Updates Windows 7, to get codes error '646' and 'dt000 '.
When you try to install the updates, the error code 646 occurs. After the patches recommended and routine brings me to Microsoft with potential charges or here for the real experts. Can anyone help?
Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP
Tags: Windows
Similar Questions
-
I was installing 2 important updates, but I always get this error 646 (KB976321, KB981726) code, pls.help
You can search every download and manually install the same.
IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976321&displaylang=en&stype=s_basic
Save the update to a location on your hard drive, you can find and then install the update from there.
TaurArian [MVP] 2005-2010 - Update Services
-
whenever I try to update windows KB972036 I get the error code 80073712
Impossible to update KB972036 get code error 80073712
See: Error Message When you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
http://support.Microsoft.com/kb/957310 TaurArian [MVP] 2005-2010 - Update Services -
error 646 when windows update, fails to 4 updates. Using vista OS. Help
Hi cjvtex,
Welcome to the Microsoft Answers site!
This problem occurs when the Windows Update Wups2.dll agent file is incorrectly registered in the register. Because registry files that match
to the Wups2.dll file are missing, update facilities are unsuccessful. Follow the steps mentioned below to resolve this issue.Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
1. in Notepad, on the file menu, click Save as.
2. in the file type list, click all files.
3. in the file name box, type register.bat.
4. save the Register.bat file to your desktop.
5 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or confirmation, type
the password or click on continue.6. try to install the updates again.
Access this link to thread for more solutions and ideas to resolve the error 646. It can be very useful for you:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Just bought new HP Pavilion dv6 laptop w / Windows 7 (x 64). Installed Microsoft Office Home & Student 2007 with no problems. Now, every time I sign off - computer same tent 9 implemented to date.
When I go to windows update and try again to install individually - I get repeatedly failed attempt and following error codes:
Code: 646
Code: 80070652.
There are several sites that have downloads for solve the problem - but require Windows Vista operating systems or less - no designated Windows 7. How can I solve this problem?Hello KimSM,
Thank you for using the Microsoft answers Forums.
Solution for error 646:
Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).
Reset the Windows Update components
http://support.Microsoft.com/kb/971058
Restart the computer after the update is installed.
Also check with
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d
http://support.Microsoft.com/kb/822798
That should solve the problem.
Thank you.
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C
-
need help with the code 646 error and unltimat of vista running 64-bit... Let me know what you need to know to help. Thank you...
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Last 6 updates Windows have failed; get the error message 8E5E0147
I had a successful Windows since 4.22.13 update. I tried to manually run these updates, but still get error message 8E5E0147. I have not updated the following text:
KB2820197 - s updated for the stop bit ActiveX
KB2829530 - s updated for Windows 7
KB2830290 - s updated for Windows 7
KB2813956 - update for Windows 7
KB2820331 - update for Windows 7
Another IE 10, I did not and would not run anyway.
I don't know what means the error message 8E5E0147. Help, please!
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
-
I use windows 7.
my windows firewall was disabled. When I click on turn on the firewall, that a message "Action Center can't turn on the firewall".when I try to turn on manually I get an error report that says error code 80070422 0 x ' windows firewall cannot change some of your settings.
can someone please help?
PS.i recently had a virus.
See the thread below for a possible answer:
-
When I try to install KB 2680317, get code error 646
When I try to install the kb 2680317 update I get a 646.I error code am running Windows Vista.Thanks, Ken
Hello
You did changes to the computer before the show?
Please follow the steps from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
-
Error when you try to update Windows 7 64 bit - code error 0x8000FFFF
Been upgraded Windows 7 very well since the purchase, but in the last few days I've met the above error code. I ran through most of the potential solutions (check the registry keys, checking the services running, disable AV software, rename the folder to download etc.), but nothing seems to help. Currently, I'm stuck with Windows 7 could not update from this point.
HI -.
Running "Run the Fix It" in aggressive mode seems to have done the trick. One thing to note - I also disabled Acronis True Image Backup Nonstop, who had run up to this point. If this makes a difference or not, I'm not sure. Whatever it is, the updates seem to work fine now.
Thank you very much
It's very interesting as the How to reset the Windows Update components? page specifically mentions that it is not expected for Windows 7 when I visit with my Windows 7 system:
Advanced System
This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you. Visit the Windows 7 Solution Center
And, applies to , at the bottom of the page, do not include Windows 7.
I have the feeling that the information on this page is incorrect according to the directives of Windows 7, which is not surprising.
