Updates Windows has stopped working for months in a row
For the fourth month in a row updates windows has stopped working. When I use windows update troubleshooting get error 0 x 80070005(2016-07-13-T-02_20_41P).
Tried to use windows update reset. I get the message, could not reset windows update due to the failure to stop bits service.
Laptop HP 365
Windows 7 Home premium
I hope not. Unlike the last days of patch, KB3161608 is not an inescapable problem in preinstalling. It is a real solution. :)
Tags: Windows
Similar Questions
-
I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.
This happened to someone else? Is it I can do it fix it?
Hello
Since you get such a serious mistake, I would use the free incident reports.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Original title: Windows Vista 32-bit Edition home
Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.
HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.
Nobody knows what's happening with pc or how that I should do to fix this problem. Any help or advice will be
appreciated.
Thank you
EJ
Hello
1. you remember to make changes to the computer before this problem?
Method 1:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Put your computer in a clean boot state and then check if the problem persists
Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.
-
twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??
I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?
Hi BetheForcia,
Exactly when you receive this error message?
Usually, this can happen due to data execution prevention.
In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.
What are the information in event logs? (Event Viewer)
You can try to add it in the exception for the prevention of execution of data and check that it works.
a. go to Start, Control Panel and click on System.
b. now, click on the Advanced tab, and under performance, click settings.
c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
e. click OK , and then click OK to exitHope the helps of information.
Please post back and we do know.
-
On the computer startup, there is no button or the start task bar. window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working." I could get on the internet, but I have a blank desktop! What should I do? Re-stall the disc? I have a tower HP w / Vista bought in 2008. THX, Lizz
Hello
1. have you made changes on the computer recently?
Method 1.
Let us scan SFC and check that it prevents this error to occur.
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
To do this, follow these steps:
a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
b. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
More information on SFC scan found in this document:
http://support.Microsoft.com/kb/929833
Method 2.
a. also, you can try again user account if the problem is resolved.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountb. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
Fix a corrupted user profile.
http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profileLet us know if that helps. -
iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?
I've recently upgraded to a Windows 10 laptop and have had problems with iCloud. I can't access the photos at all - old hard drive Windows 7 accesses as before, except all my original photos (not Photostream - in folders) seem to have been deleted but it is now downloading Photostream when I activated my new laptop, but only back until June 2015. However, other data seems OK - contacts, calendar, notes, etc.
-
Fax for Windows & scan has stopped working for me.
Fax for Windows & scan has stopped working for me. I analyze the documents on there all the time and it just stopped working gives me an error message indicating "a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner. "However, the problem is not the scanner, because it works with a colleague's computer, and the scanner does not work with mine either. It is a problem with the Windows fax and scan. We have tried several things and nothing works. Help, please!
Hi KristinVeltema,
To resolve this problem, you must download and install windows vista service pack 2 on the computer.
Learn how to install Windows Vista Service Pack 2 (SP2)
See the link below for more information:
Error message when you try to import an image from a scanner by using "Windows Fax and Scan" or by using the Windows Photo Gallery in Windows Vista SP1: "a problem prevented the document under analysis.http://support.Microsoft.com/kb/953253
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING" THIS MSG TO POSTER AT STARUP WINDOWS
"HOST PRECESS FOR"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING"THIS MSG TO POSTER AT STARUP WINDOWS.
WHAT THEN THIS WINDOW WILL STOP APPEARING?
Hi yogesh,
Thank you to contact Microsoft Community and we will be happy to help you with your concern.
According to the description, you get a boot error message.
This problem may occur if there are incorrect settings in Task Scheduler.
Perform the steps mentioned below and see if it helps.
a: Start Task Scheduler type in the search box and click on enter.
b: Expand and go to the Task Scheduler Library -> Microsoft -> Windows -> CARS.
c: Click the View menuand then enable Show hidden tasks (so that a check mark appears next to it).
d: Right click RACTask (Windows 7), and select disable so that the status appears as disabled.
Answer to us if you are having problems with the message error starting or any other issue of Windows, and we would be happy to help you.
Good day!
Hope this information helps.
-
Explorer Windows has stopped working. No solution on the Internet works!
Hello
So, I was faced with the problem of "Windows Explorer has stopped working" for six months. I'm mentally exhausted on the whole issue and I tried each * insert here * vulgar term on Internet solution (no, it does not help to update drivers, run cmd.exe, perform a SFC, install a win7fix and so on.) If there is a solution on the Internet, I tried).
So this time, I'm sure it's Windows Update which caused havoc. But the problem is, I don't know what update. So far, I only deleted KB2691442, as some people have had problems with this material Win Explorer, but it wasn't corruption update. Yes, I said corrupt, since he is clearly interfering with my system!
Now, I hope that some merciful soul out there has an idea of what Windows Update causes this problem. I beg of you! I'm losing my mind and I am really angry and disappointed that no hotfix has been filed for this problem.
Hello
1. you did it any recent hardware or change the software that caused the problem?
2. have you run a virus scan to check if infections are the cause of the problem?
3. When you get the error message?
Method 1: Follow the instructions in the article. This article also applies to Windows 7.
