Updates stopped downloading and installing

My machine Windows 7 Pro ceased to update since September 2015. When I try to run the update of the common mistake happens as Code C0000022 Windows update encountered an unknown error.  When I try to get help on the error all the error arising under the help are the 800...  80244022 errors.  The last successful update was 09 29, 2015 and KB30868708.

I tried and was able to install the patch that I thought could solve the problem.

Here are the screenshots-

Anyone encountered this?

Can anyone help?

It's a Dell Precision T3600 16 GB of RAM 2 discs each 1 TB.

Not sure what could be the cause,

Thankis

Ricardo

Please run the Windows Update Troubleshooter:
http://go.Microsoft.com/?linkid=9830262

Please provide details of any problem it reports as not fixed.

Tags: Windows

Similar Questions

  • 0 x 80070424: when I use Windows update to download and install hardware (MTP SAMSUNG Mobile device).

    Hi, I got error 0 x 80070424, when I use Windows update to download and install the hardware (SAMSUNG Mobile MTP Device), no matter what Advisor.

    Thank you

    Essam

    Hello

    Thanks for posting in the Microsoft community!
    You have reached the right forum for your question. If I understand correctly, you receive the error 0 x 80070424 when you Windows update to download and install the equipment. I suggest you follow the troubleshooting steps to check if this may help.

    1. don't you make changes on the computer before the show?
    2 is the issue limited to Windows update?

    Method 1:
    Run the fix it and check.
    http://support.Microsoft.com/mats/windows_update/

    Method 2:
    Try the procedure described in the article knowledge base and check if that helps:
    Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall
    http://support.Microsoft.com/kb/968002

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
    http://support.Microsoft.com/kb/322756

    Just reply with the results. I'd be happy to help you further.

  • Wndows updates keep appearing as updates to download and install.

    Original title: Wndows updates

    KB2657424 updates Windows and KB 2656351 already installed on the PC but when I click on the Windows Update Web site, they keep appearing as updates to download and install

    Have you tried to launch this tool to repair the. NetFramework http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

    Let us know if it is able to run and or repair of components of the. NetFramework that are damaged.

  • Security updates keeps downloading and installing the same updates (repeat)

    I have my computer set to auto for the security updates and I started to notice that there are updates 7 days a week. There still 5 updated and they have installed as well... What follows are updates of the question:

    Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656368)

    Download size: 0 KB 0 minutes (downloaded; ready to install)
    A security issue has been identified that could allow an authenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

    Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2686827)

    Download size: 0 KB 0 minutes (downloaded; ready to install)
    A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

    Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656405)

    Download size: 0 KB 0 minutes (downloaded; ready to install)
    A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

    Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2604121)

    Download size: 0 KB 0 minutes (downloaded; ready to install)
    A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

    Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)

    Download size: 0 KB 0 minutes (downloaded; ready to install)
    A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

    Please help me solve this problem that they repeatedly settled as well... need for removal?

    Hello

    Were there any changes made on the computer before the show?

    I suggest you to see link and check if it helps:

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339

    Let us know if it helps.

  • Updates are always safe to download and install on my computer?

    After you receive the message that I have updates to download and install, is ALWAYS completely safe to do? With my last PC, I got a typical announcement, completely legitimate-looking that I had "several important updates" that I needed to download and install. I have had these ads before on the necessary updates and always took the lead with download and install them. BUT after the download and installation of these special "updates", my computer was completely dead and never worked again - I couldn't even get it to blue screen! Absolutely no response when I turned it on. Since there was nothing wrong with it before these "updates", I can't help but conclude that some of these "updates" are not only wrong, but also deadly!

    Hello

    Yes always install updates. They solve the problems of security and improve the stability of Windows. If you have any problems, create a new question and we can help you solve these issues :)

    concerning
    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • I have download and install more updates before the recent?

    I have more than 60 important updates to download and install some of 2009! can I download the older first? or I can just do them all at once? If I do them all at once about how long that would take? someone help me please!

    You use Windows Update?

    Do a scan: http://windows.microsoft.com/en-US/windows-vista/How-can-I-tell-if-my-computer-is-up-to-date

    Then start with say a little at a time if you like in chronological order as noted in THE.

  • Windows Update stops download of updates and install updates same as if they were never installed

    Windows Update stops download of updates and install updates same as if they were never installed

    Hi Skimbrell,

    Welcome to the Microsoft Answers Community Forum site!

    To resolve this problem, determine if the update has been installed. Then, use one of the methods in the section "Troubleshooting the problem.

    Determine whether the update has been installed

    To determine if the update has been installed, use one of the following methods.

    Method 1: Examine the history of installation
    To view the history of installation, follow these steps:
    1. click on Start, point to all programs, and then click Windows Update or Microsoft Update.
    2. on the Web site, click view update history.
    3. Locate the most recent entry for the specific update.
    4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

    For more troubleshooting information, visit the below mentioned link:
    http://support.Microsoft.com/kb/910339/

    Method 2: Reset Windows Update components.
    In order to reset Windows update, visit the following link:
    http://support.Microsoft.com/kb/971058

    I hope the above helps solve your problem!

    Thank you best regards &,.
    Calogero - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • December 15, 2011 updates to Windows Vista. After that automatic download and install on stop, my computer would not start up

    Original title: 15 December 2011 update of Windows Vista

    After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!

    Hello

    I suggest you to see these steps:

    Step 1:

    I suggest to reset Windows Update components and follow step 2.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Step 2:

    After reset, you will find that Windows 8 or 9 update that must be installed.

    Try to update one by one and check.

  • Impossible to download and install the latest versions to iCloud and iTunes. Whenever the download is finished, I get an error message and stops.

    Whenever I try to download and install the latest versions to iCloud and iTunes I get error messages.  Just like the download ends, I get an error message and the Apple installer stops the download. Then it shows that the new versions are available for download just aif I had never tried to do it in the first place.

    Try these direct links:

    • 12.3.2.35 iTunes for Windows (32 bit) (Windows 7 or later) - iTunesSetup.exe (2015-12-10)
    • 12.3.2.35 iTunes for Windows (64-bit) (Windows 7 or later) - iTunes6464Setup.exe (2015-12-10)
    • 12.3.2.35 iTunes for Windows (64-bit-for older video cards) (Windows 7 or later) - iTunes64Setup.exe (2015-12-10)
    • iCloud 5.1.0.34 for Windows (Windows 7 or later) - iCloudSetup.exe (2015-12-07)

    For more tips, see troubleshooting problems with iTunes for updates of Windows .

    TT2

  • Laptop Energy Star - 15r210ne: cannot download and install updates with HPSA

    It is a new old laptop in a few months. HPSA shows that there are many upgrades available, but when I try to update, just HPSA created restore point and connects with the HP servers only. Do not download or installation. As noted other support information, I checked the version HPSA and shows that it is the last (7-6-31-30). I downloaded and installed the updates of the last few months back from other countries before moving on to the India. Y at - it no sectoral implemented is necessary?

    Hello

    Thanks for posting in the Forum from HP Support.

    Have you tried to reinstall the program?

    -Uninstall HP Support Assistant

    -Restart the computer (restart, stop and then restart - just restart)

    -Download and reinstall the software http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt

    You say that the program does not install updates? Error messages?

    Internet connection is present?

    What updates you see are listed for download?

  • After I download and install a form of internet gambling it will not let me play. There is an error message that says the name of games stopped working and his tent to find a solution and you informed when the solution is found.

    After I download and install games since the game first, big fish games and try to read a message box if poster indicating the name of the game has stopped working and that his search for a solution and you inform that a solution is found.  Here are the games I bought on these sites.  Games I buy in stores and install work. Am I missing a driver or something?

    Hi Knbrown,

    Welcome to Microsoft Vista answers Forum!

    Most of the online games use Java and Flash Player. If Java or Flash Player is not updated, you can get this error message.

    I suggest that you install the latest version of Java and Flash Player and make sure if you are able to play, you can see the link to download the latest version and install it by selecting the appropriate operating system:

    http://get.Adobe.com/flashplayer/

    http://www.Java.com/en/download/index.jsp

    If the problem persists, I suggest that you check with the manufacturer of games for assistance, you can check the link: http://bigfishgames.custhelp.com/app/home

    Let me know if it worked.

