Updates Windows 7 fails to configure and restart on log on the computer.

Similar Questions

• "Windows updates were not be properly configured and restoration of changes." The computer freeze

  I have a laptop Dell inspiron 1501 with windows vista on it.

  I don't have the disc of windows Vista DVD you are referring to, I have never recived a Dell I bought the computer on the internet with vista already installed.

  My problem is that, with respect to the windows updates, I get a message saying "Windows have been developed to date not be properly configured and restoration of changes". I have 51 updates pending, 47 of these updates is equivalent to 170 MB.

  As a result of these updates, I think it's the cause of my freezing computer once I have connected and I have to restart only having do not 2 - 3 times.

  When the computer "freezes" the cursor does not move throughout the scene, none of the keys works, including Manager tasks etc., the only thing that works is to turn the computer off. Sometimes, there is a beep, beep once the computer crashes.

  Over 95% the updates I have try have 'no '.

  I'm lost as how to how to repair?

  All good suggestions welcome to solve this problem, the simpler the better... I don't want to have to buy a new computer... If I won't Dell... and I'll have to get the windows disc... most solutions here seem to require it...

  Hi AL0001,

  Run the chkdsk command to check that there are no problems with your hard drive. To run the disk check, follow these steps:

  1. Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.
  2. Select Mode safe mode with command prompt.
  3. At the command prompt, type chkdsk/r (there is a space between the k and /)

  Meanwhile, check the Dell website to see how you can get a recovery disk in case you need to recover Windows.

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• window will stop in less than a minute, stops and restarts everytime I use the computer

  message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

  Hello

  ·        This happens randomly, or when you open any application on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  I suggest you do a clean boot and see if the problem still occurs.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 2:

  It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

  Automate tasks with Task Scheduler

  http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows XP: My hard drive failed in part and I can't access the folder "my documents"...

  Windows XP SP2 from the CACLS
  Windows XP: My hard drive failed in part and I can't access the 'My documents' folder, windows it says ACCESS_DENIED. I tried grant permissions through CACLS and switches appropriate, but I still get messages ACCESS_DENIED. Can someone help me please I have 60 GB of data on it to be recovered. I backup this but is 3 weeks old. Regards Alan

  Hi Malkeleah
  Thanks for the reply, the reader had not failed, but windows had use of the access denied files because I was on a separate computer with a new master drive. Now recovered data and support to the high new outside. Thanks again for your help. Alan

• Update Windows always fail code error "WindowsUpdate_8024402F" appear".

  Update Windows always fail code error "WindowsUpdate_8024402F" appear". Please help me...

  8024402f = you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941>

  UTC/GMT is 17:35 Monday, October 3, 2011

• in windows 7 windows live mail can stop and restart when I try to convey whatever it is

  Windows live mail can stop and restart when I try to convey whatever it is

  Hi 428Tom

  For support with Windows Live Mail, please address your question to the forum Live Support from the link below. Thank you.

  http://windowslivehelp.com/

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Frequently, my computer stops and restarts all am surfing the net? What should I do?

  Frequently, my computer stops and restarts all am surfing the net.  What can I do?

  Hello

  1. what type of internet connection do you use? What is a wired or wireless?

  2. you receive messages or error codes?

  2. did you of recent changes on the system?

  Step 1:

  You can check the following items and check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this

  I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this

  Go to settings > Touch ID and password > disable password.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Date and time resets each time the computer restarts, or stops.

  Date and time resets each time the computer restarts, or stops.

  Date and time resets each time the computer restarts, or stops.

  Re-define at what time?

  If you back up battery is faulty, and when you shut down the computer, the machine doesn't have enough 'juice' to operate. Thus, when you restart it, time will show either bad timing or outright from the date it was setup to the factory.

  TME to check or replace the battery.

  t-4-2

• I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address

  I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address

  Hi Crobadus,

  Yes, this will be fixed in the next update.

  Until then, you can go back to Lightroom 6.1.1 if you need to have the same workflow

  Instructions to restore an earlier version of update

  Kind regards

  Claes