updates and selection of combo box

Got attached VI work only to find this small button to the right of the combo box is difficult to choose on the touch screen.

Need to enlarge the small button or even better replace with features similar to the RING.

RING allows any box use button on the touch screen.

Changing RING, required to re - write the code of the work, bad... so looking for suggestions.

This is 8.6

Tags: NI Software

Similar Questions

  • Unfortunately, important updates and selection of optional to install updates gives no information.

    Windows Update, you can click on the links "# important updates are available" and "optional updates # are available.
    But since I had a few problems with an update some time ago a got help from MS to sort I don't get no information on updates by following these links and the design of the window is not the same as it used to be.

    Usually there will be a list updates available with code update as "(K477415)" or similar.  Now, however, all I see is an empty box with 2 tabs to the left saying Important and optional. The two tabs are clickable, but nothing happens... no list of the updates available on one of them even if he states clearly he doesn't are updates available in both categories.

    The only thing I can do is have the update then browse the updates, they are in the section of installed updates and selected those to uninstall.  Or simply not install one of them. I can't select or deselect updated as to control those to install because they are not included.

    It seems that windows updates is screwed

    Try these:

    http://support.Microsoft.com/default.aspx/KB/971058

    http://support.Microsoft.com/kb/310747 (should work for vista and 7)

  • How can I update by program table combo box control type def?

    I use LV 8.6.1 and I am trying to create a table control panel object in which the user can select an item to list box for each element of the array.  I also have to periodically update the list of values.  Currently, I have configured the drop-down list box (selection of Automation sequence - see attached) as a type non-stricte def so I can write news channels to the list values when I need to.  But I can't seem to find a way to get the table (list of batches - see rasthaus) fill the new value drop-down list box.

    Automation box refelcts the new string sequence selection that I add programmatically, but the combo boxes in the batch list table control do not have the new channel.

    Anyone have any ideas?

    I have attached the screenshot of the drop-down list and table controls.

    Thank you

    Dan

    I considered that mention strings and values have a property that cannot be stored in a typedef, but when I tried it out, it seemed that it was.  So I just did not comment on that.  Maybe the strings and values may be among the typedef, maybe not.  The values of the controls certainly cannot.  Strings and values can be in kind of a gray area.  But you can certainly expect changes to a control to automatically update another control, because they are typedefs.  You cannot change the typedefs during execution.

    Let's put another example that has nothing to do with the values.  You have a regular typedef of a digital.  It is saved with the text in red in scientific notation.  You place two instances of this on your drawing.  You can programmatically change each other colors or other digital formats.  A change does not affect the other.  If it's a strict typedef, you would be locked in the way in which it was saved and could not change it programmatically.

    Take a look at this.  If you cannot programmatically, to update your channel list and values for a single combobox (a scalar string) you will be able to put up-to-date for when the combobox control is the data type for a table.  Simply get a reference to the element of the array.  It does not use typedefs anyway.

  • The selected text combo box.

    Hey people,

    I have this strange thing that happens with a drop-down list box. I use a loop to fill a table. The table is the data provider for a combo box. Everything works well except the first vaule of the table does not appear in the combo box as long as the selected value. I tried to adjust the index selected-1, 0, 1, but he never displays as soon as the page loads.

    <? XML version = "1.0" encoding = "utf-8"? >
    " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML layout "'absolute' = initialize ="buildcombo (); » >

    < mx:Script >
    <! [CDATA]
    [Bindable] public var MyOptions:Array = new Array();

    private function buildcombo (): void
    {

    MyOptions.push ({}
    label: "- SELECT -", data: 0
    });

    for (var i: int = 1; i < 10; i ++)
    {
    MyOptions.push ({}
    label: 'OPTION' + i, data: I.ToString
    });
    }

