upgrade of desktop memory
BF13, I don't think that memory in the link you provided will work. The motherboard supports Dual-Channel memory. It is faster than the modules in the link.
Here is a link to HP Store. I suggest you contact them to ensure that you purchase the correct memory. They should be able to help you.
Let me know if you need assistance.
Tags: HP Desktops
Setup: HP Pavilion p7 - 1370 t.
Motherboard of Carmel (single channel architecture)
I want to upgrade to 8 GB but cannot pick up a good set of 2 x 4 GB and edge... at the same time I was wondering the performance of memory dual channel single channel iron starters:
It will work, and it will operate a maximum capacity?
Thanks in advance...
The memory that you have selected
"G.SKILL Ripjaws X Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBXL.
works perfectly according to the configuration of the memory of your PC.
Memory Must select one of the following options:
- 4 GB (2 x 2 GB) DDR3 PC3-12800 (turns the PC3-10600 with Sandy Bridge CPUs)
Hello, I am currently trying to upgrade my desktop computer to get the best out of my game. "< br > < br > here is a link to my specs: < a target ="_blank"href ="http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5295962 & amp... A10-5700 APU with AMD Radeon 7660 D HD graphics card. I think that the GPU can be integrated into the CPU? < br > < br > I want to switch to the video card Nvidia GeForce GTX 660, but I don't know if my rig is compatible. And then there is the question of food. I looked into this myself, but because of my lack of knowledge on this subject, I feel I might be more difficult than it actually is. If you could help me out, I would be very happy.
Here are the specifications of your desktop HP Pavilion p7-1430. According to the specification, this model has AMD Radeon HD7660D integrated to the APU. In addition, this model has a PCIe x 16 graphics card expansion slot and a 300 Watt power supply.
You need to replace the power supply factory with a more powerful device. It seems that most GTX 660 cards require a minimum of 450 to 600 watts power, depending on the exact card. Please consider the Corsair CX500, CX500M, CX600 or CX600M.
You will also need to measure along the plane of the PCIe x 16 location at the rear of the case further to determine if there is enough space for the card you select. If you find all the obstacles before reaching the length of the card, the card is not appropriate.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
Can I up grade my pc with xp to my new laptop 7
Windows 7 program on your laptop may not be transferred or copied to another PC.
If you want to upgrade your computer to windows 7, you need to download the Upgrade Advisor free windows 7 to see if your computer can run windows 7.
Then you can buy a version upgrade of sale retail of Windows 7 and upgrade your desktop computer to W7.
Original title: Mr Ombessa
I need your help if you can.
The issue is to upgrade my desktop Acer Vista 32 bit for windows 7 32 bit computer.
I got Windows 7 Upgrade advisor report that shows just the NVIDIA nForce System Management Controller is not compatible
I visited and contacted people from the Acer website but nobody gave me the answer on thiis.
Can you help me with this problem since 2014 I always look for the answer.
Thank you very much
It is possible that Windows Update provides an updated after updating to Windows 10 driver.
I would uninstall video card before to well.
Click Start, type: Device Manager
Expand the graphics card
Right-click in the map, then click on uninstall.
I have Toshiba NB520, and I would like to know if it is possible to change to a new 4 GB RAM?
If I replace the 4 GB memory, the computer cannot restart!
do you know why? I try to update the Bios without success.
If an organization can help, thanks
Yes it is possible. I have NB520-11. After reading many threads here I've done my own experiences.
Using 4 GB RAM on preinstalled original Win7 starter doesn't have any effect because only 2 GB will be usable. I've install my own Win7 32-bit Home Premium and system displays now 4 GB installed and about 3 GB will be usable.
To upgrade I ve used 4 GB of RAM on my Satellite P500. There PA3677U-1M4G part number.
I have a Tecra A6 with 1 GB memory installed at the factory again. I want to upgrade to the maximum of 4 GB and bought the bars of memory Crucial 2 x 2 GB after executing their scanner to detect the right product.
When I opened the cover of expansion memory I don't see an expansion slot (which is empty). Where is the other?
First of all, I must say that you cannot improve it to 4 GB (2 x 2 GB) of RAM.
I took a look in the user manual which you can download from the Toshiba support page and it says that you can use 2 x 1 GB RAM max.
The two slots should be placed at the bottom of the unit.
I m not a Tecra A6 owner but my other laptop contains two slots memory and if a module is placed the other slot is hidden and not visible.
Then maybe you forgot
I have a p6-2200ea desktop computer and you want to update the graphics card for a sapphire HD 6670 2 GB DDR3 map graphic
the first question is will he fit into the case, its dimensions are: 164 (W) x 40 (W) x 107 (H) mm.
