Upgrade my dell 3000 dimension to an SSD.

Similar Questions

• Can upgrade you Dell Dimension 4400 to Vista/WIN7

  Can upgrade you Dell Dimension 4400 in Vista/WIN7?

  Meet the system requirements? If Yes, you can purchase Windows 7. If not, stick with XP.

  Windows 7 system requirements

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • Graphical device DirectX 9 with WDDM 1.0 or higher driver

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Its Dell 3000 suddenly stop working

  I have dell 3000 pc about 5 years. After that I deleted some programs (digital camera, etc.) my sound does not work. Original sound card: Audio integrated (product code:;) Ref: 313-2758). I tried troubleshooting without end. help? Thanks-Mike

  Do not know if I chose the right Forum - sorry, computer illiterate here...
   
  [Moved from comments]

  I have dell 3000 pc about 5 years. After that I deleted some programs (digital camera, etc.) my sound does not work. Original sound card: Audio integrated (product code:;) Ref: 313-2758). I tried troubleshooting without end. help? Thanks-Mike

  Do not know if I chose the right Forum - sorry, computer illiterate here...

   

  [Moved from comments]

  Visit the Dell website to download and install the compatible audio driver.

• Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Hi, I was wondering if I need different software or?   Tent for upgrade achieve performance more than one old computer.   When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added.   3.6 GHz was also used in the 650's.  Just by looking at the cpu they look the same to me.  Any ideas is better than what I have now.   Dell number is 4QXB451

  This isn't the site for these answers... Try intel.com/support/cpu

  Youre pc requirments are based on the chipset boards, chips intel only run with

  the default CPU.

• Whenever I restart my Dell 3000 I get this message: "primary drive 1 not found; Secondary drive 1 not found. »

  Whenever I restart my Dell 3000 I get this message: "primary drive 1 not found; Secondary drive 1 not found. "Then, I received instruction to hit F 1 to continue, which then takes me by the beginning upward. I get as both "F 2 = Set up" and "F 12 = Boot menu." The latter I have looked but frankly have no idea what to do or how it might solve my primary problem. What should I do to simply go through the commissioning by turning on my computer?
  GRDavis

  * original title - starting problem *.

  This isn't a problem of Windows XP. But take a look here:

  http://forums.CNET.com/7723-10149_102-162197.html

• I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  See this article would allow:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

• Upgrade memory Dell Dimension 9150

  Hello

  I'm looking to upgrade memory RAM on my Dell Dimension 9150 Dual Core (DXP051) clocked at 2.8 GHZ with 1 GB of ram. Motherboard is Dell 0YC523. IGB memory currently.

  Watching the RAM is OCZ Enhanced latency Platinum XTC Edition revision 2 with speed 800 Mhz - CL4 (4-4-4-15) latency. 2 GB

  OCZ recommendation is to increase the volatge of ram to 2.1V on the BIOS but I don't think that this is possible on the Dell motherboard.

  Previousposts research, someone also asked a similar question but for an XPS 720 PC.

  The solution suggested something about SLI or EPP ready... I'm not sure what it means. This means that the RAM must be SLI or EPP ready to be compatible with the motherboard of Dimension I or the mothersboard must be ready for use of these modules of memory SLIp/PPE? Can I use this module and if so, how do I change the voltage or the motherboard will adjust it automatically?

  If not, can I get some other RAM?

  Thanks in advance.

  
  

• Upgrade CPU Dell Dimension 9150

  Hello!

  I have a Dell Dimension 9150 and it has a Pentium D 2.8 Ghz processor.

  Dell.com support lists: processor, 80547, PENTIUM D SMITHFIELD for workstations..., 820 SKT - T, male

  What is the highest and/or upgrade best remaining for the Pentium D processors?

  Where are some of the best places to shop in a relatively straight price besides eBay?

  I read so many messages but still confused.

  Discovered that she can be Pentium D 840, 3.2GGhz, but has noticed that some people say that there is more available as the Pentium D 930, 950 or 945 processor.

  Intel website is very confusing because it does not necessarily list the most valuable info and there are variations within each class of processor.

  I intend to keep (hopefully!) the computer for another 1-3 years (?), have upgraded from storage for 2 hard drives of 1 TB, maxed out 4G memory (although Windows XP won't recognise that the 3.5 G) and has even with graphics card, Radeon 256, X 600 MRMGA 370W PSU +.

  I would like to upgrade processor for video work that I perform.

  Did not notice a fan of the sink on top of processor but check! Will I need one? Thermal glue specific for help?

  Any suggestions would be greatly appreciated.

  Thank you!

  MrMojo1

  You should be able to switch to a Pentium D 960 3.6 GHz

  It is a passive radiator and the fan inside the fairing.

  As you intend to reuse the heat sink, you must plan on his basic cleaning and reapplying thermal paste to the processor.

  Instructions for cleaning and application of thermal paste, are HERE.

  You only need a small tube of thermal paste, it can be purchased from a computer store.

  Discover the Pentium D procesors HERE

  Bev.

• Upgrading RAM Dell Dimension 4700

  Hi all

  OK I will try once again to this type. The first time I tried to type this my Surface frozen without reason and had to be properly closed. OK, I'll update the RAM on my Dell Dimension 4700 and I need help and advice before I do. My Dell says it has 0.99 GB of RAM installed. I looked inside and found that there are two sticks of 512 MB of RAM. I found (2 sticks of 1 GB) 2GB of RAM for Dell Dimension 4700 at amazon.com and intend to purchase that. So when I update the RAM I get two sticks of 512 MB and replaced with new 2 sticks of 1 GB from amazon? Are there precautions should I take? (In addition to wear an anti-static wristband) Thank you.

  Before you buy, go to http://www.crucial.com/usa/en/systemscanner

  Download and run the Crucial scanner.  This will tell you:

  • supports memory of how many are in your computer
  • How much memory is in each
  • the maximum memory that can be installed on your computer and how
  • the right kind of RAM in your computer

  Do not buy crucial, but pay attention to what the scanner says that you need.

  In short, if you have only two supports from memory, then Yes, you need to remove the memory that is in them to put in new RAM.  However, just because you can buy two memory modules of 1 GB does not necessarily that your motherboard will accept them.

  When replacing memory.

  See http://www.crucial.com/wcsstore/CrucialSAS/pdf/install-guides/ram/crucial-dram-install-guide-en.pdf

  • take precautions against static - touch the chassis first; do not touch the contacts of the RAM modules
  • Unlock the pliers and pull it up
  • Orient the new module properly - there is usually only one way correct to put in - and push straight down firmly, but without wavering until closing locks.

• Upgrade CPU Dell dimension 9100

  Hello I have a dell dimension 9100 and I ordered a Pentium d 945 3.4 ghz and the system gives me a solid yellow light and fan gets strong it please help!

  Model MB 0 x 8582

  Intel pentium 4 cpu 3.00 GHZ

  intelcrazy

  Can someone tell me what is the fastest video card that I can use and what is the fastest processor @shesagordie @speedstep please reply

  intelcrazy

  I have already posted the fastest processor, supported by the Dimension 9100, D960 Pentium and Speedstep also posted more compatible / speed max graphics card.

  Do not forget that the Dimension 9100 is released by Dell in 2005.

  Bev.

• Upgrade a Dell Dimension 9200 360 GB Raid to 2 TB hard drive

  Hello

  I have tried this modernization and taken on drives of 160 GB 1 and put in disk 2 TB and started the PC and it did not work I tried 2 different locations.

  Can someone help me by telling me what I have to do

  to install disk 2 TB on my Vista PC running.

  I need to install my dell Vista-CD/CD?

  your help will be greatly appreciated

  Assuming you have RAID 0, RAID was probably set up to be the bootable hard drive.  If you delete one of the disks, your RAID will be completely disabled and the computer will not start.  The Dimension 9200 has six SATA ports, two upward by themselves and four other together towards the middle of the main map.  When one of these machines has been ordered with RAID Dell normally placed disks RAID on the third SATA ports and fourth, leaving the first two either vacuum or place the DVD/CD drive on the second of the two ports that reach by themselves next to the power supply.  You should be able to add your Board of 2 TB in two ways; Place it in one of the two ports next to food, or use one of the either the port of fifth or sixth sitting by the RAID.

  Once you have the new drive installed mechanically, restart the computer and use F2 during the self-test to reach the configuration of the system.  This page shows the BIOS how you want the computer to deal with its various devices.  Go to the screen that shows all your SATA devices and make sure that the port with your new hard drive is turned on.  If you skip this step the computer ignores your new drive.  Once you have done this and left the installation of the system, you will need to find the disk on your computer Manager so that you can initialize, partition and format the new drive.  You must configure a partition, even if you want to use the entire disk as one partition before you can format.

  A word of caution: computers some Dell's have some difficulties to accept a hard drive placed on a track numbered higher than the DVD/CD drive.  If you use the ports by the RAID drives and find you have problems using the new hard disk, you will need to plug it into the port of the first or second, depending on which is not used by the DVD/CD drive.  The RAID drives are not normally affected by this problem because they are managed by the ROM of RAID Intel and the computer does not see them as a SATA hard drive.

• Upgrade CPU Dell Dimension 5150. Is the cooling system to work?

  I have a Dell Dimension 5150 with a Pentium 4 HT 630 (84 W tdp). I want to replace it with a Pentium D 920 (95W tdp) is the heatsink and the fan is going to face? I'll be cleaning and demean the new thermal paste.

  PonderBoy

  Yes, the default heat sink and fan should be thin.

  Bev.

• Can I upgrade my Dell Inspiron 3000 SFF desktop computer to install my TV Tuner, Pinnacle card?

