updates to iOS app show filled in the App Store but not apps actually updates

There's something strange happening very recently with the app on my iPhone and iPad updates. Two of them are on the latest version of iOS (9.3.2). Apps would show that they are updated in the App Store, but they are actually not updated. This is the second time that this has happened and I am writing this message I try to solve problems. The first time it happened I had to remove the app and reinstall it. I'm going...

  1. I opened the App Store.
  2. Press update of all.
  3. I saw the download of updates and the finish.
  4. Open the button is appeared next to the application in the list of updates.

The problem:

  1. Applications will not open by typing open the button next to them.
  2. I went to the home screen and the applications in question are darker color.
  3. I typed on these applications and they changed the "Loading"... "which means that they have not actually completed the setting to.
  4. The apps started to download it again.
  5. Applications is is stuck in download.
  6. I turned both devices power off, then turn it back on.
  7. On my iPad: apps started to redownload and completed. Applications are now open.
  8. On my iPhone: applications made "Waiting."... "then"Loading"... "and have not finished downloading.

I'll post this and continue to wait for applications to download. I don't want to remove them and reinstall because they are multiple applications I would you connect again and synchronizes again that I find annoying. I'll try to update this post after the completed download apps, if they end up actually or if I'll end up resettlement.

I posted this at 09:00. It is now 16:45, and only one of the applications is completely downloaded. It is not a problem with the internet, because I can stream movies very well. Another application that has been "updated" this morning went dark. I typed it and it has been "Waiting."... "for 10 minutes now.

Tags: iTunes

Similar Questions

  • VM attached to the data store, but not in the config

    I have a few virtual machines that show that they are attached to a store data, but when you look at the parameters of the client both in the vmx file there is nothing that refers to this data store.  And, to top it off, the data store is just a deposit of file I only download iso files to mount for CD-ROMs.  I have made sure that the iso is not mounted on the machine (of course) and have paid through any other part of the config, but still it shows attached to that store of data, by the customer and by a powercli script.

    When you browse the data store, there is no folders or files on there that refer to this virtual machine.  I have about 10 machines all in this difficult situation.  Any ideas?

    Thank you!

    Hello..

    VM snapshots come with a .iso mounted for them? If so, that would explain it...

    / Rubeck

  • The snapshot files exist on the data store, but not in the Snapshot Manager

    I searched for a question of space on one of our virtual machines throughout the morning.  I finally found that the virtual machine has two snapshot files (total of 120 GB) on the data store.

    http://communities.vmware.com/servlet/JiveServlet/downloadImage/9724/screenshot.1.jpg

    The problem is that these pictures are not in the snapshot

    Manager. How can I get rid of these files from snapshots, recover the 120 GB drive

    space and keep everything in tact?

    Thank you all.

    -Dave Claussen

    [email protected]

    Try to create the new snapshot, and then remove all the...

    vcbMC - 1.0.6 Beta

    Lite vcbMC - 1.0.7

    http://www.no-x.org

  • I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

    recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

    Take a look at this: generic icons | Files camera raw | Adobe Bridge

  • app purchase where the physical store is not present

    I am from Bangladesh and that you wish to purchase an app on the app store, but there is no shop in my country. is there an alternative way for app purchases where the physical store is not present

    TIA

    Mubaswir

    No, the only place to get iOS apps is on the app store (via iTunes on a computer or an App Store app on an iOS device) and you must be in a country to use its iTunes/App store (which is part of the terms of the store) - until if/when Apple open an iTunes store in Bangladesh (we are fellow users we do not know what might happen until Apple announce something) Unfortunately you will not be able to download any content from the iTunes store.

  • How offer you a Mac application that is in the App Store, but not in iTunes?

    I found a Mac application, I want to buy a gift that is only sold on the App Store. Help Apple says we can do through the iTunes Store, but the only version for iOS, not for the Mac. I don't see anyway to gift an app on the App Store, and so for this Mac application, No. way to gift there.

    Any ideas?

