Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

Similar Questions

• Upgrade to Windows 10 & option lost switchable graphics card

  Sorry if this has been discussed before. I looked for a solution for the last hour, and I don't have much time today. I need to solve this problem as soon as possible. My problem was when I upgraded to Windows 10 on my laptop Windows 8.1 Y40-70. This laptop has the video card Radeon R9. After you have installed Windows 10. I lost the option when I right click on the desktop, the option "switchable graphics card. The laptop detects only the Intel version in the map.

  Is there a solution for this yet? Thank you

  SOLVED

  Found a link to the beta version of Catalyst Control Manager. It worked.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• I received a disk upgrade for windows 7 for my pc to microsoft, but now I get the message that says that my copy of windows 7 may not be true. What should I do?

  When I bought my laptop, it came with windows xp. I found that there was a lot of programs that were not compatible with xp, so I asked microsoft one say upgrade to windows 7 to upgrade my system. Everything worked fine until about 3 months ago when I kept getting a message on my screen that says that my copy of windows 7 is not genuine.  I tried all the tools on the microsoft Web site to solve this problem, but nothing has worked. Finally, I used the diagnostic tool to verify I checked that I put in the activation code is right, what is causing me to pass this message and what I can do to correct that only cost me an arm and a leg? Thank you for your help.

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK will run the next time he started - press Y, press ENTER, and then restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the created CBS.log (C:\Windows\Logs\CBS\CBS.log) file on your desktop (you can not manipulate directly) can compress the copy and transfer it to your Public SkyDrive folder (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• My screen has changed and text boxes suddenly around all topics and elements of the screen?

  Weak black lines/boxes suddenly appear and now all the texts and the major portions of the screen are surrounded by lines. My guess is that it's a setting either FF or Microsoft. If so I have not found. HG

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Updated my computer and now I get no video on the screen change the first 10... I can't hear the audio.

  Prime Minister 10

  Windows 10

  GEforce GTX960 video card

  Updated by NVidia drivers

  The video on Windows Media Quicktime etc.

  I7 processor

  Reinstall the first 10 several times

  MOV files and WMV tried both without video

  Could be a similar problem

  https://forums.Adobe.com/thread/2082964?q=elements%2010%20VI

  Download ss14 and see if you still have the same problem.

• Cannot install VISTA on Satellite A100 graphics card driver

  Hi all

  I need help.
  I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
  The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
  Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
  We know what the problem might be?
  Did someone encountered the same situation?

  It's really frustrating...

  Thank you
  Jota

  Hi Jota

  Please check the different view on the same driver problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20479

  Try to download the driver again and see your results. Thanks ;)

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• Upgraded to windows 7 and also a new hard drive

  I have a 2005 HP m7060n Media Center http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00306958 & lang = to & cc = us & taskI... running on XP
  I was looking to upgrade to Windows 7 and also install a new drive.  New readers are shipped with windows 7 already preinstalled and when I change the disks, it will start windows 7.
  How could I then exchange the old files to the new drive?
  What is your solution the best and less expensive?  How do you do this?  Help, please.
  Thank you
  Marco

  I suggest that perform you a clone of the hard drive. Seagate drives and WD offer a free version of the wizard disk.

  Clone the original 200 GB drive to the new drive.  To avoid problems, has chosen a 1.5 or 1 t T drive. Once you have the clone, just install the upgrade on the new drive. All your data will remain intact, and the intact original of 200 GB drive is secure.

  PS > you need a spare sata power and data leads to the clone. Look inside and see what led power is hanging loose. Then I can suggest an adapter or cable. As the DVD is IDE, (not Sata) from what I've read, you will need a Sata data cable also.

• HP Pavilion A14Ld-550 desktop: this office has a replaceable graphics card?

  The HP Pavilion 550 desktop computer - A14Ld has a replaceable graphics card? I often hear on an integrated graphics card, it is the question that I am trading for this model, and it has 4 GB memory graphics dedicated with AMD Radeon R5 graphics card and an AMD A8-6410 processor, 8 GB of memory and a 1 TB of HDD with Windows 8.1. So, is this model with the characteristics I've listed have his replaced graphics card?

