Updating BIOS for MSI N1996 MS-9613 Indio Motherboard Patch 253 error
So here's my dilemma:
I bought a HP e9270T renovated in 2009. Over time, I upgraded my machine in various ways, a box with a better circulation of air, a new power supply, more RAM, etc. And now, I tried to update my BIOS of motherboard after a recent installation of SSD.
I found the link for the BIOS to latest update here:
http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTy...
It keeps giving me an error saying incorrect patch or something in that sense, the real message can be found here:
http://imgur.com/a/NB4cZ
I had the motherboard model number right the Board of Directors itself.
And apparently, because I forgot to write the serial number on the former stop, HP refuses to answer my question by phone, even though I gave them every bit of information they could possibly need.
I want just a solution to my problem of update,
I hope you all can help
Here are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite e9270t CTO and here's the specifications of its card mother MSI MS-7613 (Indio). This is the software HP & Driver Downloads page for your HP e9270t computer. There is no update of the BIOS for your system.
The reason why you are having problems, install the update to the BIOS, you downloaded it, is because it is one of the several other MS-7613 motherboard which are different. Different motherboards MS-7613 go under the names of Indio, Inverness and Iona. Please note that the BIOS is unique to each of these different Councils.
Tags: HP Desktops
Similar Questions
-
Question about updating BIOS for Satellite 2450-101
Hi, I want to update BIOS for my Satellite 2450-101 (model: PS245E-01TMY-IT). I downloaded the BIOS "bios - 20071008123347.zip" on Toshiba Europe site (see link below). Is this the right one for my PC?
What do you propose to make a backup of the existing before installing the new?I want to make an extension of memory, but I'm not sure whether this is necessary. Do you reccoment to update the bios anyway?
Thank you very much!
Hello!
Yes, it's the good BIOS because it s also for your model (Satellite 2450-101).
A BIOS update is an upgrade of RAM is not necessary. The BIOS has nothing to do with the maximum RAM capacity.
Satellite 2450-101 supports up to 1 GB, type PC2100 DDR - RAM.Good bye
-
Updating BIOS for Sony VAIO PCG-4F1L (VGN-TX650P)
Hello
I can't find the BIOS update for the Sony VAIO PCG-4F1L (VGN-TX650P).
Hello
Yes, update BIOS for VGN-TX650P of computer model is not available for download.
If it is available in the future, you can mark the page below and chek.
VAIO CAre advise for these updates if you are using the original factory installation operating system.
Thank you
Jack -
Updating BIOS for Satellite M100-150
May indicate the reference of BIOS for Satellite M100-150 for Windows XP download, on an official website, I can not download, the reference does not work.
I use the translator so that for the quality of the translation, I don't answer. :)Hello
Here, you need to check if the Bios update is available for your model, otherwise I think that there is not another source to download here.
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
??????. ?????? ?? ??????, ?????? ???? ?????? ? ??????. ????, ?? ???????, ?????? ??? BIOS? ???? ???????????? ? ?????? ????? ???? ????????).
Sorry, guys I have replied in Russian, just want to help him because of the bios
-
Updating BIOS for Satellite Pro S300
Hello
An update of the BIOS for Satellite Pro S300 series, even if there is no change log so there not sure it will set.
Down here at Toshiba
Concerning
Phil
Hello!
Thanks for this info :)
I have never seen anyone from Toshiba but maybe they only read here.
I don't know, sorry.Good bye
-
Updating BIOS for Satellite C55-A-1RG can not be downloaded - 404 not found
I can't download the update of bios for laptop Satellite C55-A-1RG.
I go to http://www.toshiba-greece.com/innovation/jsp/supportMyProduct.do?LNG=28&service=SE and when I click on the link02/12/14
Update the BIOS
Toshiba OS independent 1, 10 - WIN World WideIt shows me
404 not found
NginxNobody knows the correct link because I want to install windows 7, only the laptop for one of my clients and with the bios that have the laptop by default some options (start secure-> disable and start-> start MSC mode) and I can't install windows 7.
If anyone knows of another way to install windows 7, it will be very useful.
+ The message was edited: link has been removed.
Hello
It seems that pilots could be downloaded again.
You should be able to download this BIOS update package:
[BIOS v1.10-VICTORY for Satellite C50-has, Satellite Pro C50-has, Satellite C55-has | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7936 & selSh ortMod = 4433 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 89306 & OS ID =-1 & driverLanguage = 42] -
Updating BIOS for Equium A60-181
Hi, according to the toshiba site there is a new update of the BIOS for my laptop.
