Upgrade memory on Tecra M7

Similar Questions

• Upgrade memory for Tecra A5

  Hello, if anyone can help, I would be very grateful.

  I have a Tecra A5 that I bought a few years ago and recently it has become quite slow. On the suggestion of a colleague, I rebooted the machine, remove a lot of unused programs and it seems to have improved.

  However, I would like to upgrade the RAM. Currently, the task manager tells me I have 1 GB of available, and I read that the Tecra A5 can handle 2 GB, which seems likely to boost performance.

  However, looking at the manual and at the bottom of the laptop, it only seems to be a slot to expand memory. Looking at websites selling RAM upgrades, there only seems to be 128, 256, 512 and 1024 MB memory upgrades.

  Here's the question. Should I buy two memory upgrades 1 GB (and if so, where did I put the other?)

  I have a feeling that when I bought the laptop, the seller has provided two upgrades memory of 512 MB.

  Thanks for any advice on this.

  You are right. Your Tecra can be upgraded up to 2 GB. Compatible RAM module has PA3313U-2M1G part number. Are you a location is available downstairs?
  This old Tecra is unknown to me, but what I do know, is that all laptops with a RAM slot at the bottom have an another slot memory under the keyboard.

  If you want to have full access to this slot machine, you must remove the keyboard.

• Upgrade memory for Tecra CDT 550

  I have a toshiba tecra 550 CDT laptop with 64 MB of RAM.

  I want to migrate the RAM.

  Memory expansions I could install and what is the maximum size of the memory?

  Thanks for any help.
  Jochen

  Hello

  Well, as I know you can upgrade memory for max 160 MB.
  I found information on this module and it is compatible with your laptop:

  16 MB RAM Part number: PA2039U
  32 MB RAM Part number: PA2043U
  64 MB RAM Part number: PA2044U
  128 MB RAM Part number: PA2054U

  Good bye

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• Upgrade memory on Tecra M1

  Could someone tell me what memory I need to upgrade I have installed currently 512 but don't know what type it is

  Hello

  At first a general info:
  You could upgrade the memory up to 2 GB. So you can use max 2 x 1024MB
  The laptop must also manage these modules:
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)
  PC2100 1 GB (PA3278U-1M1G)

  Modules specification is SODIMM DDR - 266 MHz / PC2100

  Hope that my information will bring more light in this case bye ;)

• Installation upgrade memory on Tecra M2

  Dear Sir.
  bought me a memory 512 MB (received, verified material) but I want to install myself in the laptop: is it difficult and I have to download the driver for it or does windows xp pro detects the hardware configuration?
  so I have a tecra m2 windows xp pro 1.8 GHz, 512 MB
  Thanks in advance
  Dr. weekx reg

  You n t need drivers or programs to install the memory modules.
  The location of memory, you will find downstairs. The lid is placed in the middle.
  To remove the screw and the cover to see the slots. After installtion module please enter the BIOS to check if the value of the memory is correct

  I think the detailed instructions you will find in the user manual which must be preinstalled on the laptop.

  Be sure to use compatible modules!

• Upgrade memory Tecra A7

  I notice any performance gain (in WinXP Pro) if I put the sticks of DDR2-667 memory instead of DDR2-533 modules standard in my Tecra A7-202? I've already upgraded memory in my notebook from 512 MB to 1 GB (I added the second module of 512 MB - DDR2-533), but now I am considering upgrading to 2x1GB, possibly in DDR2-667.

  Hello

  Are you sure that the DDR2-667 memory modules are compatible?
  To my knowledge the Tecra A7 supports only DDR2-533 modules.
  These are 200-pin SODIMM DDR2 PC2-4200, CL = 4, NON - ECC, DDR2-533 modules

  But to tell the truth I put t think you will feel a performance increase with the help of the DDR2-667 modules.

• Upgrade memory on an all in a single LX830

  I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

  Well, mainly upgrade memory depends on the support of the chipset/CPU.

  Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

  A property used by a 4 GB RAM module and housing is free.
  This is why it must be able to use another additional module of 8 GB RAM.

  But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
  Otherwise, you will get some compatibility issues

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

  To anyone who thinks of a memory upgrade on the NB550D:

  The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
  Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

  I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

  Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

  It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

  Thanks for the comments

  Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
  So to use all of the 4 GB RAM 64-bit system is required.

• Question about upgrading memory Satellite M55-S1001

  can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

  Hello

  First of all, if you want to go for fastest laptop, you should start with simple things.
  Try to defragment the disk, turn off the background process is not necessary, etc.
  Upgrade memory will the powerful laptop and of course a lot more quickly.

  To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

• I have iMac 5 k mid 2015 upgrading memory

  How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

  Installation video are visible by clicking on

  http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v

• Upgrade memory for Satellite 2800 400

  I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

  Hi Ben

  Maybe you used the memory modules bad.
  As far as I know that you can upgrade memory for max 192 MB
  The 64 MB has been installed in an internal memory and cannot be deleted.

  I found these compatible modules:
  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• Upgrade memory for Equium L20-264

  Hello

  I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

  Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
  -Windows® XP Home Edition
  -60 GB hard drive
  -256 MB DDR2 RAM
  -15 "TFT color display
  -Drive DVD Super Multi (Double Layer)

  Issues related to the:

  1. How can I remove the existing memory? Is there a guide of the user on this operation?

  2 How many slots have?

  3. What is the max memory per slot?

  4. can I buy Toshiba memory directly?

  It is rather urgent and would like a quick answer.

  Thanks in advance
  Rag99

  Hi mate.

  As far as I know your laptop supports two memory locations.
  They must be placed at the bottom of the unit.
  If you n t know how to change this then I recommend consulted the user manual!
  The manual can be downloaded from the Toshiba European page.
  I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

  PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules