Updates not configured correctly, return fees

Similar Questions

• updated configuration failure Vista - updates not configured correctly. returning from the changes - code Error 80070020

  Updates installation but to the message indicating a configuration step 2 bed 'updates not configured correctly. reverting changes"error code is 80070020.

  http://support.Microsoft.com/kb/883825>

  08/10 / 1106:12:26

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Windows Vista: updates are not configured correctly, returning from changes

  my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

  So far there are problems or there are many who have this problem?

  Have you tried to disable temporarily running anti-virus software?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/#appliesTo

  Troubleshooting in Win 7 vs KB971058 for Vista
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

  The system update tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• Error: "updates not configured correctly" not able to install updates in Windows Vista.

  Original title: updates not configured correctly.

  With the many others who face the same problem.

  I get "Updates not configured correctly".
  After waiting for centuries, "returning changes."
  "Fix it" does not help, as usual.
  Supposed to be important updates.
  Microsoft will never get this sorted shambles hike?
  With the exorbitant profits they make, why not recover?
   

  Hello

  You did it changes on your computer before this problem?

  You can follow this link & check if the problem persists:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  
  Reference: the problems with installing updates

  Hope the helps of information.

• Updates not configured correctly restore changes (stays on and will not shut down)

  When I turn on my computer laptop windows vista, the screen «updates not configured...» "stays on and won't. Seriously, I was sitting there for five hours, trying to make it disappear. I tried to reboot in safe mode, last known good configuration etc. I don't have a Windows Vista disc, but I really need all the files on the computer for school work. I'm sure you'll enjoy it, it's almost time review and I would be devastated to lose all my tickets!

  Any help would be great!

  Hey Joe Smith,

  What happened when you try to start in safe mode?

  Method 1
  I suggest to disconnect all external devices except the mouse and keyboard and check if you are able to boot to the desktop.

  Method 2
  You need Windows vista disk inorder to continue further troubleshooting. If you use a computer Original equipment manufacturer (OEM), I suggest you to contact the manufacturer of your computer for Windows Vista disc. Once you get the Windows Vista installation disc, you can try the steps from the following link.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

• received update for net framework 3.5service pack 1 and net framework 3.5 family update [kb951847] x 86 for about 2 months. my computer keeps trying to install it. He returned saying updates were not configured correctly. returning from changes.

  updates will not be installed on the computer

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon.

  Mick Murphy - Microsoft partner

• Updates are not configured correctly.

  I have a Dell Xps 420 with Vista 32 bit. Last night I let it update and standing on its own, when I turned it on this morning it said update 3 of 3 0%. When he arrived at 100%, it would go to the display of password for a brief second and say it would close down, he did this loop for a few hours, and then he changed to the updates were not configured correctly, returning changes and then restart. I tried to boot into safe mode and on the sofeware cd, but nothing works. Can someone give me a step by step process to solve this problem. Thank you

  Try to rename the pending.xml from the command prompt using the following steps:

  (1) open CMD prompt as administrator (start--> cmd--> right click--> Run As Administrator)
  (2) enter the following information: takeown /f C:\Windows\winsxs\pending.xml
  (3) enter the following information, and then type your user name in the designated place: cacls C:\Windows\winsxs\pending.xml/g : F
  4) go to C:\Windows\winsxs\ through computer and rename the pending.xml pending.bak
  (5) run Windows Update again.

  Kind regards.

• Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

  Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

  Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

  Hello

   
  You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
   
   

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Qosmio X 870 and Windows update 8.1 - secure-Boot is not configured correctly

  After update of windows 8 for windows 8.1 a watermark appeared in the dekstop who says:
  + Windows 8.1 secure Boot is not configured correctly build 9600. +

  Is something wrong with the installation of the update?

  Thank you much in advance.

  I have a Qosmio x-870.

  If you see a message "Secure startup is not configured properly" in the lower right corner of the office, this means that Secure Boot is off or has not been configured correctly on the PC.

  Secure boot can be enabled or disabled in the BIOS.
  You need to access the BIOS and should allow secure boot.
  Save the changes and restart the device.

  Your comments would be appreciated

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• Updates defective installation as computer repeatedly sending message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Faulty installation of update as a computer several times to send the following message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Hi NickGodin,

  You can try these steps and see if it helps.

  Step 1:

  If you are unable to boot into normal mode, you can read the following article and try the steps to run the system restore.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  Step 2: When you are in normal view, you can see the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  You can also try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• SecureBoot is not configured correctly (Windows Pro 8.1 with Media Center)

  I have a HP Pavilion H8 - 1360t purchased July 2012 with Windows 7.  The system has installed UEFI and AMI BIOS v7.09.  I have upgraded to Windows 8, first preview, then the final version.  Yesterday, I upgraded to 8.1.  I now have a watermark bottom right indicating «SecureBoot is not configured correctly...» "and I get activity 2002 of the VerifyHardwareSecurity ' SecureBoot is currently disabled.  Please enable SecureBoot by the system firmware.  I have checked the BIOS and can't find an option to activate SecureBoot.

  HP an article stated that a BIOS version of 8 support SecureBoot but there is no upgrade available for this relatively new machine BIOS.

  Another article warns against upgrading an HP computer preinstalled with Windows 7 to Windows 8 with the following statement:

  " UEFI technology allows a number of improvements in the PC security and performance and is being implemented in all PC pre-installed with Windows 8.". Some PC preinstalled with Windows 7contain UEFI technology and can be modified to provide these features. However the process requires skills and specialist to complete at this time, HP provides instructions to make this change. »

  So the question for HP is: what will be a BIOS level or another solution provided for this modern computer to fully activate the SecureBoot?  I've seen a lot of posts on the forums Microsoft Community of other owners of H8 - 1360T so it's not unique to me.  As a player for Microsoft important material, it is hoped that HP would be sensitive to their customers.  As a customer of long date HP (belonging to two previous HP pavilions - the system is 3rd in the House), I sincerely hope that I have not made a mistake in my material of choice provider.

  Please download and install the update to the BIOS of your system from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61511.exe

  This will restore all the functions BIOS necessary for Windows 8/8.1. After updating the BIOS, go into the BIOS and enable the SecureBoot option. This will stop the message secureboot on Windows 8.1.

  This also enables the BIOS UEFI environment.

• Your device is not configured correctly(code 1) error

  Hello

  I have windows XP currently installed on my computer and I also have the new hard drive (seagate 500 gb) installed on my computer.
  I am facing the error with my cell phone (samsung galaxy s duos GT s7562) with my computer and I am unable to make any transfer of media through the PSG.
  Under portable devices > PSG > properties, I get the following message. > "this device is not configured correctly. (Code 1)
  To reinstall the drivers for this device, click on reinstall. When I try update driver it shows "your device is not configured correctly (code 1 error). I tried gel and reinstall driver MTP via "scan for hardware changes", but it does not yet solve my problem.
  How can I get my samsung android smart phone connected to my pc and start sharing media through the PSG. problem certainly lies in the pc.
  Help me out.i am going nuts about that...
  Pankaj.

  Hey,.

  have you found this KB link?

  See "Code 1" from the link

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123/en-us