  The answer is NO, because the HP is not a 550-A14Ld graphic slot PCIEx16. The actual GPU is anchored in the CPU chip. The concept is a like a laptop computer in a matter of funds. The real PSU (power supply) is really a brick 65W, very similar to a computer laptop power supply. I'm so glad you asked!

• can I change my graphics card? (iMac 27 end 2012)

  Can I change my graphics card? (iMac 27 end 2012)

  N ° it is a welded in the chip.  The only way to upgrade

  be replace logic card that contains a better GPU.

  With the cost and effort required, you may as well buy a recent

  iMac.

• 15 - AC603TU: if I can change my graphics card

  Can I change my graphics card... It has the graphics card Intel HD 520... What other graphics card are supported

  Hello

  No, you must change the architecture of the chip which means buying a new machine.

  Kind regards.

• NVIDIA Geforce Fx 5500 Graphics Card Driver Help in windows 7

  Hello

  I have a Nvidia Geforce Fx 5500 and default windows 7 installed graphics card "Standard VGA Graphics Adapter" now, I tried to uninstall and it said to reboot, but when I reboot it automatically installs the same vga graphics... I've installed the drivers and software from nvidia but the vga standard on wrinkles it graphics card... I tried to update the driver with the nvidia driver and it says the best driver for your device software is already installed windows has determined the driver software for your device is up to date... "graphic card vga standard" without appropriate drivers for my graphics card windows works like crud... I can do... I tried to stop the windows update automatically install device drivers and who did nothing... as soon as the computer restarted, it installed the driver vga... even in safe mode remains the same

  Thanks for your time

  There is no drivers Windows 7 for the GeForce FX 5500.

  You need a new graphics card. Until then, VGA Standard is all you can get.

• HP pavilion dv6 - 6163cl graphics card driver for windows 8.1

  Hello world.. !! I just upgraded from Microsoft Windows 8 Professional to Microsoft Windows 8.1 Professional, everything is fine except the display. The graphics driver is not installed after installing fresh Windows 8.1 Professional, although it worked perfectly with Windows 8 Professional. I use hp Pavilion dv6 - 6163cl Entertainment Notebook PC. Operating system is Microsoft Windows Professional 8.1 (64-bit). 6 GB of Ram and processor 2.3 Ghz. I tried to install Graphics Card Driver for Windows 7 64-bit, but it says "not a version supported." I did not go to the graphics drivers for Windows 8.1 for my PC. Help, please...

  Thanks for the reply and useful links. I downloaded the correct driver from the related city, it was for windows 8, I installed it and it gives the display a more sharp than before installation, but it was not as cool and sharp as it was in Windows 8 pre-installed. The text and any other presentation does not look much sharper and stronger as it should. so waiting for a new version of the display driver Windows Pro 8.1. Please answer and mention it in a link as soon as it is available for download.

  Cordially said.

• I changed my Apple ID online, but it has not changed on my iPad. Now, I can not sign into the iTunes store. How can I change my Apple ID on my iPad?

  I changed my Apple ID online because the email was no longer valid. However, my ID Apple has not changed on my iPad. Now, I can not sign into the iTunes store on my iPad. How can I change the Apple ID on my iPad?

  Tap your id in settings > iTunes and App Store and tap "sign out" on the context menu and connect you then back with the version update of your account. Similarly, if you use the same account, log in and return to iCloud, FaceTime, and Messages: what to do when you have changed your Apple ID email address or password - Apple support

• HP Pavilion g4: Mr President, I want to know if I can change my graphics card on my HP Pavilion g4 and which processor can I get

  Mr President.

  I want to know that can I change my graphics card on my laptop without changing the processor, and if I can't more the processor will be good for me to buy for high game and also please tell me what is the limit of ram on my laptop.

  I thank for your time, Mr. President, wish you good day.

  Hi Bro,

  Could you please help me with the serial number and the product number of the unit so that I could do my best to help out you.

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!