upgrade memory dv6t-7000

Similar Questions

• upgrade memory dv6t-2300

  I plan to increase the amount of RAM in my laptop HP dv6t, which currently has 4 GB installed.  My questions are:

  • What is the maximum capacity of this system?
  • What is the best type (faster?) (no brand) memory to this system?
  • Any thoughts on how much of a performance gain, I can wait for the upgrade?

  Thank you.

  Hello

  1. in its Manual:

  Housing for memory 2 customer accessible/upgradable memory
  Supports memory dual-channel PC3, front side bus to 1 066 MHz (FSB), DDR3
  Supports up to 8 GB of RAM in the following configurations:
  ■ System total 8192 MB memory (4096 MB x 2, dual-channel)
  ■ system memory total 6144 MB (2048 MB × 1 + 4096 MB × 1)
  ■ total system memory of 4096 MB (2048 × 2, both channels)
  ■ total system memory of 3072 MB (2048 × 1024)
  ■ total system memory of 2048 MB (1024 × 2, both channels)
  ■ total system memory of 2048 MB (2 048 × 1).
  ■ total system memory to 1024 MB (1024 × 1).

  2. This is not the case, you can run speed ful race cars on normal streets

  3. from 1 GB to 2 GB is a big change, 2 GB to 4 GB is a small change, from 4 GB to 8 GB not much except for some applications such as Photoshop

  Kind regards.

• HP Pavilion dv6t-7000 - Ralink RT5390 Wireless Upgrade

  Hello

  I'm looking forward to replace my wireless card, I noticed a stamp on my wireless card informing me that I have to replace with HP SPARE, I scanned the bar code "670691-001" and I found that it is the WiFi card Ralink RT5390... can I replace it with the wireless card intel 7260HMW? If not, what other wireless cards my camera supports? 4.0 taken Bluetooth supported if possible.

  Thanks in advance for your answer

  Best regards

  mabusair

  HP Pavilion dv6t-7000 CTO Entertainment Notebook PC - Windows 8.1

  I7-3610QM, 8 GB of RAM

  Hi mabusair,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you are looking to replace card Ralink WiFi. Page 52 of Maintenance and Service Guide will show you compatible wireless, the 7260HMW of Intel cards but there are two others with Bluetooth 4.0 support.

  Thank you

• Pavilion dv6t-7000 QE: upgrade factory ssd for the four edition dv6t-7000

  I have a laptop DV6T - 7000 CTO Quad Edition, 64-bit Windows 7, I had configured with a 160 GB SSD from the factory.  It works great, very fast, but I want to move to a larger ssd. In looking at a crucial or sandisk pro now, 480 GB or more.

  My question: if I use the cloning software that will copy everything to the new ssd, included windows operating system?

  I really want to do a complete reinstallation of the operating system that I don't see the need for it. Most likely I will modernize in any case next year to win 10, or whatever they called.

  Somehow this update seems easy enough to do, but I want to anticipate any potential isses before we start.

  What do you think? This who should I look for? If there is a problem, can I pop just my current ssd right in?

  Thank you

  Yes he clones above. Choose a proportional resizing of partitions. And Yes, if the clone does not work, you can always pop concert the 160 original. I use Acronis True Image Home 2014 for cloning and it works fine. Some versions of the Samsung 840 and 850 equipped with a migration kit which has the SATA Adapter USB and a CD containing software for disk cloning.

  You can also buy a separate kit:

  http://www.crucial.com/USA/en/ctssdinstallac

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP PAVILION DV6T-7000 (A5F76AV)... Display and keyboard

  Hello

  The screen of my laptop [HP PAVILION DV6T - 7000 (A5F76AV)] is not good vewing angles, he shattered a lot. Is it possible to update the screen? I think it's a type stantard of HD with a resolution of 1366 x 768 px, and hopefully upgrade to a WUXGA anti glare screen with resolution 1920 x 1200 or 1080 px.

  I checked hp'partsurfer and I guess that's what I was looking for: (682068-001SPS-DSPLY HU 15.6 FHD AG ALU DSC)

  I am currently in Saudi Arabia. Please can you me if the display can be updated here?

  Apart from that the keyboard has a backlight. Can I set the keyboard to a backlit keyboard?

  Thank you.

  Hello Ryan-7,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that you are looking to upgrade your screen and keyboard. I'll give you the best information I can to help you! As a reference, I'll give you this product maintenance and care guide.

  Here are all the views available for this laptop, with a description:

  the display Assembly 15.6 inches

  For use on all computer models:

  display block 15.6 inches, glare, FHD aluminium finish: 682066-001

  15.6-inch BrightView HD display, aluminum finishing block: 682065-001

  For use only with the computer models equipped with an Intel processor:

  15.6-inch, non-glare, FHD display Assembly in aluminium finish (to be used on computer

  models equipped with a graphics subsystem with discrete memory): 682068-001

  15.6-inch, non-glare, FHD display Assembly in magenta finish (to be used on computer

  models equipped with a graphics subsystem with discrete memory): 685985-001

  display block 15.6 inches, glare, FHD in magenta finish: 685983-001

  15.6-inch BrightView HD display, aluminum finishing block (to be used on computer

  models equipped with a graphics subsystem with discrete memory): 682067-001

  15.6-inch, BrightView, HD displays Assembly in magenta (to be used on computer finishing

  models equipped with a graphics subsystem with discrete memory): 685984-001

  15.6-inch BrightView HD, display the Assembly in magenta finish: 685982-001

  Here are all the available keyboards that are backlit:

  Keyboard with backlight (including backlight cable):

  For use on all computer models to the United States: 682081-001

  To be used on the computer models equipped with an Intel in Saudi Arabia: 682081-171

  To be used on the computer models equipped with an Intel in Belgium: 682081-A41

  To be used on the models of computer with an Intel processor in the Netherlands: 682081-B31

  One bold is the one that is available in your area, to make it easier for you. To order the part, simply call HP.