    }

    private void reset (): void
    {
    MyOptions = new Array();
    buildcombo();
    }

    private void ShowValue (): void
    {
    trace (MyCombo.value);
    }

    []] >
    < / mx:Script >
    < mx:ComboBox id = "MyCombo" x = "325" y = "145" dataProvider = "{MyOptions}" change = "ShowValue (); "/ >
    < mx:Button = "362" x = "224" label = "Reset" click = "reset (); "/ >
    < / mx:Application >

    
    
    
         
            
        
        
        
    
    
  • Update, and select from the same table

    Hello

    I have this selection - I've tested and work

    [code]

    Select
    case
    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTBT
    of other DTF_REEW_201301.KTBT - CTF_REEW_KUM_201301.KTBT
    end

    as KTBT_ISO,

    case
    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTZN
    of other DTF_REEW_201301.KTZN - CTF_REEW_KUM_201301.KTZN
    end

    as KTZN_ISO,

    case
    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTAB
    of other DTF_REEW_201301.KTAB - CTF_REEW_KUM_201301.KTAB

    end as KTAB_ISO,

    DTF_REEW_201301.brnrn,
    DTF_REEW_201301.ktat

    Of

    reewcore. CTF_REEW_KUM_201301 CTF_REEW_KUM_201301,
    reewdq. DTF_REEW_201301 DTF_REEW_201301

    where

    (DTF_REEW_201301.BRNRN = CTF_REEW_KUM_201301.BRNRN
    and DTF_REEW_201301.KTAT = CTF_REEW_KUM_201301.KTAT)
    and CTF_REEW_KUM_201301.KTMO = (DTF_REEW_201301.KTMO - 1).

    [/ code]

    With the result of KTBT_ISO, KTZN_ISO and KTAB_ISO I want to update the table 'reewdq. DTF_REEW_201301' - and this picture is in the select statement.

    I think I've tried every update statement - but no update does not work.

    I need something like this:

    [code]

    Update reewdq. DTF_REEW_201301 set t1 t1. KTBT_ISO =

    (

    Select
    case
    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTBT
    of other DTF_REEW_201301.KTBT - CTF_REEW_KUM_201301.KTBT
    end
    as KTBT_ISO

    Of

    reewcore. CTF_REEW_KUM_201301 CTF_REEW_KUM_201301,
    reewdq. DTF_REEW_201301 DTF_REEW_201301

    where

    (DTF_REEW_201301.BRNRN = CTF_REEW_KUM_201301.BRNRN
    and DTF_REEW_201301.KTAT = CTF_REEW_KUM_201301.KTAT)
    and CTF_REEW_KUM_201301.KTMO = (DTF_REEW_201301.KTMO - 1).

    ),

    T1. KTZN_ISO =

    (

    Select

    case
    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTZN
    of other DTF_REEW_201301.KTZN - CTF_REEW_KUM_201301.KTZN
    end
    as KTZN_ISO

    Of

    reewcore. CTF_REEW_KUM_201301 CTF_REEW_KUM_201301,
    reewdq. DTF_REEW_201301 DTF_REEW_201301

    where

    (DTF_REEW_201301.BRNRN = CTF_REEW_KUM_201301.BRNRN
    and DTF_REEW_201301.KTAT = CTF_REEW_KUM_201301.KTAT)
    and CTF_REEW_KUM_201301.KTMO = (DTF_REEW_201301.KTMO - 1).

    ),

    T1. KTAB_ISO =

    (

    Select
    case
    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTAB
    of other DTF_REEW_201301.KTAB - CTF_REEW_KUM_201301.KTAB
    end as KTAB_ISO

    Of

    reewcore. CTF_REEW_KUM_201301 CTF_REEW_KUM_201301,
    reewdq. DTF_REEW_201301 DTF_REEW_201301

    where

    (DTF_REEW_201301.BRNRN = CTF_REEW_KUM_201301.BRNRN
    and DTF_REEW_201301.KTAT = CTF_REEW_KUM_201301.KTAT)
    and CTF_REEW_KUM_201301.KTMO = (DTF_REEW_201301.KTMO - 1).

