UPDATES CANNOT INSTALL CODE646

Similar Questions

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• KB2656353 security update cannot install (error 0 x 80070643)

  original title: KB2656353 security update cannot install

  I was on the Windows Update site and downloaded the updates for my computer.  The same update: a security update for the Microsoft.NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353) does not install after several attempts.  Error 0 x 80070643 and error Code: 0 x 643.  I don't know that much about computers so I would be so grateful your help or Fix It solution.   Thank you.    C. Stewart

  See: How to get help and support for this security update
  http://support.Microsoft.com/kb/2416447

• Windows Update cannot install KB2656353

  Windows Update cannot install KB2656353 on my Windows XP Professional SP 3 machine.  I tried to update windows install to 4.5 & manually install the update, but the installation stops when someone asks me for the Microsoft .net Framework 1 (disc 1).  How to solve this problem?  Thank you.

  Hello

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow the steps.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article to reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Vista KB973917 update cannot install. Help!

  I can't install the windows KB973917 update I get error code 800736B 3 that I even tried closing disable my firewall and windows defender and it still will not be installed. I scanned my pc for any virus and possible hard drive errors but still cannot install. any suggestions?  I use mckafee and I have spybot search and destroy (nothing is set to automatic on it)

  kclady36,
  Given that the SFC found corrupt files and was not able to fix them, which leans toward a possible broader problem at hand.  You can follow the directions at the bottom of the article for System File Checker to replace corrupted files.

  Or you can reinstall Windows in one of two ways.
  You can do an upgrade to the current installation.  However, you need to remove all the service packs that are not on your installation media.
  The other choice would be a restore clean installation or factory, according to your support system.  If you make this option (which if it were me, would be my choice), you must back up all your data, then the reinstallation of the system and to get all installed updates and antivirus software and running upward, scan your data before you restore on the PC.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update cannot install the update of Security No.2686509

  Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

  Hi LyneDerksen,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Service pack guard repeatedly offered on windows update, cannot install Service pack 2 and Internet explorer 9

  Original title: the Service Pack is installed a number of times.

  There are already five heads of the installation. He keeps on reappearing as an update of Windows Vista! What kind of error is it? It TI a malware? I can't install antivirus from other anti - virus vendors products. In this case I can not install Service pack 2 and internet Explorer 9, too. Please allows us to make a way to solve this problem.

  Hello

  
  1. is the Service pack 1 is already installed on your computer?
  2. what version of service pack offers you to install?
  3. do you get an error message?
  4 are. which antivirus products you referring?
  5. have you made changes on the computer before this problem?
  Method 1:
  You can run the fix - it from the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can perform a clean boot, and then try to install the updates. Read the following article.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.
  
  Method 3:
  Reset Windows update components, and then check if it helps.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Method 4:
  You can try the procedure described in the supplied knowledge base article and check.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Warning of CHKDSK
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  Note: make sure that you back up the data before proceeding with the disk check.
  See also:
  
  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602

• Windows Update cannot install Office SP2 and KB973924; codes error 78(f) and 643

  Hello

  I'm currently under Windows 7 64 bit which has been updated to XP in January this year.

  Since July, Windows 7 update tried to install following updates without success:

  1) the 2007 Microsoft Office Suite Service Pack 2 (SP1/SP2) - error code generated 78(f)

  (2) security Update for Microsoft Visual C++ 2008 Redistributable Package (KB973924) - 643 generated error code

  Windows Update tried to install these several times but without success.

  Also, I tried to install iTunes and get the following error:

  "An error occurred during the installation of assembly"Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", processorArchitecture, publickeyToken = "1fc8b3b9a1e18e3b" is"x 86".  See Help and Support for more information.  HRESULT: 0 X 80070002. »

  I tried many internet research to try and find a solution to these problems but have had no success.  I tried the following:

  (1) re-intsalled .net framework 4

  (2) run the System File Checker that could not so I tried my windows disk, but it could not start because the message says that two updates were waiting to be installed

  Now, I'm really worried that I have a big problem with Windows.

  Well, any help that you can give to avoid reinstalling my system would be appreiated.

