UPGRADATION OF 8 TO 8.1 AND ERROR 0XC000000F
I have DELL Inspiron 7535 with windows pre installed 8 and no cd drive. After downloading win 8.1 on auto, during the up-gradation, boot error 0xc000000f alarm persists. Advice any solution.
Hello
Please see following fix and if she could help you:
Hope this helps, good luck :)
Tags: Windows
Similar Questions
-
Satellite L300 and error 0xc000000f
I had the windows did not start error. A recent hardware or software...
Say that you need to repair Windows installation disc.
File: \windows\system32\winload.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or damaged.
Enter = continue
ESC = exitI can't start mode without failure or something like that. I have not upload anything recently or change anything. Just tried to start one day and got it. I have only the option of F2 or F12
OK, so I used my restore disc and went through "windows is loading files" up to the end of and then Microsoft corporation. It is not even asking for the language. Then nothing. Black screen with white cursor. Nothing helps. The cursor moves when controlled with mouse pad, but that's all. I can't use ctrl + alt + del or something else to get out. Please can someone help me with this. I have some documents that I'd rather not see it go. Are there other options apart from resetting to the factory settings?
Thanks in advance for your help.> Are there other options apart from resetting to the factory settings?
If I've understood your right to post you cannot install recovery image.
What happens when you press F8 at startup? You can enter advanced startup options?If you have some important documents stored on the HARD drive and then connect as another external to the other PC then you can all copy them to the PC.
What you can do?
Try to get somewhere Microsoft installation disc to see if the same problem occurs again. If you will not be able to launch the installation of operating system with this disc of facilities I assume that HDD is troublemaker and you must test the features with the other.Maybe some friend of you has a 2.5 HDD so you can use it for testing purposes.
In the end, I have to say that most strange thing in this whole thing, is that you cannot use same disc of recovery for the installation of the OS. For me it is the best proof that there must be some hardware problem.
-
my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt.
Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
Reset
See if that solves the problem.
If not, run the update http://support.microsoft.com/kb/947821system tool >
02:42:25 amUTC 23/08/11
-
Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017
Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017
error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).
The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.
Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)
Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.
Maybe some interviews, try to run the "chkdsk/r" command at the command prompt
Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.
How to run Checkdisk at startup CHKDSK
http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>
Run SFC/scannow
File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.
WHY: You want to ensure that the base operating system files have not been damaged or changed.
How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow
http://www.Vistax64.com/tutorials/66978-system-files.html>
04/01 / 1107:15: 20:00
-
Upgrade of windows code 7-10 and got the error 0 x 20000...
I tried to upgrade to windows 7 to 10 and got the error code 0 x 20000... What is - this and can I fix it?
Read that it can be a possible solution:
J W Stuart: http://www.pagestart.com
-
I am trying to open, fill out, and print a PDF from a reliable source. I updated Adobe Reader DC but continue to get an error message indicating that I have to "Upgrade". I used Google Chrome and Internet Explorer.
I have it!
PDF on Mozilla Firefox and Google Chrome XFA forms
Changed the setting in Firefox and it works. Thank God.
-
I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the following message and there's like this. I tried to cancel the disk check with in 10 seconds by pressing a key, but it still is not.
Message:
"Checking file system on C:.
The type of the file system is NTFS.
One of your disks needs to be checked for consistency. You can cancel the disk check, but it is highly cool that you continue.
To check the disk a press any in 10 second (s). »How your problem is related to Windows Update (compared to the Windows upgrade)?
This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Portege R830-10 q - Win 10 upgrade - error 0xc000000f
I have a Toshiba Portege R830-10 q I'm trying to put Windows 7 upgraded to Windows 10.
When upgrading, he stumbles and goes into a loop of repair to 29% which gives me error 0xc000000f with no way to roll back.
A clean installation, installs absolutely perfect, but due to rules of activation of Microsoft (possible only via an update unless you buy the product), it is no good.
Has anyone managed to upgrade the q R830-10 Windows 10 yet?
I know that's not on the list of approved of the PC Toshiba, but surely there must be a way
I also have this problem, anyone can give us advice how to fix this
Thank you.Jonathan
-
What I can do about it:
After the upgrade to firefox 6, I get this error.
When I click to open Firefox, a box opens with the following error message:
JAVASCRIPT application
TypeError: Components.classes['@ [cid] is undefined?
When I click close in the box, then Firefox start. I just want to really get fixed error so that when I open firefox, I can't see this box.You need to understand what add-on is causing that error and disable it until the developer of this add-on fixes it. There may be an error on this issue in the Console error, accessible through the developer menu item Web or {Ctrl + Maj + J}.
See also this:
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes -
Hello.
I hope there, can someone help me!
I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.
I use Protection Premium Bullguard and Acronis True Image installed.
I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.
When I run the upgrade from a DVD burned ISO, it gets 37% and fails.
Hope you can help. (fingers crossed!)
