Upgrade HP Pavilion P6000 series

Similar Questions

• HP Pavilion P6000 series (MN: p6710cs-m)

  Hi guys

  I have some problems with this desktop computer. This PC is 1.5 years. I bought an external graphics (GV-R725O5-2gi), but the new GC will not work. I ran the card on an old PC of 5 year with maybe end of 1 PCIe slot that it runs. I have suspected that the card is broken. Stock of 300W power supply, I changed to new 450W. Next step was instalation of the HW on the motherboard, then turn on the PC. This card has no external power supply. The fan on the card works. The PC does not beep ani signals but the screan is black and the PC is no W7 boot. I also have an old (Inno3d GF 7300GS) card for testing. I don't know what interface PCIe gen is the GF 7300 GS but the amd's PCIe Gen 3. The PC works and the start-up of W7 with the GF 7300 GS. I chcked the BIOS for Setup, but it is bad for the config. I turn off power save mode or something like that enable this opt: pic.  My first idea was compatibility question maybe update BIOS version. But when the GF 7300 GS runs that the BIOS is not the problem I think. It is possible that I have to upgrade the BIOS? my version of the bios (2.10.1206) and the site of product extra have a new version (7.15 A Rev. 3.02 M).  Slot PCIe on the PC is 16 X, but the card is only 8 X I have search for PCIe compatibility issues, but CESP 1 standard to the most recent must be compatible. In some cases the PCIe 1 may have some problems. You can put a 3 PCIe Card in a PCIe 2 motherboard and it wil run. Here is the motherboard spec. I think that this configuration should work but I don't know where is the problem. I don't know what to do.  I also read a coment in this forum that the older generation of AMD cards worked well on HP Pavilion P6000 serias. Can you help me???

  PEAK.

  

  Thanks, Ervin

  Based on specifications, your HP p6710cs is four years old and has a PCIe Gen 2.0 x 16 slot. The card you are trying to use is that GEN 3.0 PCIe may require a mother UEFI based that supports a certain level of specification. Please try to older pre-R7/R9 map as the HD 6000 / 7000 series.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Pavilion p6000 series p6633w: processor hp upgrade p6633w

  I want to upgrade my cpu (processor) to a tri-core or quad-core, I found the list under proiduct specs for compatible socket AM3 processors.  My BIOS will support the processor upgrade?  BIOS version 6.02, date 21/07/10 by American Megatrends, Inc..

  Gordon, welcome to the forum.

  Here are the processors that have been fully tested to ensure they will work with the motherboard:

  • Max TDP: 95W

• Pavilion p6000 series p6633w: power supply upgrade

  Is the format of p6633w and atx pavilion for the power supply compatible, I couldn't find a HP 400w PSU.  They offer a?  The power supply I found is in atx format.

  Thank you for the additional information.

  The power supply unit (PSU) is a standard ATX.  You can use any brand.  As a precaution, I suggest to measure the PSU existing and comparing measures to whichever you choose.  I love Corsair products.  In addition, a modular power supply is good for cases of average size.  You can only use the cables needed to allow better air circulation in the case.  I recommend at least 500W.  This will allow more power over the maximum use.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion P6000 series: Advice on upgrades, if any?

  I have the desktop p6740f with AMD Phenom II 955 Quad processor, 8 GB DDR3, 1.5 TB hard drive memory. There the motherboard N-Alvorix-RS880-formfat (Alvorix). ATI Radeon HD 4200 graphics. IM an avid player and unfortunetly my gaming PC went into a deep sleep, never to recover. It was my daily life anyone can use computer. Now its my only source. My question is, are there things I can do to upgrade this thing to run say, WoW smoothly? Or do I just start from scratch with a completely new system. Do not forget that I am not not looking for a machine mega as if I had. I just want to be able to play without lag even issues with the graphics set on low.

  @lasvegaswireman already told you a new power supply with a GPU card decent.

  As you WIN 7, the BIOS rev max is 7.16 (related to the operating system).  I did a quick support on the HD 4850. It is out of stock. This means that the MSI GTX 750Ti is an excellent choice because it has a legacy and UEFI micro-switch.  You need the legacy support.  MSI GTX 750Ti Newegg shows a 400W PSU.  NewEgg has these two elements.

  Corsair 430W MSI GTX 750Ti   

• Pavilion p6000 series p6633w: upgrade of the power supply

  It also seems that the fan is on top of the PSU, so when installing, I need to done deal inside the Tower fan?

  It can be installed in any event.  However, the most common way is confronted in the case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP pavilion p6000 series model p6805w windows7

  PC won't start not closed down my hp Pavilion series 6ooo & the pc recover not. the lower left corner of the motherboard has a flashing green light, I also think that the battery poped when I tried to restart

  Cluney,

  The HP p6805w is a desktop unit.  What is the status of the power supply? Please see here step 2 as the computer does not illuminate.

• HP Pavilion p6000 series: p6719c

  I want to upgrade the system motherboard to increase my system memory, currenty 4 GB.

  I believe that my processor is fine (AMD Phenom II X 4 840 T processor).

  I use this computer to the production base and light music and use my own card external sound.  So far, for how use this count, it works fine.  I just need of more memory.

  I am told that the motherboard on this computer cannot handle more than 4 GB.  So I'm trying to find an upgrade compatible which will not require new fan or hard disk, or processor, power supply, which will allow me to add more ram.

  Thank you for all the suggestions that happen.

