft.com/kb/949104
   
  Hope this information helps.

• Updated Windows cannot currently check updates, because the service is not running. You may have to restart your computer

  Original title: Windows Update problem, help please

  Whenever I go to windows update, it says "Windows update cannot currently check updates, because the service is not running. You may have to restart your computer"I restarted my computer, but the same message back steadily for several weeks. How can I fix?

  Thank you

  Hi Lydia,.

  There are three services that are important to check, download and install the updates. These services are Background Intelligent of cryptographic services service and the Windows update Service. These should be in the started state and currently running on the computer so that the computer connects to Windows Update Server, check the update that corresponds to the computer, and then download them accordingly.

  Follow the steps in http://support.microsoft.com/kb/2730071 and make sure that these services are started on the computer. If they are, then if he please stop and then restart the services. Restart the computer once that change in services.

  It will be useful.

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

  Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

  I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

  I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

  Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

  I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

  Thank you!

  Hello

  1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

  2 did you do changes on the computer before the show?

  Method 1: Run the update utility

  See the following site:

  Problems with installing updates

  http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

  Method 2: Start services

  Make sure that the following services are started:

  a. Windows Update

  b. Background Intelligent Transfer Service

  c. Cryptographic Services

  To do:

  a. click Start, type services.mscwithout the quotes and press enter.
  b. double-click the service and under Service status click Start, if it is not started.

  Method 3: Reset the update components

  See the following site:

  How to reset the Windows Update components?

  http://support.microsoft.com/kb/971058.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

  Method 4: Run the fixit

  See the following site:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

• Windows Update cannot currently check the updates, because the service is not running

  Whenever I try to update my windows vista with the recent service pack more computer, it tells me "Windows update cannot currently check for updates, because the service is not running." I'm running it from my admin account and I was curious to see if the same thing was happening with my other accounts. When I checked the they were fine and ready to go except the said that i needed approval admin even if I was giving him. I tried to turn admins accounts, but he wouldn't let me edit them, neither could I make a new account in general an admin or a fair standard.

  Vista service pack 1

  Processor: Intel (r) Core (TM) 2 CPU 4300 @1. 80 GHz

  Memory: 2.00 GB

  Norton 360 is my security system but did not install til about 2 weeks after a period of 1.5 years without protection (I was a fool, my computer had never seemed all operate differently) so I feel like this may be a virus any causing this problem cause, no idea on how do I fix? Thank you

  Thank you Matt, what ive down to realize, it's I'll just do a pc reinstall (what does this DVD) I know itll mean the deletion of all but ive already backed up what I need/want to so ill be fine. Dell Web site gave me all the information I need on how to do it.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Windows update error: Windows cannot currently check the updates because the service is not running

  Original title: Windows Update No. Longer - Vista business functions

  Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

  I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

  Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

  Thanks in advance,

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus software is installed on your computer?

  Follow these methods.

  Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2: How to reset the Windows Update components?
   http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

  Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

  I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

  At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

  Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

  At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

  However, the update message that a new version would be dl before I could go any further. So I did it.

  When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

  Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

  Thank you!

• Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

  When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

  Hello

  1. you made any hardware or software changes the computer recently?

  2. What is the number of update?

  3. do you get this message for all the updates?

  Follow these methods and check if that helps:

  Method 1:

  Step 1.

  Unplug all external devices, restart the computer, and then try to install updates.

  Step 2:

  I suggest that you follow the steps mentioned and try to start the Windows update service.

  Check if the following services are running.

  (a) Background Intelligent Transfer Service

  (b) cryptographic Service

  (c) Windows Update

  (d) Windows Installer

  a. Click Start, type "services.msc" (without the quotes) and press ENTER.

  b. double-click the service name in the Services list.

  c. under the general tab, next to startup type, make sure that automatic is selected.

  d. If the service is not already running, under Service status, click Start and then click OK.

  e. once the services are started and defined as running, try to install the updates and check.

  Method 2.

  You can follow the steps in this article: http://support.microsoft.com/kb/2509997

  Warning check disk.

  Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

  Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

  Hello

  Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 3 :

  Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Unable to do the Windows updates, error "Windows Update cannot currently check updates, because the service is not running.

  Only the news I get is an information box stating:

  "Windows Update cannot currently check updates, because the service is not running." You may have to restart your computer. »

  I checked that the service is running, and a process is running in the Task Manager.

  I have downloaded and run Microsoft Fix, it is said that it fixed the problem, but didn't.

  I cloned my old drive and installed my new drive in my laptop. It seems that there is no update history transferred when cloning, there is no history of updates now.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. The 'leftovers' Norton may be causing the problem. Roll up your sleeves & cross your fingers...

  [You can print these instructions for reference offline. If a step said to reboot, reboot! ]

  ACTIONS

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online enable WF immediately after the reboot!

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. right click on the file that you saved in step #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

  8. click right on the following link & SAVE to download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above & double-click on the script (i.e., ie8 - rereg.cmd) to run the command, then restart again.

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  10 a. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  10 b. do disappear/close the window pop up "Automated troubleshooting"! -then...

  c. 10, regardless of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  11 restart one last time & test by launching a manual check for updates.

  12. in response to this post with a status report - hopefully confirming that all six of the April 6 & March 2012 is installed correctly now.

  ===============================================================
  [1] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en [good for IE9, too!]

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• "The Windows Update cannot currently Check For Updates, because the Service is not running. You may have to restart your computer.

  Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.

  Description:

  When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.

  any help and suggestions would be very appreciated.

  Hello

  Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.

  Try the procedure described in the following article to improve your computer's performance.

  Optimize Windows 7 for better performance.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance.

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Error - Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer

  Original title - Vista sp2 64-bit windows program update is not running

  When I open the program "Windows Update", it has an "X" in a red shield symbol.  When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running."  You may have to restart your computer.  When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download.  However, it never downloads anything, and the rest of the exclaimation mark orange.  How can I solve these two issues?  I'm guessing that repair will set the other.

  Hi doubleott

  
  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  Method 2:

  You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
  http://support.Microsoft.com/kb/971058

  I hope this helps.