Chris
The Setup error log file shows:
2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:49, error CONX failed to initialize the data of net class 800700052015-08-05 16:48:50, CONX error could not get data from the printer class 80070057
2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002
2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]
2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002
2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]
2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002
2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]
2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002
2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]
2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216I have now abandoned and rebuilt my laptop using the recovery partition. The upgrade to Windows 10 came immediately, and it installed fine.
Hooray
-
I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?
Hi KevinRy,
Welcome to the Microsoft Answers site!
Unplug all external devices.
Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.
Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:
1.
Right-click my computerand then click Properties.
2.
Click the Advanced tab.
3.
Under Startup and recovery, click settings to open the Startup and recovery dialog box.
4.
Clear the automatically restart check box, and then click OK many times necessary.
5.
Restart your computer so that the settings take effect.
Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.
Please reply back with the error message you get because it helps us to resolve the error.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
The upgrade from Vista to Windows 7
I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?Have you tried to do an upgrade installation or a custom installation? A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new. If an update install does not install work, you need to do a custom.
In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista. Vista upgrade requires a detail, a copy in the Windows 7 box.
-
Upgrade Windows 7 (64) Windows 10 getting error 8007002C - 400 d
I have a desktop HP Pavilion p6-2123 PC. I tried to upgrade to Windows 7 with Windows 10. Windows 10 downloads and starts to install and access over 80% and it will stop and reload old Windows 7, and I get error 8007002C - 4000D. I tried the suggestions that are on the windows. When reloading Windows 7 there are some updates that "did not day", some of which are "important." One of the suggestions has been updated of KB3112343 who made the update.
Check out first:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
try to upgrade manually:
Option 1:
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
Option 2:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Windows Upgrade Advisor has encountered a problem and needs to close
I installed the Upgrade Advisor, and he moved very well. When I try to launch it, I get "Windows Upgrade Advisor has encountered a problem and needs to close. We are sorry for the inconvenience. I commend the report to Microsoft, and it tells me nothing else.
Here is the signature of the error dialog box. I can send the contents of the error report if that would help (it is big).
EventType: clr20r3 P1: windowsupgradeadvisor.exe P2: 2.0.1125.0
P3: 49 Feb 699 P4: mscorlib P5: 2.0.0.0 P6: 492b834a P7: 20a 2
P8: 7 P9: n3ctrye2kn3c34sgl4zqyrbfte4m13nbI'm running a core i7 940, Windows XP SP3. The Advisor works fine on my laptop (Windows XP SP3).
The other questions here on this topic seem to go unanswered... then maybe it's not an answer.
Can anyone provide any assistance would be appreciated!
Thank you!
If you run anti-virus, turn it off during the race.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
Could not be started due to error 3 and error 9 MyApplication
I installed Tablet OS 2.0.0.7111 to test my application (any application) and when I try to start it, it stops and shows a notification with the error message "Cannot start the Application due to the error 9".
Update
I just rebooted and now all applications are normally except mine. Mine tries to start, but then comes out quickly and unfortunately with no error message or of any kind of notification.
History of the steps
Received a link to this Web page via email https://bdsc.webapps.blackberry.com/native/beta/register/
Followed the steps to upgrade to 2.0 Tablet and restarted
Upgrade succeeded
Went to my 1.0.0 compatible app and tried to run it
He opened, showed a white screen for about 5 to 10 seconds, then came out. Tested again several times with the same results.
Open App World and App World has shown a notification for an upgrade to version 2.0 compatible to my application.
Installed the application successfully
On the home screen found my application icon and tried to run it.
It seems the solution to the error 9 and error 3 was a reboot.
The cause of why my application was released quickly had with a StageWebView setting in a local file in the view Initialize event. It can be caused by trying to access or create a file too early or to try to load the webview content too early.
The solution was to wait for the creationComplete of the view.
Note: It worked previously so something has changed in 2.0. Test your applications.
Maybe you are looking for
-
I use the latest version
-
Satellite L630-15U - block during the use of the
I have a L630-15U Windows 7 Professional 64 bit, when I use in battery mode after a few minutes it crashes often. Everything has been frozen, I need to turn it off.
-
CATALYST 5.6 and Mobility Radeon 9000 on Sat A75 S229
Hi allI have the satellite A75 S229 with graphics ATI Mobility Radeon 9000 with WIN XPI'm trying to install a new driver for this video card I downloaded from the site from ATI (CATALYST 5.6 Windows XP), but I get an error:The INF errorVideo driver n
-
DVD player not working not not on Sat 1800-614
Hello I bought a Satellite 1800 614 3 years ago, provided with a DVD player. At this time there is no problem to read the DVD. I did not use it for a while and when I tried to use it I discovered that it does not read new DVD, I can see the movie but
-
Impossible to verify updates errors updated Code 80072EFD
In my status bar is the icon for updates are ready well that says mine can not check for updates when I try its control of cant say for updates error Code 80072EFD I tried adding sites to the lists of exceptions and nothing works someone can help me