  Thank you very much

  Thanks for your help Irfan H and PA bear but unfortunately none of the above suggestions has solved my problem and I couldn't find another solution on the internet that worked.

  Finally, I had to do a clean install of my system using an image of my hard drive that I created during my first installation of windows 7.  Now, everything seems to work properly and installing updates without problems.

  Thanks again.

• Windows Update cannot install service pack XP how I remove it from the queue of the update?

  I have Win7 that came pre-installed on my new computer HP (Win7 Pro). I used PCMover to bring certain programs and files from my OLD Dell (XP Pro) to my new computer. Everything is fine, but I have in my folder of programs Window XP Service Pack 3-30/07/2008 version 20080414.031525.

  1. If this titled Window XP is in my program folder if my OS is Win 7?

  2. If I can successfully remove Windows XP Service Pack 3 of my programs - how can I remove the update for XP which is in my update Quebec?

  Hello

  ·        What is the update that is offered by windows update, number of KB?

  ·        What is the size of the file and the display name in the program file?

  I suspect it's an update to sp3 Office which is available in the update of Windows.

  Follow the steps mentioned in the article given below to verify the update is offered.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Uninstall an update - cannot install it again

  I use Windows 7 Professional X 64. I uninstalled an update (KB976264). Now, I am not able to install it again:

  -Windows Update does not list it a update available

  &

  -I can't install it after you download it manually (he asks that it can not be installed on my pc, although I used the x 64 version)

  Windows Update does not list it a update available

  Then, you have no need to (re) install. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Microsoft Update" cannot install the downloaded updates

  CURRENT SITUATION (11 October) - PC with Windows XP Pro.

  -To access the site MicrosoftUpdates (with IE8) is OK (yesterday almost impossible;) Very slow PC).

  -"Search for updates for this computer" is possible, but it takes a long time before the list appears. Most people with this same problem think it hangs, with the activity display bar process for eternity, never finishing. But I just think, they are not patient enough, because it's really time consuming.

  -Meanwhile, the CPU takes almost 100% of the activity, caused by service a specific svchost.exe , which I identified as 1436 service id. (EDIT: maybe it was actually 1644 as I see today)
    \system32\svchost.exe - k netsvcs
   
  All updates are detected for installed software and are shown in the usual categories. The installation of each of the updates appears one by one.  However immediately after fact following a message that lists updates whose installation failed (usually 100% fail to install for now)

  What I have:

  1. I checked 3 services to ensure that the correct settings
  -Implemented automatic update (automatic, started)
  -EventLog (automatic, started)
  -BIT was missing, but I managed to install it again

  Not without effort, I found these guidelines:
  http://helpdeskgeek.com/how-to/Background-Intelligent-Transfer-Service-will-not-start/

  Now the BITS he listed (with auto-start), but it fails to start, even manually!
  If I concentrate on the BITS service (could not be started) this may to solve the "problem of update.

  2. I started Windows PC files check sfc/scannow and restarted the system (nothing wrong detected or corrected... I think)

  3. change of standard browser from Firefox to IE8

  Thank you for the help

  Thanks Nirmal S,

  I apologize for not having mentioned earlier that this problem has been resolved.

  FYI, I use Avast! Antivirus (free version). No malware was involved, but thanks for the useful information.

  I found a ready-made channel to reinstall the BITS service, which apparently takes care of a few other things in the registry.  I do not understand what it does, but it worked for me.

  Current situation:
  -Little service is installed and is now ok.

  -The Microsoft Update site updated analyses required for the installed software/hardware and displays a list. It downloads the installation of each update program, but not an update can be installed.

  
  Since the fundamental problem, I recently started a new separate topic for the same question,
  to avoid a much too long discussion here. However, if someone wants to add suggestions hereanyway, you're welcome. Thank you

• Windows Update - cannot install Windows SP2 or KB 979911.

  I have a Dell Inspiron 1525 with Windows Vista Ultimate 32-bit Edition installed, and in January he ceased to apply the updates of Windows security.  I tried to solve this problem, but eventually gave up and reinstalled windows (gasp!).