  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

  Mario

• Key Action WiFi does NOT work on Pavilion DV6t-7000

  I just got a new Pavilion DV6t-7000 Quad Edition laptop, and the first thing I did after I boot the system was to upgrade the operating system.  I have an MSDN subscription, so I've upgraded to Windows 8 Pro (RTM).  Everything is great... except for the WiFi button.  It does simply not to turn on or turn off the WiFi connection.

  It always shows a white LED while the WiFi is on, and pressing the button does nothing.  Other action keys may work... the brightness, mute audio, etc.  If I disable the WiFi in the network Panel, then the light turns red.  As if she recognizes the WiFi it's takes no action to actually turn on or turn it off.

  I updated the BIOS to the latest version, by the site of HP support for the 64 bit of Windows 8 OS, and I checked in the BIOS action keys are enabled.

  Can someone help me get this to work?

  Thank you!

  -Andrew

  Have you tested it before loading Windows 8 on it?
  
  Support of thing going before interview, that Windows 8 drivers are available or not, is to perform a recovery to the original embedded operating system.
  
  If it is a fault, the question would be present in the original Windows 7 operating system as well. I suspect that this is largely a software/driver problem.
  
  Also, I recommend the update to the BIOS before installing Windows 8. Windows 8 installations work differently with the BIOS that previous versions of Windows, so the end result would be different to reinstall Windows 8 from the version of the BIOS is different this time.
  
  However, I recommend he get back to Windows 7 in order to ensure all features is present.
  
  I know you probably don't want to go back in the recovery efforts there to Windows 7 and then put 8 on.
  
  By chance, you did the recovery disks for your system first? If this is not the case, they must be ordered from HP. You can try to use the Recovery Manager to create, but I don't know if it will work since the operating system has been modified.
  
  In all cases, whether it works or not with the original software, she shipped will help determine if it is a defect or not. More than likely, it is not and is only a matter of unfortunate compatibility with Windows 8.

• Upgrade memory on an all in a single LX830

  I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

  Well, mainly upgrade memory depends on the support of the chipset/CPU.

  Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

  A property used by a 4 GB RAM module and housing is free.
  This is why it must be able to use another additional module of 8 GB RAM.

  But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
  Otherwise, you will get some compatibility issues

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

  To anyone who thinks of a memory upgrade on the NB550D:

  The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
  Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

  I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

  Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

  It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

  Thanks for the comments

  Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
  So to use all of the 4 GB RAM 64-bit system is required.

• Question about upgrading memory Satellite M55-S1001

  can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

  Hello

  First of all, if you want to go for fastest laptop, you should start with simple things.
  Try to defragment the disk, turn off the background process is not necessary, etc.
  Upgrade memory will the powerful laptop and of course a lot more quickly.

  To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

• Pavilion dv6t-7000: dv6t-7000 display bezel

  A piece of plastic shaped triangular white fell behind the frame of the screen.  He seemed to hold the bezel as well as the screen itself.  What type of party is it is and how can I order a replacement?  I have a HP Pavilion laptop dv6t-7000 select edition.

  Hi @_Knightowl_

  I entered that dislodged a piece of display frame and it has come loose.  You are interested to make a replacement.

  Here is a link to HP Pavilion dv6 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3, page 23, section 1, the display.  There is also a link for the subcomponents for you, click view the.

  Here is a link to HP, HP spare partsto help with the purchase of parts

  You can also try to do a Google search for the part number.

  Good luck!

• I have iMac 5 k mid 2015 upgrading memory

  How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

  Installation video are visible by clicking on

  http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• HP Pavilion dv6t-7000 CTO: impossible to install the Intel HD Graphics driver

  Hello

  By mistake, I installed the Standard VGA graphics card to replace the Intel HD graphics card on my laptop. Now, I want to just reinstall the graphics driver Intel Graphics HD 4000. For some reason, I get the error message "Setup could not install one or more device drivers. What is the cause of this problem? I tried to restart, restart in safe mode, disabling/uninstalling the VGA driver, but had no success.

  It seems that the driver I'm supposed to install is win64_153336 - using the update utility Intel also gives me this result. He simply refuses to install it. I had this problem before, then I got around it by installing an older driver, sp56808. Now, even if it does not work.

  My laptop is a HP dv6t-7000 CTO Entertainment Notebook PC and my OS is Win 7 Ultimate x 64.

  Thank you for your help.

  We can always hope

  The problem has been resolved. I ran the utility to update again, then downloaded an older version, which is win64_153335. For some reason any, this version successfully installed. Before that, I always had the same error with the other drivers. I must say that I have no idea of what has past.

  It was a pretty trivial thing, and even if it's fixed now, I'm not exactly sure how. I would delete this topic if I could, to leave room for other topics.

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v