Upgrade memory SL500 with latency case of G.Skill DDR2 667 (PC2-5300) 4. Comnpatible?

Similar Questions

• Possibility to upgrade memory R710 with 16 GB module

  Hi, I need help for upgrade with the module of 16 GB for my R710

  My R710 is already filled with memory module 32 GB of config (G484D) - DUAL IN - LINE MEMORY MODULE..., 4 G, 1066, 2RX4X72, 8, 240, REGULATION

  I can improve it with (A5008568) - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV below optimizer mode configuration? Please suggest.

  In this way with this 16 GB modules if I be mixed with module 4 GB 1066 mhz previous cumulative total memory perfomance down to 1066 mhz? logic which is not suggested

  DIMM_BANK_A_SLOT_1 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_2 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_3-
   
  DIMM_BANK_A_SLOT_4 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_5 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_6-
   
  DIMM_BANK_A_SLOT_7-
   
  DIMM_BANK_A_SLOT_8
   
  DIMM_BANK_A_SLOT_9
   
   
   
   
   
  DIMM_BANK_B_SLOT_1 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_2 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_3-
   
  DIMM_BANK_B_SLOT_4 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_5 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_6-
   
  DIMM_BANK_B_SLOT_7-
   
  DIMM_BANK_B_SLOT_8
   
  DIMM_BANK_B_SLOT_9

  Utpal1

  I propose to upgrade all R710 with (A5008568) - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV... Certainly, I hope that it will work well with my server with processors E5520 and would also work with existing (G484D) - MEMORY MODULE... 4G, 1066, 2RX4X72

  It should work with the 4 GB DIMMs in 7/8. I edited a couple of my posts to clarify certain limits with the rank of quad DIMMS and the CPU 1.35v. I added two notes stating that grade quad DIMMS will operate at 800 MHz when filled 2 per channel, and 1066 MHz speed limitation for the CPU 1.35v to apply the dual rank DIMMS or higher when filled with a minimum of 2 per channel. As part of our conversation I do not think that it you confused, but I wanted to clarify information for future readers.

  Let us know if there are problems with the upgrade.

  Thank you

• Upgrade memory issues with Satellite P200 - 10 c

  I have upgraded to 4 GB as from Toshiba Web site says it supports 4GB. In the bios, I only see 3070 MB and Windows 7 64 - bit says (3.00 GB RAM) 4.00 GB RAM usable.

  Why?
  In Task manager is also said 3070MB of memory total.

  Hello

  4 GB of RAM should be possible.
  The laptop seems to support the Mobile Intel® 945 PM Express Chipset and according to the Intel Ark page, 4 GB of RAM are supported by 945 PM
  http://Ark.Intel.com/products/chipsets/22817

  I recommend to check the advanced startup options:
  1. Click Start, in the search bar type msconfig and press to enter.
  2. System Configuration window appears on the screen.
  3. click on the tab named "boot".
  4. click on "Advanced Options" and uncheck the box 'memory Maximum.
  5. now restart again and check the available memory.

• Upgrade memory for D620/D820

  Hi-

  I understand that memory PC2-5300 is faster than PC2-4200, but that's all as far as I know. I have a Latitude D820 and a D620 that I would like to upgrade. Which should be considered while deciding which modules to go with? I know that I can use either and they should be matched pairs.

  DDR2-667 PC2-5300

  DDR2-533 PC2-4200

  Thanks for your help!

  memcneely

  
  

• is DDR2 - 667 mhz or DDR2 - 800 mhz memory on the s10-2

  Hello, I want to just make sure that this model (s10-2) can support DDR2 - 667 mhz or DDR2 - 800 mhz memory

  and what is memory maximum ram can be updated... ?? 2 GB or 4 GB...

  also, can I find ram gaming/high-performance notebook on the market...? like office

  What ram to games / high performance type can support this model...

  Hello... Quote "backward compatible with 533 MHz and 667 MHz speeds - does that mean..?
  System itself works in 667 MHz... even when you buy and install a 800 MHz Memory Stick... it works with 667 MHz... machine will become not faster, but won't work that means backward compatible...

  800 = 6400 see table...