  Well, the drive I got for the machine was 2008, so he installed Windows Vista SP1.  I then applied a bunch of updates (via Windows Update) until I came to KB 979911, when it is not (always) with error 80073712.

  I did a SFC/scannow, but there are no errors.  I then installed the Microsoft Fix it Center and installed Windows Update Fixer.  Whenever I run this from I get Windows Update components detected problems must be repaired - and the result is successful in repairing the Windows Update components.  I also get the default data location Windows Update question changed - (verified result) and the comment "where Windows Update stores modified data must be repaired.  I doesn't matter if I know.

  I also see locations of repair by default Windows Update - works not (I don't know how to run) and a comment to the locations of Windows Update change to the default settings of Windows (I don't know how do either).

  I then run KB947821 (CheckSUR) to check the status of preparation of system.  and get several registry errors 2 of each of the components and missing packets related to Package_20_for_KB937286 in the Microsft_Windows_Help_CoreClientUAHP-Pachage (and the corresponding notice of UAUE) as well as the x86_microsoft-windows-help - artcone.resources and the related medctr.resources.

  Then... I try to install SP2 (which is now coming through my Windows Update and it of fine, restarts the machine, staging 3 100% and then comes back, restarts and continues the reversion.)  He returned in the form 800f082c of the error.  Installation via the stand-alone stub leads to the same result.

  FYI... I have run diagnostics on hardware and all is well.  I'm at my wits end here, so any help is appreciated.

  Thank you

  Harry Mudd, rogue interplanetary

  Hello

  1 did you change on your computer?

  2 are you able to install other updates successfully?

  Method 1:

  I suggest you to backup all important data and restore.

  How to back up or transfer your data on a Windows computer

  http://support.Microsoft.com/kb/971759

  Method 2:

  I suggest you perform the upgrade on the spot and check.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

• Vista updates - cannot install

  original title: updates for Vista

  I seem to have problems with updates from my computer. Whenever I turn on the computer there are 28 or so updates, if I click to update. The computer does its thing, restarts, but said while some updates not configured correctly so come back to the original settings. After reviewing the history of update, it fails to update the update of security for Vista, or any update to do with Vista.  Do you have any suggestions as to what I can do to try to solve this problem. It seems to be stopping me downloading new software like Silverlight (used by the sky so that I can watch TV on my computer).

  Hi, Sarah Hack,.

  Open windows update and click on View installed updates.  Check the ready to install updates are already installed in the Update menu.  If some are pre-installed, a file may not install correctly and the KB may continue to appear.  Right-click on it and click Hide.  You will not see in the ready to install the list and it will eventually disappear.

  The list of all the errors on the KBs, but also the KB #.

  You can also try to install dates successively until displaying the KB and error # s necessary for further assistance.  Thank you.

• Photoshop CS5 update (cannot install 12.0.4 - error: update does not apply)

  Hello - I am new to this forum, so please forgive me if my question is somehow out of line.  I need to update Adobe Photoshop CS5.  Bought for the use of the company in 2011 (purchased in DVD format).  I recently installed on a new computer (iMac El Captain 10.11.1 running).  I downloaded Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5, but when I run it, I get error "update is not applicable."  Impossible to contact customer service - seems the forums are my only hope.   Thank you.

  Hi Serottacsi,

  Creative suite Adobe CS 5 is a very old software and the operating system you are using is the most recent, so there may be compatibility issues that adobe has not tested these applications on newer operating systems.

  However, you can try download & install the update for Adobe Photoshop CS 5 from the following link:

  Adobe - Photoshop: For Macintosh

• Error code: 80243004 (cannot install updates)

  error 80243004 while installing updates

  Hello
   
  1. which updates cannot install?
  2. what operating system do you use?
   
  Method 1.
   
  Windows provides a built-in utility that can automatically find and fix some problems with Windows Update.
   
  Open the Windows Update troubleshooting tool by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click Fix problems with Windows Update. For more information, refer to the article below.
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Method 2.
   
  If the problem persists download us this update manually and install. Here is the link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5a058f6f-c3d3-4cbb-8c6c-ac76c94d3d0e&displaylang=en
   
  Also have a look at the article below.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339 

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]