    )

    [/ code]

    But this isn´t of the labour code. Someone an idea please? Can someone help me please.

    Best regards

    Heidi

    Use MERGE:

    Fusion

    in reewdq. DTF_REEW_201301 t1

    a_l'_aide_de)

    Select the case sensitive option

    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTBT

    of other DTF_REEW_201301.KTBT - CTF_REEW_KUM_201301.KTBT

    end as KTBT_ISO,

    case

    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTZN

    of other DTF_REEW_201301.KTZN - CTF_REEW_KUM_201301.KTZN

    end as KTZN_ISO,

    case

    When DTF_REEW_201301.KTMO = 1 then DTF_REEW_201301.KTAB

    of other DTF_REEW_201301.KTAB - CTF_REEW_KUM_201301.KTAB

    end as KTAB_ISO,

    reewdq. ROWID that RID

    of reewcore. CTF_REEW_KUM_201301 CTF_REEW_KUM_201301,

    reewdq. DTF_REEW_201301 DTF_REEW_201301

    where DTF_REEW_201301.BRNRN = CTF_REEW_KUM_201301.BRNRN

    and DTF_REEW_201301.KTAT = CTF_REEW_KUM_201301.KTAT

    and CTF_REEW_KUM_201301.KTMO = DTF_REEW_201301.KTMO - 1

    ) t2

    on)

    T1. ROWID = t2.rid

    )

    When Fachhochschule

    then

    Update

    the t1 value. KTBT_ISO = t2. KTBT_ISO,

    T1. KTZN_ISO = t2. KTZN_ISO,

    T1. KTAB_ISO = t2. KTAB_ISO

    /

    SY.

  • Update and select ask when tablespace in backup mode

    Hello

    I have a question related to the DML statement when the tablespace is in backup mode. Suppose that when putting the tablespace in begin backup mode and then during user times run an update on this tablespace statement and validation of the transaction and any other user run the select query on the same data and image that will appear and where to display the data will be taken.

    steps to follow:

    alter tablespace users begin backup;

    Update emp set sal = 4000 where empno = 101;
    commit;
    Select * from emp where empno = 101;

    Now what result will appear and where data will get.

    Thank you
    Gulshan

    Hello

    alter tablespace users begin backup;
    
    update emp set sal=4000 where empno=101;
    commit;
    select * from emp where empno=101;
    

    As far as I KNOW, the database could function normally and you will not find the difference from the point of view of the transactions. If you check process and the Oracle architecture, bit blurry will be established towards the top and vectors to additional would be saved upward in the newspapers online redo - due to which size of redo would be higher than in normal operations. Second, you must be concerned about the backup - which may not be compatible. In order to better opt for RMAN instead of the user managed backups.

    -Pavan Kumar N

  • Selection of combo box hiding fields

    Hi guys,.

    I created a Questionnaire - form - with two sections (Sections A and B), where only a section must be completed, depending on the selection in the drop-down list box (including Australian States).

    -C' IE. If you live in the State x, Section B only RESPONSE.

    How to hide section/fields, when a certain selection in the drop-down list box?

    Pls help!

    You make the common mistake to use the assignment operator ('=') rather than the comparison operator ("is") in your if statements.

  • How to join the update and select the statement?

    Hello..

    As an example, I have a data as below:-
    Number Error_code
    B78 096666287111
    095476785 111 B78
    095478551 111 B78
    095478550 111 B78
    095738629
    095738629 111 B78
    095738629 111 B78
    064915145 111 B78

    My question is how can select any number of the table with more number of 10 numbers and Error_code = B78. Then, truncate all bumber to more than 12 digits and set the error_code = null.

    My result
    Number Error_code
    096666287
    095476785
    095478551
    095478550
    095738629
    095738629
    095738629
    064915145

    Thank you
    Balleur

    Ballet wrote:
    Hello..