Error message when you log on to Windows Vista: "Windows Explorer has stopped working".
http://support.Microsoft.com/kb/937093
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Refer to this article to optimize its windows for better performance:
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance
Note: The reset and optimize the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Method 3: We use approach 50 / 50 to narrow down the root cause of the problem.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Method 4: Provide details of the event log to find the cause of the problem.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
It will be useful.
-
I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
original title: Windows Vista Ugh.
I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards. Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer. I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer. I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away. Help, please.
Check here the answer to the similar problem:
Tom Ferguson
PS
I've seen many references to Vista but Vista ugh is new to me. ;-)
TF
-
Aero in Windows has stopped working
I am running Windows Vista Home Premium with Service Pack 2. Aero in Windows has stopped working. When this happened once before going to the control panel > change the color scheme and selected Windows Aero, but now this option is not listed. Checked the help and as advised checked my screen resolution and I saw 32-bit color, the verified value Advanced Configuration monitor and I saw this refresh rate is 60 Hz. Then forums got advice to run sfc/scannow and it came back and told me to Resource Protection Windows did not find any breach of integrity. Finally, taking advice to check that the graphics card by going to Device Manager but no device had anything by them which suggests that they do not work.
Help the old windows look terrible after using Windows Aero
Brett
Hello
Make sure that you are logged on as ADMINISTRATOR
My Vista Aero Glass is turned off, how can I enable them again?
http://www.howtogeek.com/HOWTO/Windows-Vista/my-Vista-Aero-Glass-turned-itself-off-how-do-i-enable-it-again/To the need to update or reinstall the video driver (it's a good idea in any case).
Solve problems with Windows Aero
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-AeroHow to enable or disable transparent Aero Glass on Vista
http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html--------------------------------------------------------------------
This utility, it is easy see which versions are loaded: (updated video/Display drivers and others)
According to the needs.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Photo Gallery Windows has stopped working properly
When I try to use the windows laetitia Gallery, it shows a window that says "microsoft windows." Photo Gallery Windows has stopped working properly. then he said: it's the search for solutions, and the solution is always to update windows. When I check my windows updates, it is said that it is up to date. I have an automatic update. This has happened for weeks. I checked for solutions, installed things he told me too, etc, it continues to be every time. I am able to use windows movie maker and media player, but it has happened with the photo gallery.
Here is a solution I found:
(1) Control Panel > Folder Options > view > show hidden folders and files
2) go to: [reader
Letter]: \Users\ [user] \AppData\Local\Microsoft\Windows photo library
(3) delete all content (or back up if you like or at least copy to a folder separate until that you confirm the data is not lost and everything works as it should)
(4) Photo Gallery start WindowsAll files must still be there, and should remain intact, but the problem
should be resoved. It may take a minute or two to rebuild your library.If this does not work go to start / search and type in reports on problems and Solutions, and double click on the program icon that appears. See if he has everything related to this issue.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
patch of active update module has stopped working
Keep is mocrosoft message this patch of active update module has stopped working. Microsoft said it can be fixed by searching online, but the message keeps returning.
Hi Westsiddavy,
A. you are able to install updates?
B. you get an error with the message code?
C. recent changes made on your computer?
Try the following steps.
Step 1: online antivirus scan
Perform an online virus scan to check if your computer is infected.
Step 2: safe mode
Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 3: reset windows update components
Try this step if you found the error during the installation of updates. Open the link and click the fix button.
http://support.Microsoft.com/kb/971058
Previous post: the result.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
My option "open in a new tab in the same window" has stopped working.
After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working. Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option. I did as instructed and concluded that this option under the tabs was already selected and unchanged. I changed this option, closed my browser and restarted my computer as instructed.
As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option. Internet does not take into account my instructions and opens my link in a new window. This is extremely irritating.
Does anyone have a solution?
Hello
What version of Internet Explorer work?
You can try the following steps and check:
Method 1:
You can reset Internet Explorer 9 settings and check
http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Method 2:
How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP
http://support.Microsoft.com/kb/318378
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Important note: ignore in place update from the above mentioned link.
Maybe you are looking for
-
How can I connect through a Web browser?
When I tried to connect to check my mail, I suddenly got an error message stating that I need to connect via a web browser, and since I can't connect. I haven't changed the settings and do not know what is actually wrong.
-
How can I reinstall windows 7 preinstalled on HP Pavilion g6
One of my friends has a HP Pavilion g6 notbook PC that is hopelessly stuck in a loop of "press the ESC key for startup menu '. None of the suggested fixes worked and I can't access the operating system. I want to reload Windows 7 Home Premium and sh
-
HP 15-1039wm: forgot administrator/power on password
I forgot my password on. Deactivation of the system 70795949. Can someone tell me how to get around this?
-
Wireless always orange button - don't know what drivers to install to enable the
Hello- My laptop is HP Pavilion dv7t-6 c 00 CTO Quad Edition Entertainment Notebook PC , I can't ttuns on the wireless button. Tried several drivers but search online but without success. All drivers found that automatically found HP are installed bu
-
Microsoft Register Server has stopped working
I got this pop up after I turn on my laptop. Signature of the problem: Problem event name: APPCRASH Application name: regsvr32.exe Application version: 6.1.7600.16385 Application timestamp: 4a5bca28 Fault Module name: StackHash_19da Fault Module Vers