  Can.   Transfer transfer ModuleName MemClock i/o clock rate
  100 MHz PC2-3200 DDR2-400 MHz 200 400 MHz 3.2 Gbps
  DDR2-533 PC2-4200 133 MHz, 266 MHz 533 MHz 4.2 GB/s
  DDR2-667 PC2-5300 166 MHz 333 MHz 667 MHz 5.3 GB/s
  DDR2-800 PC2-6400 200 MHz to 400 MHz to 800 MHz 6.4 Gbps

  cordially KalvinKlein

• Upgrade memory of 512 to 2G on a T43 gave rise to a white screen with the power upward

  I type Thinkpad T43 2687 and I added 1 GB DDR2 RAM PC2-5300 for the slot originally neath expansion slot and then I added the Mithraeum card to replace the size 512 under the keyboard.  Power to the top of the battery and AC lights came, but the screen remains blank. Then I replaced the card of underkeyboard with the original 512 memory card and nothing changed, finally I removed the second 1 GB card so I was back to the original configuration and all is back to where I started.  Everything works but no upgrade memory.

  No idea why the system does not recognize the additional memory or worse, why he stopped the whole of the system?

  Also any ideas how memory works on the upgrade I used kingston in my approach?

  Thank you

  The slot premanente RAM thus cleared, pop 1 GB under the keyboard and let us know what happens.

• HP ProBook 470 G3: upgrade memory and storage in the HP ProBook 470 G3 17.3 "

  Hello

  I would like to buy HP ProBook 470 G3 17.3 "after reading the review of this laptop in Notebookcheck.net site,

  The laptop has a large 17.3 display, I think in ZBook but is too expensive so I need Quadro GPU or CPU high range this ProBook G3 17.3 "is the best choice as I thought... by the way

  My question on the model with the product number: T6D90UT

  CPU: Intel® Core™ i7-6500U with Intel HD Graphics 520 (2.5 GHz, up to 3.1 GHz with Intel Turbo Boost Technology, 4 MB cache, 2 hearts)

  RAM: 8 GB of SDRAM DDR3-1600 (1 x 8 GB)

  Internal drive: 1 TB 5400 RPM SATA

  Display: 17.3 '' diagonal backlit flat antireflection FHD LED (1920 x 1080)

  GPU: AMD Radeon R7 M340 - 2048 MB, Core: 1021 MHz, memory: 1000 MHz, DDR3, 64 bit interface

  Website of notebookcheck and HP site says the laptop has DDR3-1600

  http://www.notebookcheck.NET/HP-ProBook-470-G3-core-I7-6500U-Radeon-R7-M340-notebook-review.155142.0...

  http://store.HP.com/us/en/PDP/laptops/HP-ProBook-470-G3-notebook-PC-%28energy-star%29-t6d90ut-ABA#SP...

  While the HP parts store said that the portable DDR3L?

  Memory module 8 GB 1600 MHz, DIMM DDR3L PC3L-12800 (SHARED)

  Reference number: 693374-001

  Visit this link please

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=709EC0F980AD4FC3A887C0C5C3DB5C46&SearchIn=P...

  It's great so far but what make me confuse is the price of RAM, there are two parties with the same name, the two net price is $209.00 (it's too expensive there technical error or what)

  I can buy 16G. B (8 x 2) Kit from Newegg in the 57 to 100 such as price range below

  CORSAIR Vengeance Performance 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) laptop computer memo...

  Priced at $ 69.99

  Case latency: 9

  Time: 9-9-9-24

  Voltage: 1.35v

  Multi-channel Kit: Dual Channel Kit

  Model #: CMSX16GX3M2B1600C9

  Item #: N82E16820233587

  But I say that if I could, but the same part in HP it will be better for the stability and the use of long date because the series HP's ProBook made with too many test and the part use inside, he is selected to make the laptop to run higher stability.

  If the price is right and it's expensive so can I but the corsair with latency case kit Timing: 9-9-9-24 and tension: 1.35v, is also the RAM inside the laptop DDR3L with voltage: 1.35v

  Another question if I want to use the SSD for the system slot m2 inside the laptop only used there not I think to buy

  SSD Samsung 950 PRO - Series 256 GB PCIe NVMe - M.2 SSD internal 2 inches MZ-V5P256BW

  and as a primary partition for the windows system and the 1 TB drive will be secondary disk for my files is that fine or the laptop works with some LAGS and slow.