That said, it seems that Acronis was the culprit that caused the problem to update.A Acronis True Image Backup Nonstop running during the previous update was successful?
MowGreen Services consumer safety update -
I'm using Windows 7 Ultimate 64 bit and try to create a system image on my 3 TB USB 3.0 Seagate Expansion. A few seconds after the start, the backup fails and displays the message:
The backup failed.
One of the files of backup could not be created. (0x8078002A)
Additional information:
The request could not be performed because of an i/o device error. (0x8007045D)I tried to create a system image to multiple computers, which results in the same error codes. I reformatted the disk and run chkdsk, but to no avail. If anyone has any ideas they would be greatly appreciated.
I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum is frought with for a windows problem reports. I know that I was very impressed when I tried it. Two me are familiar with and like Norton Ghost (which I use for 7 years without the 1st problem) and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com. You can get Ghost for almost nothing (like me), if you look at the sales.
CNET has a lot of reviews of backup program to
http://download.CNET.com/Windows/backup-software/?tag=contentBody;sideBar
.
Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).
Good luck
-
I tried the solution of Micrsoft of manually The on updates, but still nothing.
This is almost certainly due to someone having tampered with the services involved in the WGA process.
Run the MGADiag tool
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response. -
Never had a problem of update until this week.
Tuesday, may 8, 2012 update batch:
KO 2690729
KO 2691905
KO 2604111
KO 2604121
KO 2656405These results in error codes
8004FF01
and
641
Run automated programs fixit, tried unsuccessfully Setup patches. Lost, lost, lost.
Hello
· Are you looking for Services or Msconfig?
· You get a specific message to Windows Installer?
Thanks for the reply, you have tried the troubleshooting steps in the previous answer. If the steps described in the previous post, you can follow the steps mentioned below:
Method 1:
Run the system preparation tool to update from the link and if the problem occurs:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
Method 2:
If the previous step fails run the System File Checker tool to repair corrupt Windows file. Follow the steps in the link:
-
GET THE ERROR 646 ON IMPORTANT UPDATES
I'VE UPGRADED WINDOWS VISTA TO WINDOWS 7 AND DO NOT KNOW IF THIS IS WHY I'M NOT ABLE TO INSTALL IMPORTANT UPDATES, BUT I STILL GET THE ERROR 646 CODE. I RESTARTED THE COMPUTER AND IT ONLY HELPS NOT. SOES, SOMEONE KNOWS WHAT TO DO, IT WILL UPDATE? I APPRECIATE THE HELP.
the KB includes an automated fix 50461 which corrects the problem, look here: http://support.microsoft.com/kb/2258121>
Suggest you download and save the fix it.
Then close all open programs and browsers before running MSFix it 50461.msi.
-
My computer suddenly used to install some updates and I get an error 643 and 646 code, please help?
Error 646 - see: http://support.microsoft.com/kb/2258121
Error 643 - see:
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643Use the above as a guide to resolve the problem.
This allows to check what versions are actually installed-
The user guide for the .NET framework installation check tool
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspxOrder of relocation:
1. the .net framework 3.5, then...
2 .net framework 1.1, then...
3 .net framework 1.1 SP1You can try just as appropriate repair only the versions of .NET Framework concerned.
Downloads for the framework:
http://msdn.Microsoft.com/en-us/netframework/aa569263.aspxTaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
Maybe you are looking for
-
The "alt" tag never appears for the photos! ??
I'm a web designer, and whenever I try to use the alt tag for the images it never appears. "Alt" tag is a part of the HTML languageand that of the written word to make sure that the site visitor will see or understand the content of the photos, even
-
User only appear not on the page, sign in
Thus, it is said that my email was not working on my user/account, so I created a new account and email worked. The point is when I stop and journal on my second account/user is not only my first broken account and the thing of the guest user. I can
-
NB100 - battery discharge so portable stored upright
I just purchased Toshiba NB100 and found following problem - battery discharging nearly 5% in a so portable time stored upright (computer is really off - no waiting, etc.). I tried to find something in the internet to no avail. Someone knows why it h
-
6259 switch digital input to output
Hi all I use the NI PXI-6259. One of the digital inputs I want to switch to digital output, send a serial code and switch again one digital input. Does anyone have experience with this kind of configuration change during execution of the VI program.
-
Automatic indexation shows that partial data
Hello world Please see the attachment. I added notes where the data are reported missing. I know this has something to do with automatic indexing and I spent a bit of time to read about it and try different things, but I really need help now please