I was wondering is it worth the update, unfortunately, there is no information
provided regarding the bugfixes or improvements? Also can I use the
Windows update tool or use the bootable CD, it's just I'm not sure
flashing Windows XP, except if it is a procedure without normal fault?see you soon,
Richard S.
Hi Richard
Richard you have some problems with this device? If everything works properly I don't see a reason any BIOS update.
If you think that the update of the BIOS is necessary, you can try Windows based Bios update but please check the first Description of the Toshiba BIOS update before you continue.
-
Updating BIOS for Satellite Pro 4600
Hello everyone,
I'm trying to update the bios and I followed the instructions, but I don't know what the problem is.
1 - download the files
2 - unzip them filed in a non-bootable disk is.
3 - restart the computer with the disk in.
4 - press f12 during startup.
5 - nothing happened, the system asks me remove the disk, but nothing is updated.Thanks for your help.
Hello
I found this statement to update the Toshiba BIOS for this series of portable:
1 extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding the type of disk to use).
2. make sure that the laptop is plugged into the sector.
3. turn off the laptop.
4. turn on the laptop with the F12 key. Press and hold until a short beep can be heard.
5. the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward"will appear.
6. place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin.
7. When prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart" remove the disk and press the RESET switch (if available) or turn the system off and turn it on again to restart the laptop.But note; Update the BIOS is always risky! If your laptop works ok, then update the BIOS is not really necessary!
Greetings
-
Need update BIOS for Portege 3440CT
I have search on the Toshiba Site for updates to the BIOS for a 3440CT Portege, but couldn't find anything for older models. Are they still available? Also the BIOS of the laptop at the present time is 1.50, CAP, someone tell me what the latest version is?
Thank you
Neil
You must visit the Toshiba driver page:
http://forums.computers.Toshiba-Europe.com-> support download &-> download driversYou will see an upload form.
In order to choose here;-Archives
-Portege Archive
-Portege 3xxx
-Portege 3440Good bye
-
Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b
OK, here's my problem;
I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.
It works well with other computers.
Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...
I hope someone can help me with this.
Thanks in advance...
Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;
Memory:
The computer comes with synchronous dynamic RAM 3 double rate
(DDR3-SDRAM) dual inline memory modules (DIMMS).
DIMM DDR3-SDRAM:
Media memory on the system card can be filled with up to two industry standards
DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
maximum memory support, that you can fill out the card system with up to 4 GB memory
configured in a high-performance dual channel mode.
For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
240 industry standard pins
unbuffered PC3 - 10600 1333 MHz compatible
DIMM DDR3-SDRAM 1.5 volts
DIMM DDR3-SDRAM strips must also:
support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
contain the compulsory particulars of the JEDEC SPD
In addition, the computer supports:
512Mbit, 1Gbit and 2 GB non - ECC memory technology
front and double-sided DIMMs
DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
support
NOTE: The system will not work properly if you install unsupported DIMM modules.The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.
-
I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...
Error code: 3033
"GoTo" label not found
on line 89 of w:\patches\i...ate\windows\installer.wbt
My system is...
Compaq Presario SR1339uk
Serial number: CZB5050HBW
System number: PS267AA
Motherboard: Asus PTGD1 - LA
BIOS version: 3.13 12/14/04
Operating system: Windows XP Home Edition
Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.
Assume that you download SP26760.exe (BIOS 3.28)
Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).
Open a DOS (command prompt). You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.
Once in the BACK, type:
CD FOLDER
go the the directory of temporary files.
Then make a
DIR /S 328.LE ROM
to find the directory where the update files are located. Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)
CD pft467D.tmp
Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches. By omitting the switches can cause other problems, as have reported activation of Windows problems.
AFUWIN /i328. ROM /pbc
For reference, on my system, here's what I saw in these folders:
C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir
Volume in drive C is DRIVE_C
Volume serial number is FE8F-4AA6Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp
26/04/2011 11:11 < DIR >.
26/04/2011 11:11 < DIR >...
24/01/2006 15:31 524 288 328.le rom
01/07/2004 10:54 53 248 AFUWIN.exe
01/07/2004 10:54 amifldrv.sys 6 912
21/02/2006 18:08 526 374 Installer.exe
09/05/2006 17:10 sp26760.rtf 1 784
11/04/2005 10:55 398 696 WBDEG44I. DLL
6 file (s) on 1 511 302 bytes
2 dir 110,361,944,064 bytes freeC:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc
It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do. If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.
For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.
Good luck.!
-DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).
-
Satellite A200 - corrupt 2.40 update BIOS for Vista x 64
Hello
I just downloaded new vista x 64 BIOS for my satellite A200 (PSAE3E) and I can't flash. I had to install four warnings before BIOS updated and 0 problems, but in this version of 2.40 vista x 64 when winplash flash new BIOS stop and there is the trace message:
BIOS update failed, check the image failed. error code 200
I put t know what happened.
Where can I see what is this error 200?
Has anyone installed this new BIOS?Do you use the 64-bit version of Vista?
The mentioned BIOS is only compatible for portable computers with Windows Vista! (64-bit)
-
Can't find an updated BIOS for Satellite A30
Hi friends.
I'm not found Toshiba A30-203 a new BIOS update.
I want to install windows vista but this sccren error.
Error message:
"A computer has been detected and windows has shut down to prevent damage to your computer.If this is the first time you2ve seen this Stop error screen restart your computer. If this screen appears again, follow these steps:
The BIOS in this system is not fully ACPI-compatible. Please contact your system provider for an updated BIOS. »
to apologize for my bad English.
Hello
It seems that the Satellite A30 series is a series that was shipped with the BIOS to no support for Vista.
I think that it should be possible to install Vista after a update of the BIOS.But know that you will ask for the new version of the BIOS. Am I wrong? ;)
Well, on the page of the Toshiba BIOS, you should find different versions of BIOS.
It is very important that you check the more info option you will resume the BIOS updated. You will find information on the compatibility of the BIOS (not every version is compatible with all units).But as you know that Vista is not official on the market. As I remember, it should be possible to buy the operating system in January 2007.
I think Toshiba will present a new version of BIOS for Vista in next time. So I hope ;) -
Impossible to update BIOS for Satellite M40 - 135 - bios is not ACPI
I had problems with the upgrade of the Bios on my laptop.
I can't install windows xp before JC.
I got BSOD "the BIOS in this system is not fully ACPI-compatible.Yes, I tried F7 and nothing helped! The bios only I found here is 1, 70 - WIN and that only works on windows. So I can't install also what I did I install windows 98 on it and my system is in place but I tried to install the Bios, I got error. So I can't start it to update.
On this forum I saw it there has updated trad 1.70 if toshiba support team can send it to me on the email address so I could update the bios my bios is 1.0!
Thanks in advance for any help!
Hello
First team Toshiba is not here in the forum user to.
Secondly it can update BIOS victory only running Windows OS-based, it would be best that the use of the Toshiba preinstalled version of Windows in order to run the BIOS update.By the way; I found versions of BIOS Toshiba U.S. on page here, you can download the traditional BIOS which can be updated using the diskette.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Notes; Toshiba laptops, US have different model numbers. -
Cannot update Bios for Satellite U400 - 134 Vista 64-bit
When I try to update Bios 3.50 courses it is said that I couldn't have an administrator rights, but I run it under administarator.
Who knows about this problem?
Post edited by: Gerus
Hello!
Satellite U400 BIOS 2.0.17.64?
As far as I know the latest version of the BIOS for Satellite U400-134, which belongs to the PSU40E series is the version 3.50.
Check again on the Toshiba site: http://eu.computers.toshiba-europe.comIf you download the zip file, you should extract all files before you start the update.
Good bye
Maybe you are looking for
-
Location of the icons of storage?
I wonder where in the filesystem, the icons for the disks are stored, including one below, for removable drives. Could someone point me in the right direction?
-
How can I remove app Mega backup of my desktop computer. He got installed when I thought I was downloading an update for adobe flash. I closed the application them tp mpved ot trash, but he would not accept it stating still open app.
-
The ID I used before is is longer in service, how can I change to a new ID if I know the old ID and the old password?
-
VESA compatible monitors?
I really have a problem to know which monitors Acer have patterns VESA (75 mm or 100 mm). I spilled by sheets, but this information does not appear to be there. Does anyone know how to find out which models are compatible VESA and which are not? If n
-
Problems with download blackBerry Smartphones
I have a problem with my bb 8520, whenever I try to download from the internet, it say failed download and stop the process, I tried to restart as many times as I can, but nothing works, please help!