  Here is the Service Manual:

  Manual

  It has doors on the bottom so is very easy to upgrade. It takes DDR3L-1600 low voltage (1.35) up to 2 x 8 modules for total 16 concerts. It is the specified memory:

  8 GB (PC3L-12800 1600 MHz, DDR3L) 670034-001

  It has a slot of the WSSD m2 using modules with this form factor:

  

  If you need assistance more let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• upgrade memory dv6t-7000

  I have a laptop dv6t-7000. He moved with memory of 8 GB (2x4gb) 1600 (PC3-12800). CPU - Z shows the calendar as the 11-11-11-28 (and 1.5V). I want to replace the 8 GB (2x4gb) with 16 GB (2x8Gb) 1600 (PC3-12800). I can get 16 GB of memory 1600 (PC3-12800) (with the same 1, 5V voltage) to a few different timings. I could get the same schedule (11-11-11-28), two different choices with latency case 10 (10-10-10-28 or 10-10-10-27), saying or what latency case 9.

  I think that the choice with the lowest latency case could be slightly faster if they run with this calendar. However, I don't see anywhere in the BIOS or somewhere else where I can change all the settings of the memory, so I'm afraid that if I get one of the "fastest" just choice will work to the same schedule as existing memory. So it would be wise to stay just with (2x8Gb) 1600 with timing 11-11-11-28.

  Has anyone replaced their memory with RAM with faster (that which came installed by HP) timings?  He run to the programming of schedules faster or to the timings of the same as the original of the RAM?  Any other advice?  Thank you.

  I went ahead and got the memory with faster timings. I have nothing except take the old memory 2 x 4 GB and put it in the new 2x8Gb memory (e.g., no change in the BIOS or elsewhere). The original brief was on 11-11-11-28. The new memory reports 9-9-9-27, so he did spend at these times on its own. And benchmarks reported an increase in speed.

  This of course is not anything most people (including me) will be probably already noticed. But if you do anything that uses all the memory for hours at a time (for example, the mathematical models), I think that small time savings can add up over many hours of constant of memory intensive tasks. So, while I usually use my desktop for these tasks, when I need to do away from home (or when my offices already chewing on a different problem), I am satisfied with the improvement.

• Upgrading memory on the PXI-8105 controllers and PXI-8106

  Hello

  I've recently upgraded the memory of three PXIs; one with a PXI-8105 controller and two with the PXI-8106 controllers.  Both the 8105 and 8105 can have a maximum of 4 GB (2x2gb) DDR2-677 (PC2-5300) (see links below).  However, on the three systems, both the BIOS and the o/s only see 3.3 GB.  No idea why this might be the case?

  I tried to Flash the BIOS (v1.4 on the two PXIs), but without success.

  We use COTS memory (i.e. not purchased NOR) but I would be badly pushed to believe it is the cause of the problem.

  Thank you.

  Links;

  • The PXI-8105 http://sine.ni.com/nips/cds/view/p/lang/en/nid/202630 max memory capacity
  • The PXI-8106, http://sine.ni.com/nips/cds/view/p/lang/en/nid/203442 max memory capacity
  • Update BIOS page: http://digital.ni.com/public.nsf/allkb/9C9362590B05CD6E86256B270082164A

  I don't know about the BIOS reports less than 4 GB. Here's a blog post that best describes what I wanted.

• Satellite Pro L100 upgrade memory (psla1e)

  I realize that this unit uses DDR2 533 Mhz memory, but I wonder if it will use DDR2 667 Mhz so I can stay in 4 GB of RAM. If someone can confirm that it would be great.

  Thanks in advance.

  What is the Chipset of this laptop?

  You can use the CPU - Z utility to display chipset. Then google the chipset for the specification model. For example, google "Intel Chipset i945 spécifications"

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• Upgrade memory for Satellite U200: are supported with 667 mhz modules?

  I am a new user and I'm on a Toshiba Sat U-200-115. I want to upgrade, and I intend to do an upgrade to 4 GB.