Secondly, I know I need an upgrade on my PSU with the stock not being a source of 300 watt PSU, but my second question is looking for a suitable replacement with a minimum of a 400 watt power supply which will be duly adapted my turn with the dimensions:
150 x 140 x 86 mm
Any help will be appreciated. Thank you
My L500-1kk came with the following memory specifications:
Standard memory: 4 096 (2 048 + 2 048) MB
maximum extension: 8 192 MB
technology: DDR2 RAM (800 MHz)
Locations of memory expansion 2 × (1 to configure)
1. now, I need to update my system to 8 GB, because it says that my system has 2 x memory slots, and it is Mo (2 048 + 2 048), does that mean I need to replace the original modules with 4 GB modules?
2 (1 for configure) means? is it an empty space where I can add a 4 GB module?
3. what else do I need to know about adding memory to my system?
If you want to switch to 8 GB of RAM, you must remove the two modules of 2 GB (current) and purchase two 4 GB modules.
As you have already written in the memory specifications, you need RAM DDR2 800 MHz.
You can buy new memory modules in an ASP or check you some online stores. Kingston is also good RAM modules.
Interesting information about the upgrade of RAM you will find also in your manual!
I have a desktop HP a540n with 4 GB of memory and running Windows 7 64-bit professional. If I can extend the memory beyond 4 GB with new chips of memory and if so, should which tokens I buy?
Thanks for this reply, it confirms what I hoped would be the case. I had looked on the HP for the specs on my A1540n and stated that the mobo support a maximum of 4 GB that I have now with 4 sticks of 1 GB. It would have been absurd would that limintation 4 GB, but hey I know how think a manufacturer. A couple months ago I have rehabed my load and machine Windows 7 64 bit for the simple reason that I wanted to put in more memory and now you have confirmed it is going OK. And you'vd offers a good solution, same fins has... how cool is that. I shoot all the current memory and one (or two) of these babies from 8 GB to stick and get a few years in addition to this machine. Thanks again.
So I do not know beyond the videos online on the upgrade installation and strengthening of computers, and I'm not sure what course my HP desktop PC 110-090 will be able to handle the graphics card wise if I were to upgrade. Its been a great computer, but I'm looking for a upgrade get a cleaner picture on the most demanding games I play. What would be the best product I could manage with my current PC with minimal changes, in addition to the map graphic or if necessary completely the power supply with reasonable costs?
HP 110-090 desktop PC
Kaidaking, welcome to the forum.
Because your computer has only one power supply external 90W (PSU) it will be not possible to upgrade the video. There is no slot on the motherboard for it, too.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
Hello, with Black Friday and other deals all week, I tried to make the updates on my desk. However, it is quite old and I don't know what would be not compatible. The office is linked below and thank you for all the help I can get!
What is your motivation for the upgrade? Maybe a new title of game software.
What version of BIOS of this machine? It came with WIN7 originally.
Version 8 would reflect the capacity of the UEFI BIOS. Less than version 8 would limit the graphics card for cards inherited as the GTX660/670 as a max. The PSU max suggest is 600W, and Corsair 600CX is an exact fit.
We have a 2000 Hp desktop computer? with windows ME and just recently had wireless internet access. The system is too obsolete to connect even with our router. Now, what version of Windows is necessary for us to spend to be able to connect?
Unfortunately, a Windows ME operating system cannot be upgraded. Its time to recycle that old computer and buy a new one with Windows 7 preinstalled. Here are a few examples.
Hello. I just bought the e1-472p-6860 at Costco and am interested in upgrading the RAM of 4 GB at least 8 GB. Is this possible? Worked on many laptops in my career, I don't want to remove the back cover together until I know more. If I can improve, does anyone know what would be the replacement of chip memory? I guess that 8 GB DDR3L 1600 MHZ sodimm. Fine thanks
Yes, you got the type of memory is correct, but I'm afraid you need to remove the back cover to increase the RAM.
OK Hi everybody I have a Dell Dimension 3000 desktop pc / and I am running windows xp. in any case, I use to have 512 MB of ram but now I updated and I have 2 GB of ram. But before I updated I had in my performance, then the virtual memory settings and my custom settings it what should I change them for now to get me 2 GB of faster ram PLS HELP!
* original title - PLS help me with my ram! *
Set virtual memory to "System Managed size".
Maybe you are looking for
I plugged my iPhone 6s and loaded yesterday evening? This morning, I hit the Start button and message with the time my page comes up but it shakes and will not delete by dragging the screen and will not turn off by pressing stop button on the side o
Hello I need to replace the hard drive (ST31000528AS) on my HP Pavilion p6580t CTO. I'm trying to find which drives are compatible. ST1000DM003 (promoted as a newer version of the ST31000528AS) work? What of the SSD Kingston SSDNow v + UV400 (it i
My laptop CD/DVD burner was working fine. Recently, it has disappeared from my computer, won't play audio CDs, etc. The rounds-up OK DVD player when a disc is inserted for the reader is not quite dead. Please help it's driving me crazy. Shmoo
I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.
Hi I have the following problem:I have field: 10/10/2014, I need to turn in 2014.I tried to use the substring like: substring ("field". "field" of 4 to 4) but I give the error message: ""The formula syntax is not valid.[nQSError: 10058] A general err