    I want to talk about the number as below:-
    Select * '096666287111' * no, error_code 'B78' Union double all the
    Select * '095476785111' *, 'B78' from dual union all
    Select * '095478551111' *, 'B78' from dual union all
    Select * '095478550111' *, 'B78' from dual union all
    Select * '095738629' *, "of all the double union
    Select * '095738629111' *, 'B78' from dual union all
    Select * '095738629111' *, 'B78' from dual union all
    Select * '064915145111' *, 'B78' from dual

    The total number as above would be not fixed because the table will be updated daily.

    Did you read my post. I told you it's just one example of data you can ignore the with totally would adopt.
    >

    What the update?... How can I update the exisitng with the output data?

    Here is a detailed example.

    SQL> create table t
      2  as
      3  select '096666287111' no,'B78' error_code from dual union all
      4  select '095476785111','B78' from dual union all
      5  select '095478551111','B78' from dual union all
      6  select '095478550111','B78' from dual union all
      7  select '095738629','' from dual union all
      8  select '095738629111','B78' from dual union all
      9  select '095738629111','B78' from dual union all
     10  select '064915145111','B78' from dual
     11  /
    
    Table created.
    
    SQL> select * from t
      2  /
    
    NO           ERR
    ------------ ---
    096666287111 B78
    095476785111 B78
    095478551111 B78
    095478550111 B78
    095738629
    095738629111 B78
    095738629111 B78
    064915145111 B78
    
    8 rows selected.
    
    SQL> update t
      2     set (no, error_code) =
      3  (select no, error_code
      4     from (select rowid rid,
      5                  case when length(no)>=12 then substr(no,1,9) else no end no,
      6                  case when length(no)>=12 then null else error_code end error_code
      7             from t
      8            where error_code = 'B78'
      9              and length(no)>10) t1
     10    where t.rowid = t1.rid)
     11   where exists(select null from t t1 where error_code = 'B78' and length(no)>10 and t.rowid = t1.rowid)
     12  /
    
    7 rows updated.
    
    SQL> select * from t
      2  /
    
    NO           ERR
    ------------ ---
    096666287
    095476785
    095478551
    095478550
    095738629
    095738629
    095738629
    064915145
    
    8 rows selected.
    

    I hope that now get you what I'm doing.

  • Windows update and the eternal Saga Driver

    I have Win Vista Home Premium 64 - bit version. I also have a Samsung CLX-3175 Color Laser printer.

    Windows Update keeps reporting that an optional update for this printer is available, published on 29/04/2009.

    I made the following...

    The driver installed and checked again - Windows Update reports that's always ready to download
    The installed driver, restarted my computer and then checked.
    Looked at this forum and followed the instructions on renaming the folder C:\Windows\SoftwareDistribution - still does not work
    Contacted Samsung to see if there is anything that I should know - they passed me back here

    Any suggestions?

    Shayne

    Hi SkeE007,

    This problem may occur if you do not install the updates in the correct order. An old update does not install on a new update because newer versions of files are detected on the system. Therefore, the installation of the older update is unsuccessful; However, no NDR is sent to the Automatic Update component. Thus, the automatic update interprets this setup as a successful operation. Because the update has not been installed successfully, you continue to benefit from the update until the server still offers the update.

    Follow the steps mentioned below:

    Step 1: Rename the Catroot2 folder


    To rename the Catroot2 folder, follow these steps:

    1. click on Start, type cmd in the Search box, right-click cmd.exe , and then click run as administrator.  At the command prompt, type the following commands and press ENTER after each command:

    net stop cryptsvc
    Ren C:\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output

    {Delete all the following folder tmp*.cat files: C:\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    Step 2: Reregister DLL files that are associated with Cryptographic Services

    To register .dll files that are associated with Cryptographic Services, follow these steps:
    Click Start, type cmd in the Search box, right-click cmd.exe , and then click run as administrator.
    At the command prompt, type the following commands and press ENTER after each command:

    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll
    output

    Note If you are prompted, click OK .