    Yes, it has no function of gift in the Mac App Store. You can use the iTunes app to buy a gift certificate e-mail for an amount close to the price of the app. Or you can buy and send an iTunes Gift Card available in many stores the.

    By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

  • I have itunes 12.4.  When I try to add a new song to icloud music library I see the following message: results of genius cannot be updated because the iTunes Store does not recognize your iTunes library. "Then said to turn off genius, no not such optio

    I have itunes 12.4.  When I try to add a new song to icloud music library I see the following message: "Genius results cannot be updated because the iTunes store does not recognize your iTunes library."  He then ordered me to turn off Genius, and then turn it back on.  There is no option.  Othe impossible of access devices correspond to these songs via itunes.  Any help would be appreciated.

    Hello Subocz E M.

    Thank you for using communities of Apple Support. I see that you had problems adding pieces and turn off Genius. I know how it is important to be able to add music to iTunes. I'm happy to help you.

    Since you are being invited to turn off Genius, you can add music, please use the following information to resolve these two issues:

    Turn on or off the Genius

    If iCloud music library is enabled, you cannot disable Genius.

    Choose file > library > Genius (toggle Genius).

    Turning off the Genius Genius Genius Shuffle shuts and and the Genius Mix.

    12 iTunes for Mac: use Shuffle Genius, Genius or Genius Mix playlists

    Have an amazing day!

  • When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

    When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

    Good luck to the project is corrupted.

    Be happy, you have an auto save, even if you've lost some work.

  • Question on showing ani flash on the home page, but not on other pages. Dynamic header?  PHP or Java?

    New to DW CS4 and I redo our clubs to hidefcam.net homepage. Create a template and have built my pages of it.  I would like to show the flash movie and the paragraph which is directly on the home page, but not on the rest of the site as it takes too much real estate.  Are there programs that I can do to make this happen?  My alternative is to lower the animation to the editable area, as seen in the hidefcam.net/test1/index.html

    Thank you

    Jeff

    Use an optional region and set it to default to not show: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7aaba .html.

  • My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

    My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

    I'm going to assume that your iPhone 4 no is not in warranty, otherwise you'd be on the Apple Store, right?  I also assume that you are not interested to pay the service battery $ 79 or $ 199 iPhone 4 warranty exchange for a device that is worth less than $100 (U.S. prices)

    So so let's solve the problems.
    When was the last time it works well?

    An iPhone 4 is old enough, and if it has been inactive for a while, then it is possible to lose load under the level at which it is able to charge the battery.  The battery has a logic board little teeny buried in the packaging of the battery that dictates the charging process.  There is really no energy, the battery doesn't have enough juice to be able to tell itself to charge when the charger is connected.

    If the phone has relatively recently been works well, then start troubleshooting in the charging port.  Is your refill clean?  Try to clean with alcohol to 99% and a q tip.  If that doesn't resolve, then you need more information - there are some ammeters really convenient usb little inexpensive that you can plug into a charger, then the unit and he will tell you exactly how much, if any, current load appliance pulls.  An iPhone 4 with normal charging system should draw on 1 ampere.   If yours is pulling 1 amp and shows still do not display, try to connect to iTunes to see if your device is recognized.  If this is the case, then you need solve a display problem, not a problem of load.

    If your closer 0 amp, then you need to open your phone and troubleshoot the battery and dock connector.    A lot of DIY resources out there for you help with this, just a google search away.

    A trip to an independent repair facility will also help you to go down on the problem.  Pick one that stands out for its work with the great review, great warranty and someone who is willing to look at this iPhone 4 with a no solution = no fee policy.

  • How can I activate on labels in the block diagram, but not on the front panel?

    This question may have been asked before, but searching the Forum did not.

    In LabVIEW 2010, I have 16 indicators of chain on the front panel. I can't have the label for each Visible on the front panel, so I turned it off. But in the block diagram, I need distinguqish one of the other, so I need to make the label (name) visible.