  Hello

  Its specifications:

  Memory upgrade information

  • Dual channel memory architecture

• Omstart av HP pavilion p6000 series

  JAG behover hur man starta om PC som den var NY nar tips. Har en en 'Reperationsskiva Windows 7' backupp skivar. Finns in wireless start-up/sdi-thread = 3096 KB + wire-WIM-start = Ko 365341.

  Gor Hur man?

  debt 42

  dette42 wrote:
  

  Hej.

  AR ATT forsoka fabriksaterstallning till datorn SKICK SOM Ficks even Nars.  D: / "Recovery" Jag kommer in i den ej Finns. AR fabriksaterstalle of man here?

  Is to try to factory reset the Samma state that when you computer Fick. D: / "Recovery", I'm not in it. AR here this new man factory place?

  For att utfora in fabriksaterstallning Maste upprepade Ganger trycka pa tangents F11 vid uppstart av datorn att det kommer your dig until Recovery Manager, Saitek bara instruktionerna for att datorn aterstalla. The har nar fick datorn om behovs sa aterstallningsskivor?

  To perform a factory restore you repeatedly click the F11 key when the computer starts, it will bring you to the Recovery Manager, simply follow the instructions to restore your computer.

  You did it recovery disks when you got the computer if need be?

• Need new processor for Hp Pavilion p6000 series

  Hey everyone I broke one of the most important commandments of the computer world.
  "You won't be bending your pins of the processor.
  
  Well Yes, I bent and broken irreparably pins at the bottom of my CPU and now I need a new. I cannot know what is and is not compatible with my motherboard however. For the most part cause I can't find out what motherboard I have. Any help would be greatly apprciated

  The link is here. Max is 125W TDP and 'NO' Black Edition CPU.

• Pavilion p6000 series p6633w: video card

  I know that my system has a pci 2.0 x 16 slot, is the 3.0 pci card work?  Sapphire Radeon R7 240 2 GB DDR3 HDMI/DVI-D/VGA with Boost PCI-Express-11216-00 - 20G graphics card

  Video PCI Express 3.0 x 16 cards retro-compatible with PCI Express 2.0.  However, I am not sure the card you want to buy will work on your computer if it requires UEFI in the isntead of a (standard) the legacy BIOS motherboard.  HP didn't start using UEFI until mid_October 2012.  I believe that you have already updated the PSU power SUPPLY or intend to update.  I suggest that you contact Sapphire Support in order to ensure that it will work.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion p6000 series: Microsoft word open used

  I'm not able to open microsoft word. Whenever I try to open it, it says: "starting Microsoft word 2010 can not be opened. Try again or repair the product in the control panel. »

  Please help I need quick fix.

  Hello:

  Try reinstalling Office Starter 2010 using the file I compressed upwards and attached below (under the attachments).

  Download, unzip, and double-click on the file to run it.

  You must be connected to the internet so that the Setup file to communicate with the Microsoft Office Starter 2010 download site.

• Pavilion p6000: upgrading Pavilion p6000

  Hi, I just got the Pavilion p6000 on ebay for around $ 200 and I want to change the graphics card and possibly add more ram. So I would like to know if it is correct to what I intend to do.

  There is some information about the computer that I know:

  : HP Pavilion p6000 series

  Product number: BT493AA #ABC

  Motherboard: N-Alvorix-RS880-formfat (Alvorix)

  RAM: 4096Mb non ecc

  Processor: AMD Athlon (TM) II X 3 445 CPU (CPU 3), ~3.1GHz

  Graphics card: ATI Radeon HD 4200 (1916 MB)

  I would like to know if I could use a Nvidia GTX 980 graphics card and what is the maximum RAM (ram) the motherboard can support on a 64 bit system.

  Thanks in advance.

  Hello

  You can search the forum "Alvorix" and see what has been already stated.

• HP pavilion p6000: memory upgrade

  Have a Pavilion p6000, SN MXX0490MHH, product # BT543AA #ABA.  Provided 4 x 2 GB with 8 GB of ram installed on the chips.  Operating system is Windows 8.1.  Upgrade to 16 GB and bought 4 x 4 GB DDR3 1333 MHz, DIMM parts.  Does not seem to accept the new memory.  Question: Is this good memory, and this system will support 16 GB.

  Hello

  Explain what "is not except" means. Windows is not except the new memory or the BIOS does not recognize the memory or the PC does not start with the new memory?

  We cannot answer your question, given the information you have posted.  You can certainly search the forum for others who may or may not have success the upgrade of your particular PC model to 16 GB.

  Try to clear the CMOS memory. If this does not solve the problem then test each one dimm at a time.  Don't forget, with the former PC HP DIMMs need to be a game.

  Try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  Memtest86 4.20 more Installer USB.  Test each dimm one at a time then as a complete set.

• Upgrade to blu - ray for HP Pavilion g series?

  Hello

  I am interested in buying a reader external blu - ray or update material on blu - ray for my HP Pavilion g series. This is the info I found on this laptop I have: apparently, it is a series of Notebook HP Pavilion g6-1300. That's all I know using my product number.

  I'd like to be able to play blu - ray, but I don't know how to to this topic or what would work for me. Can anyone give me any help? I'm also in the United Kingdom, so I don't know if this would affect any help.

  Thank you.

  Hello:

  Here is the link to the service manual for your g6.

  http://h10032.www1.HP.com/CTG/manual/c03094322.PDF

  Chapter 3, page 28 provides the disc of Blue Ray supported with HP part number.

  You can query your research for the part by the part number... Try eBay.

  The part is no longer available at HP, so you find a place that they may have to sell.