    Click Start, type cmd in the Search box, right-click cmd.exe , and then click run as administrator.
    At the command prompt, type the following commands and press ENTER after each command:

    regsvr32 softpub.dll
    regsvr32 wintrust.dll
    regsvr32 initpki.dll
    regsvr32 dssenh.dll
    regsvr32 rsaenh.dll
    regsvr32 gpkcsp.dll
    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll
    regsvr32 mssip32.dll
    regsvr32 cryptdlg.dll
    output

    Restart the computer.

    Step 3: Hide the update

    Since the update dates back to April, you can simply right click on the update and select hide update and it will not appear on the list the next time that you use the update service. We have hidden the update because it is very possible that you would have received the latest version of this update that is already installed on the computer.

    I hope that helps!

    Thank you and best regards,
    Abdelouahab Microsoft responds to the technical support engineer

  • Someone advise me on how to record and remember the actual information from a group of combo boxes?

    I have a set of combo boxes save a devices status information. I would like to record and remind all selections. I know there are properties to access the selected items, but the research on, I do not know the technique to do so. I want to save/recall in XML format. I made an attempt, and he saved the combo box data, but not the selections. Thanks for any help.


  • How can I do a multiple selection in Enum control or control of the ring or control Combo box

    How can I do a multiple selection in Enum control or control of the ring or control Combo box

    You can not.

    You can use a listbox control.

    An alternative solution is to write the code and each selection, the user gives an enum, for example, can be send to a table and invite the user to continue to select...

  • Selected pass contains a string indicator combo box when you press the Enter key

    Hello

    How to pass selected contains a string indicator combo box when you press the enter keyboard key?

    Right now I use a button to send the command selected in the combox to string indicator.

    The photos shows a combo box with the button that I use to send to the indicator as example.

    After the user selects the text to pass, "send the cmd" button must be pressed to pass the string.

    I need to pass the selected string when the user press enter on the keyboard rather than press the button 'send cmd '.

    Kindly to you needing help.

    Hello

    You can use a structure of the event to capture keystrokes and filter, transmit only the drop-down list box "value of the indicator of channel when you press the return or enter key."

    Let me know it the joint allows an example (in LV 8.6).

  • I cannont turn on automatic updating. I have is gray. Disable the automatic update is selected but also gray and selected.

    I cannont turn on automatic updating.  I have is gray.  Disable the automatic update is selected but also gray and selected.

    you have the service disabled?

    Click Start > run > type in services.msc box and Microsoft Management Console will be open.

    Search for automatic updates. Right-click the line, and then click Properties. In the dialog that opens, make sure Startup Type is automatic. Click on apply. Wait for it. Then click Start under Service status. You will see another pop-up window but it is a progress bar. If the service does not start, you will get an error. Otherwise, you will see wuauserv in the Task Manager. You should also see the yellow shield which shows you download updates. Also check your Windows Firewall and third-party firewall installed on the machine. Another place is the router/modem. You may need your ISP to help with the party.

  • Selection of group and the radio text box

    I have a form with a question like: "How did you who are we?" and a radio with some choice group. One of the radio group choice is "other - please describe! When selected, a text box changes to 'read only' and the user can write something. I'm not able to update a record with the user's selection in a field in a table (I can save either text or radio group selection area). Any help? Thank you!

    You should check the value of the selected option button. If it's not ' I have this answer: ", assign the value to $_POST ['Proposal_text'].

    If ((isset($_POST["MM_update"])) & ($_POST ["MM_update"] == "form1")) {}

    If ($_POST ['proposal']! = ' I have this answer: "") {}

    $_POST ['Proposal_text'] = $_POST ['proposal'];

    }


    $updateSQL = sprintf ("UPDATE sarcini SET solutie_6 = %s, introd_6 = %s WHERE id_question = %s",

    GetSQLValueString ($_POST ['Proposal_text'], "text").