  What I want to know, although it said this laptop supports the upgrade to 4 Gig, but this model use a DDR2 533 MHz memory. Considering that since the Web from Toshiba site, I see only 1 slot memory of Gig available with this clock speed and a 2 Gig DDR2 available with clock speed of 667 MHz. What I want to know, if I want to upgrade to 4 GB memory with clock speed more high clock (667 instead of, 533) would work on this machine?

  Thank you.

  Hello

  It depends on the chipset of your Satellite U200-115.

  If chipset supports 4 GB of memory and BIOS and Vista supports 4 GB of memory too, then you can go use the full 4 GB of RAM.
  If the FSB takes care also of 667 Mhz then modules of memory would also go wit full 667 Mhz speed.
  If the chipset supports only 533 Mhz then the chipset would slow the 667 Mhz module and memory would go only to 533 Mhz.

  So what you have to do is check what chipset is equipped in the U200-115.
  Full details and specifications of chipset you can find on the page of Intel.

  But generally, there is no big difference between the modules of 533 Mhz and 667 Mhz modules 667 Mhz turns a little faster but you won't see everything boosts performance

  Concerning

• Need help with upgrade memory on the Satellite A100-250

  Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 MB.

  I want to buy an another slat memory ddr2-533 512 MB, what model exactly I needed to research, they were working in a pair.

  Sorry for the bad English. From Russia with Love.
  PS. I like to drink Russian vodka :)

  Hay

  Your laptop can be upgraded up to 2 GB and compatible RAM is DDR2 400/533 1 GB (PA3411U-1M1G).

  Use this part number in Google and you will find it.

  Bye and don t drink too much Vodka. ;)

• Upgrade memory PC 2 GB to 4 GB - problem with Indesign CS4

  I use Indesign CS4 on a PC (XP Professional SP3) that has 2 GB of memory. InDesign would go, but it has been slow, so upgraded to 4 GB. InDesign is running, but when we try to cut the text on one application and paste it into the document Indsign, he hesitates for a second or two before finishing the task.

  Is there some settings in Indesign to be considered in the upgrade memory? Any help or thoughts on this would be appreciated.

  I don't think that the problem is caused by InDesign.

  Look at this link http://coreldraw.com/forums/p/7802/64716.aspx

  Concerning

• Upgrade memory and disk SSD Qosmio F50-108

  Hello!

  After 3 years, I decided to upgrade my [Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 055727 & DISC_MODEL = 1] new SSD and additional memory.

  With a drive, I'm pretty well agreed the [Intel 320 120 GB SSD | http://www.intel.com/content/www/us/en/solid-state-drives/solid-state-drives-320-series.html], unless you recommend something different maybe?

  But I have the problem before deciding what size memory to take. Now, I 3 072 (2 048 + 1 024) MB DDR2 (800 MHz), and CPU - z says it runs in mode dual channel with timings 6-6-6-18(on memory stick it says 6-6-6-12?). I watched [Patriot DDR2 SO-DIMM 4 GB 800 MHz | 787 http://patriotmemory.com/products/detailp.jsp?prodline=3&catid=33&prodgroupid=59&id= & type = 5], and he said just in time of latency case 6. I have not found on the internet what timings there so I have a question:

  If I buy 1 (one) memory stick (Patriot) and replace it with 1 GB stick in laptop, old 2 GB + 4 GB new work in dual channel, or do I have to buy 2 x 4 GB (Patriot)?

  If this does not work, you rather 6 GB with channel single or dual channel 4 GB.

  Thanks for all the answers!

  > I pretty much agreed with drive, Intel 320 120 GB SSD, unless you recommend something different maybe?

  I think it shouldn't be a big problem with the compatibility because the HARD disk controller supports the SATA interface and the SATA SSD drive should also be compatible.

  > If I buy 1 (one) memory stick (Patriot) and replace it with 1 GB stick in laptop, old 2 GB + 4 GB new work in dual channel, or do I have to buy 2 x 4 GB (Patriot)?

  Dual Channel does not require two execatly the same memory modules.

  So, theoretically, you can use a module of RAM 2 GB and 4 GB RAM module.
  I advise to use 4 GB of RAM in A slot and 2 GB of RAM in slot B

  But the two modules must supports the same speed (800 Mhz), otherwise the module more quickly would be pointing down.