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update keeps in downloading and installing KB979909, KB982524 KB982168, KB2604829, KB26536352, KB2656369, KB2686828. constantly.

    Windows Update keeps in downloading and installing KB979909, KB982524 KB982168, KB2604829, KB26536352, KB2656369, KB2686828. constantly. I checked the list of installed programs, and they are already installed. How to stop these downloads without stop the automatic updates.

    Regards Terry Hadigate

    Terry,

    See the article after some troubleshooting for your question:

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339/en-us >

    Please let us know if it did or did not help to solve your problem.

    UTC/GMT is 10:59 on Saturday, July 21, 2012

  • is no longer to download and install updates for Windows 7

    I always applied Microsoft "patches" when they were available, including items that were available in may 2016.  I have not installed new software.  I use Norton Internet Security from the beginning of the year 2016, which keep me also.

    More than two weeks now, I tried to download and install the Microsoft "patches" for June 2016.  I sit down and turn with 0% downloaded until I give up.

    I try to download and install the June 2016 'roll-up' (KB3161608).  After doing so, ' Check for updates ' seat and turns until I give up.

    I tried the various "solutions" offered by the "community":

    YES, the date and time are correct

    YES and all two KB947821 KB2509997 were installed when they were offered

    YES, I tried the "Workaround" (run services.msc, remove C:\Windows\SoftwareDistribution, etc.).

    Nothing works!

    Microsoft needs to get this fixed number, as their 'Windows Lifecycle Fact Sheet' CLAIMS that they will provide "extended support" through January 14, 2020.

    The question did you use the Rollup June is the same one that prevents you from installing: looking at a standstill. It is necessary to stop the search by choosing never 'Find updates' and restart. :)

  • Every time I have download and install updates to vista security I have reinstall mozilla firefox, why?

    Whenever I have download and install the vista security updates I lose Mozilla Firefox. The program and the icon still exist but do not respond. By clicking on the icon or clicking on the program files does produce absolutely no response.
    So any time I install updates, I have to run internet explore and firefox redownload. Most annoying. Help.
    P.S. Yes, firefox is my default browser.

    Some problems occurs when your Internet security program has been implemented.
    trust the previous version of Firefox, but not more acknowledges your
    update as being approved. Now how do I solve the problem: to allow
    Firefox to connect to the Internet

    • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
    • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

    Configure the firewall so that Firefox can access the Internet. {web link}

  • After downloading and installing an update of safety about an hour ago, firefox will not start

    After going online this morning, with my firefox browser, a box came say a security update was available and must be downloaded and installed. This has been done without apparent problem. At the end of the update, a note came up saying that the update should come into service after restarting my computer. What I've done. The computer started normally, but after clicking on the firefox icon, the program is not started. My computer is using Windows XP Service Pack 3.

    Hello tncovery, it works when re-download you the full installation file from getfirefox.com and install on top of your current installation?

Maybe you are looking for

  • Re: Qosmio G - hidden files and folders is not displayed

    Hi people, I have a few hidden files and folders, which I was able to access the front and I used to click on the "organize tab" display, advanced settings, display the files and folders to hide or show hidden files. Unfortunately, there seems to be

  • Your model of payment refused

    Your payment model was refused - I got this message when I tried to buy a free app. How to fix? I typed in a correct data of my billing account. Help, please. Thank you in advance.

  • lines of NI8451 output level translator 3.3 to 5V on SPI

    Hi all If I use a NI8451 to talk to my DUT via SPI. I notice that the highest level of SPI tension disc is 3.3V. However, my NI DAQ SPI lines are each connected to a UPS (74HC14) on my HAD and my ups output is given me some odd readings. I think that

  • Brother HL-2140 printer has not passed logo testing for XP

    Use printer Brother HL-2140 for nearly two years without problem. Recently started to receive the message "Printer not passed Windows Logo testing to verify its compatibility with Windows XP Pro." Tried to change the settings through "driver settings

  • You want to send attachments without using skydrive in my hotmail account.

    Original title: I don't want skydrive How to send attachments without them going via skydrive. I just want to send in the form of normal Word or excel documents parts attached as I always did before Skydrive appeared automatically in my hotmail accou