  I have a previous Pinnacle PCTV digital TV (model #8230 Pinnacle TVC Pro4 SD) tuner card I bought Oct 2008 Best Buy for $88 for my desktop so that Windows XP-which has since died. I want to install in my desktop Dell Inspiron 3000 Form Factor bought February 2015, which has Windows 7 with Windows Media Center, so I can watch TV on my computer screen all working. It did not come with a TV tuner. Is it possible to install a TV tuner in this computer?  I searched the site Web of Dell to nothing does not.

  Not that the tuner is obsolete and the small footprint is really tiny and lacks housing for it. A 7-year-old tuner may not work on windows 7 in any case. It does work on Windows 8 in all. All the tv is now digital.

  TV tuners are becoming less popular, given that some cable companies have introduced all the channels that you subscribe online. My Time Warner service has all my subscribed channels available online, including local stations and HBO and Showtime. Check with your cable provider to see what is available for you online - a much better picture and easy to use.

• Upgrade CPU Dell Dimension E520

  Hello

  At the moment, I have a Dell Dimension E520 with an Intel Core 2 Duo E4300 processor. Intel Core 2 Duo and Intel Core 2 Quad processors are compatible with the Dell Dimension E520?

  Stefan4348

  Kit of P4 Presler 915, 2. 8 g, 2 x 2 MB, FSB800, D0
  Kit of P4 Presler, 925, 3. 0 g, 2 x 2 MB, FSB800, D0
  Presler P4 Kit, 930, 3. 0 g, 2 x 2 MB, FSB800, C1
  P4 Kit, 935 Presler, 3.2 G, 2 x 2 MB, FSB800, D0
  Presler P4 Kit, 940, 3.2 G, 2 x 2 MB, FSB800,
  Kit P4 Presler, 945, 3.4 G, 2 x 2 MB, FSB800, D0
  Kit P4 Presler, 950, 3.4 G, 2 x 2 MB, FSB800, D0

  Cedar Mill Kit, 347, 3.06 G, 512 K, 533FSB, D0
  Cedar Mill Kit, 352, 3.2 G, 512 K, 533FSB, D0
  Cedar Mill Kit, 356, 3.33 G, 512 K, 533FSB, D0
  Cedar Mill Kit, 631, 3. 0 g, FSB800, 2 M, C1
  Cedar Mill Kit, 641, 3.2 G FSB800, 2 M, C1
  Cedar Mill Kit, 651, 3.4 G FSB800, 2 M, C1
  Cedar Mill Kit, 661, 3.6 G FSB800, 2 M, C1
  Cedar Mill Kit, 631, 3. 0 g, FSB800, 2 M, D0
  Conroe, E4300, 1 Kit. 8 g, 2 MB, FSB800, L2
  Kit of Conroe, E4400, 2.00 G, 2 MB, FSB800, L2
  Kit of Conroe E6300, 1.86 G 2 MB 1066FSB, B2
  Kit of Conroe E6300, 1.86 G, 2 MB L2, 1066FSB
  Kit of Conroe, E6320, 1.86 G, 4 MB, 1066FSB, B2
  Kit of Conroe, E6400, 2.13 G, 2 MB L2, 1066FSB
  Kit of Conroe, E6400, 2 MB, 1066FSB, B2 2.13 G
  Conroe E6420 2.13 G, 4 MB, 1066FSB, Kit B2
  Conroe E6600, 2 Kit. 4 g, 4 MB, 1066FSB, B2
  Kit of Conroe, E6700, 2. 66 g, 4 MB, 1066FSB, B2

  Smithfield P4 Kit, 805, 2. 66 g, 2 x 1 MB, 533FSB, B0
  Kit of Smithfield, 820, 2 P4. 8 g, FSB800, 2 MB, Mainstream, B0

  Kit of Celeron Prescott, 336, 2. 8 g, 533FSB, 256 K, G1
  Kit Celeron Prescott, 346, 3.06 G, 533FSB, 256 K, G1
  Kit Celeron Prescott, 351, 3.2 G, 533FSB, 256 K, G1
  P4 Prescott, 531, 3 Kit. 0 g, FSB800, 1 MB, G1
  Prescott P4, 541 Kit, 3.2 G, FSB800, 1 MB, G1
  Kit P4 Prescott, 524, 3.06 G, 1 MB, 533FSB, G1

  And possibly the Q6600 and Q6700, see here:

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19312684/19705955

  Before installing the processor, verify that the BIOS version 2.4.0 is placed, while support for new processors has been added.

  Note: Only 65 processors with 800 or 1066fsb will work with the E-520.

  Bev.

• Dell Precision 5510 - M2 SATA SSD

  Hello

  I recently bought a Dell Precision 5510 and I now intend to install a 500 GB SSD (M2), or a Samsung 500 GB 850 EVO m2 and a critical CT500MX200SSD4.

  Does anyone know if one of these two SSD is compatible or have any problems with this laptop?

  Thank you

  J.

  Thanks for posting your request here.

  These two device should work without any problems after the upgrade.