    GetSQLValueString ($_POST ["'Full_name"], "text").

    GetSQLValueString ($_POST ['id_question'], "int"));

  • Script to change the selection of combo based on numerical values box is entered in a text box

    I implemented a form of feedback to student and I'm looking for how to refine the process for the user. Please see the image below. As you can see that the form has individual learning, each of which has three statements of "feedback". These are currently the combo boxes with predefined statements selected by the user in the menu dropdown. These statements are connected digitally to our marking scheme that is if the feedback statement uses the word "limited", it matches with a score of 20-39 on our scale of correction. If she uses the word 'excellent', he corresponded with a score of 70-100.

    Limited 20 - 39

    40 - 49 adequate

    good 50-59

    very good 60-69

    excellent 70-100

    Currently, the user enters the brand in the small text box size in the right corner of the relevant learning outcomes. The user must then manually select the corresponding instructions of feedback from the drop-down list box. Which is quite tedious. Here's the thing:

    Most of the time statements all match the digital brand, i.e. If the student received a score of 55, then feedback statements would usually all be in the 'good' category: '.. '. good quality research... «, ».. good analysis... «, ».. good research management... ". It would be a great time saver if the statements could be scripted to react to the numbers in the text box. For example, when the user types in a notes 50-59 feedback instructions themselves define automatically to all be '... good... ". There's still a thing.

    It is important that the user has the possibility to change the declarations of individual feedback if necessary. that is a mark of 58 may require two statements of feedback in the "good" and the other in the 'very good' category: '.. '. good quality research... «, ».. good analysis...', '... VERY good orientation of the research... ". The user must therefore always the option to bypass the automatic selection if necessary.

    It's beyond my Basic scripting capabilities, but I wonder if anyone can break this problem? Your help would be much appreciated.

    feedback-form-screenshot.jpg

    Thank you

    Charlie

    Hello

    I create a simple sample here - https://acrobat.com/#d=FFhf7MQtKrH5iickDJBBxw

    I used the blur of the text field event so that the code is triggered when you tab to or click elsewhere in the form, the code can easily be moved.

    I named the fields

    Text1

    Dropdown1

    Dropdown2

    Dropdown3

    and these will have to be renamed according to the names of your fields.

    Hope this helps

    Malcolm

Maybe you are looking for

  • Could not open any project or external drive backup files

    Hello world The way I got things set up, is that my final cut pro project has been saved on the external drive. Whenever I open it, it picks up from the external hard drive. Recently, I had a power outage that stopped my external drive and crashed my

  • Satellite L10 - 333 poster machine trouble error

    Can anyone help with this you problem? I tried to use the standard drive re format the computer, but having this error problem 'bad Machine '.I tried searching and tried the "2) CD-ROM BOOT METHOD of INSTALLATION. When I ran the CD after restarting W

  • Problems with the start time/Display Tune (r) / Vista Business

    Dear community of Mic,I have two problems that slow down my computer. (1) start time:After my computer starts, it loads quickly in the logon section. However, after I give my login informationthe HP computer HP monitor goes black for about two minute

  • NetBook HP 5101 and Intel 5350 or 5150 WiMax/WiFi

    Will be the feature of an Intel 5350 WiMax or WiMax/WiFi 5150 mini PCIe card work in a netbook HP 5101? Can anyone recommend a source in the United States other than ebay/unauthorized of 5350 Intel or Intel 5150? I'm considering buying a HP 5101 usin

  • Huge performance impact after installing a new 760 GTX graphics card

    With my motherboard Foxconn Renaissance x 56, I get a variety of RAM that is usable, but not wire after installing my new GTX 760. When I run the Windows system it stutters and takes up to 15 minutes to start, there is a problem with some of the RAM