    In the block diagram, if I select indicators Sting all together and go to properties and make the label visible, it makes visible labels on the front but not visible in the block diagram. What good is that?

    How the help of labels (name) of the indicators String visible in the block diagram, but not visible on the front?

    dbaechtel wrote:

    This question may have been asked before, but searching the Forum did not.

    Don't remember already asked this question and get help in this thread?

    Have you tried the things I said in that thread?  How did they not work?

    Right-click on the terminal of BD and make visible > labels.

    It probably will be the FP control show its label as well.  Then go to the FP control, right-click and go to Visible > labels and uncheck the box.

    The terminal of the comics will have a label, and control of the FP will not.

  • The text is visible on the computer screen, but NOT print

    The text is visible on the computer screen, but NOT print

    When I print the document (the header and the footer together can print).

    My printer is Lexmark X 5470.

    Please tell me how to solve this problem.

    Thank you

    Longpo

    Hi Longpo,

    1. what happens when you try to print?

    2. you receive an error message/code?

    Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. Refer to the help article and check if that helps.

    Solve printer problems

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

     

    Solve printer problems

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • diving USB hard drive appears on the Control Panel, but not on MY computer

    Drive hard USB part on the Contrlol Panel but not on my computer.

    Hi Frank,.

    Thanks for posting your query in Microsoft Community.

    If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    (a) what is the brand and model number. the USB HDD?

    (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

    (c) that you get an unrecognized USB device notification error message?

    The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

    in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

    Method 1:

    Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows


    Also, run the next fixit to solve common problems with USB devices.

    Diagnose and automatically fix the Windows USB problems

    If the problem persists, try the following method.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.

    Plug in the removable USB device and perform a test to ensure that the problem is solved

    Also, refer to:

    Updated a hardware driver that is not working properly

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • The data are stored in the DB for the Jdeveloper test, but not in the dev environment

    The data are stored in the DB for the Jdeveloper test, but not in the dev environment

    Hi all,

    IM new with OFA and Im working with Jdeveloper, I create a form to store information using a VO and EO and add information to the current line using the attribute set of function, I noticed that when I lunch the update in the jdevelopher data is OK in the comic book, but when I install the development in the DEV environment the data stored using java code does not the table, only data that are related by the object as text fields and others.

    This is the code that I use for SAP data, it works in jd, but not in the dev environment

    {} public void saveData (String responsabilidadID)
    int respId = Integer.parseInt (responsabilidadID);
    OAViewObject vo = (OAViewObject) getQuiebresComercialesVO1 ();

    vo.getCurrentRow () .setAttribute ("ResponsabilidadId", respId);

    getTransaction () .commit ();
    }

    Any there who encounter this type of problem, something I can check?

    Thank you all.

    Just check if you bounced the server after you deploy the code. Objects Java would not reflect the changes, unless the instance is bounced.

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

Maybe you are looking for

  • relabled the category "unmanaged" inadvertently in bookmarks - cannot rename to unmanaged

    In the Menu bookmark, I accidentally renamed the "unmanaged".file and I can not rename back... I find it weird that if you can change it why can't can not you change back Thank you

  • Drive Blu - Ray Samsung 4 k to 5 k iMac?

    Hello.  Can the iMac 5 k post your 4 k content via an external drive bluray?  I think it's possible, because the bolt of lightning sends and transmits data.  If it won't work, there's a particular reason for this?   Thank you.

  • RN204 not reconnect the USB in the port back after reboot.

    I don't know if that's a problem, but my new RN204 unit will not see my USB stick after reboot. Key, I inserted into the lower back USBport. Port superior return I got UPS. Inverter is connected ok after reboot. If the USB is in front of USB port, un

  • Satellite A30: System busy after returning from standby

    My abrupt A30 Satellite developed a problem when returning from standby mode. The system busy "Hourglass" is constantly and will not die. I have reploaded the power management utility since all options in 'Properties of power Option' are grayed out e

  • Setup.exe does not properly

    I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Contr