Upgrade path 5500 series ASA-SSM-10

Similar Questions

• the upgrade of IPS chains, ASA-SSM - 10 module

  I'll have a difficult time, the upgrade of the module ASA IPS SSM-10. I down loaded the IPS-GIS-s327-req - e1.pkg to the FTP Win XP (my workstation). The following does not work: http://download-sj.cisco.com/cisco/ciscosecure/ips/6.x/sigup/IPS-sig-S327.readme.txt

  "error: execUpgradeSoftware: connection failed. Any suggestion would be appreciated.

  Also, have you been able to update your signature?

• ASA-SSM-20/40 IPS Software upgrade quesiton

  I'm looking to upgrade the IPS modules (ASA-SSM-20 and ASA-SSM-40) on two different ASA to ver 7.1 (11) E4 under this field notice:

  http://www.Cisco.com/c/en/us/support/docs/field-notices/640/fn64080.html

  My question is around if traffic through the firewall is affected during this update and subsequent restart of the IPS module.

  On the ASAs, a service policy is in place that will allow the traffic in the case where the IPS module becomes unavailable.  It comes, it will actually happen during the update?

  Suggestions and comments are welcome.

  Thanks in advance.

  John

  If your IPS is inline and as a whole do not open then the traffic through the ASA (in assuming an ASA standalone and do not form part of a pair of HA) will not be affected when the service IPS module reload.

  If an SAA is in a pair of HA and a service (ips, cxsc, or sfr) module fails, it will be by default triggers a failover event. (ASA 9.5 introduces the possibility to change this behavior.) The result is the same - no service interruption (Although TCP connections may need to restore if you have not configured stateful failover).

• Cisco ASA 5500 Series 4-Port GE SSM

  Currently, we have 2 asa 5510 firewall and need to add the

  Cisco ASA 5500 Series 4 - Port GE SSM extension module. Can it be added when the device is turned on and running or the firewall must be turned off to install the plug-in?

  Hello

  You could try to ask this question of the team of firewall, as this page from the community for the physical security and video surveillance.  The team of firewall is located here:

  https://supportforums.Cisco.com/community/NetPro/security/firewall

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• Cisco ASA 5500 Series end of life

  Hello

  I noticed that all 5500 series (5510,5520,5540,5550,5580) ASAs are all end-of-life announced in March 2013. However, I don't see ASA 5505 on the list. Can anyone confirm that 5505 EOL has not announced?

  http://www.Cisco.com/c/en/us/support/security/ASA-5505-Adaptive-Security...

  Thanks in advance

  The 5505 is not yet announced EOS/EOL, but the announcement can * t be extreme as 5506-X will be available soon (well, I hope... ;-)).

• Upgrade to the controller of the 5500 series

  We currently have 5 4400 WLAN deployment series controllers in a school district and want to spend in the 5500 series. I do not know what are the best practices, but could deploy us a single controller 5500 series in one place to replace all the 4400's?

  Each site has a connection of Metro Ethernet 1 GB depending on the size of the school or 100 MB. Can I install a single 5500 and manage all the access points on the Wan or do we need one on each site? We currently only have 150 access points but are planning on growth in the future.

  It is for the most part depend on your traffic. If all of your servers and Internet are stored on your central site, there is almost no reason to have your controllers on your remote sites. However, if these types of resources are located remotely, you must leave the controllers out there.

  I've set up two types of drawings, and both are fine. Put a smaller controller at each remote location and a great couple on the central site provides a lot of redundancy. The 5508 also offers 8 uplinks, each 1Gig, providing more redundancy to the site itself.

  Your bandwidth is not at all a matter of concern, and the 5508 can support up to 250 points of access. I think that you have a good environment to deploy only the Central controllers, once again as long as your heads of traffic to your central site anyway for most applications. It is certainly very useful to have only a few controllers, instead of 5 or more to manage.

  In the end, there is no difference in the designs between 4400 s and 5500 s.

• recharge an ASA - SSM the firewall itself effect?

  We lost the connection information for the IPS - SSM on our ASA 5520. It seems we should re image module with a version more recent software. It is currently not in use i.e. no rules for it on the firewall. This process will take the firewall offline at all?

  Sh command output:

  See the module of Firewall03 # 1

  Model serial number of map mod

  --- -------------------------------------------- ------------------ -----------

  1 ASA 5500 Series Security Services Module-20 ASA-SSM-20 xxxxxxx

  MAC mod Fw Sw Version Version Version Hw address range

  --- --------------------------------- ------------ ------------ ---------------

  1 001b.0ce2.xxxx to 001b.0ce2.xxxx 1.0 1.0 (11) 2 5,0000 E1

  The Application name of the SSM status Version of the Application of SSM mod

  --- ------------------------------ ---------------- --------------------------

  1 FPS up to 5.1 (5) E1

  Data on the State of mod aircraft compatibility status

  --- ------------------ --------------------- -------------

  1 up Up

  Firewall03 # display module 1 recover

  Module 1 retrieve parameters...

  Start the recovery Image: No.

  Image URL:ftp://0.0.0.0/ t

  Port IP address: 0.0.0.0

  IP gateway address: 0.0.0.0

  VLAN ID: 0

  No, it should not affect the operation of the firewall at all. He would suffer only if you use it inline with firm failure mode is activated.

• IPS (7.0 (7) E4) on ASA-SSM-10 block DNS without alerts

  Hi all

  I have the IPS module:

  Build version: 1.1 - 7, 0000 E4

  ASA 5500 Series Security Services Module-10

  Update of the signature S652.0 2012-06-20

  Journal of the ASDM inferred events:

  4 June 26, 2012 18:21:47 193.227.240.38 53 IPS 65347 sd-out asked to drop the UDP packet from outside:193.227.240.38/53 to dmz1:sd - outside/65347

  But the IPS not deducted from alerts - it does not explain why blocking these packets. DNS requests cannot just one network.

  ! ------------------------------
  ! Current configuration last modified Tue Jun 26 18:01:58 2012
  ! ------------------------------
  ! Version 7.0(7)
  ! Host:
  !     Realm Keys          key1.0
  ! Signature Definition:
  !     Signature Update    S652.0   2012-06-20
  ! ------------------------------
  service interface
  exit
  ! ------------------------------
  service authentication
  exit
  ! ------------------------------
  service event-action-rules rules0
  filters edit PROXY
  attacker-address-range 192.168.72.7
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit Q00000
  signature-id-range 5684
  attacker-address-range 95.190.8.0-95.190.8.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit Q00001
  signature-id-range 5684
  victim-address-range 95.190.8.0-95.190.8.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit USERS
  signature-id-range 1102,5237,2152,5684,2100,5581,3030,6061,3030,11020,5403,5474,20020,60000-60100
  attacker-address-range 192.168.0.0-192.168.255.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit USERS2
  signature-id-range 5575-5591,2151,21619,2150-2151
  attacker-address-range 192.168.0.0-192.168.255.255
  victim-address-range 192.168.0.0-192.168.255.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters move PROXY begin
  filters move USERS after PROXY
  filters move Q00000 after USERS
  filters move Q00001 after Q00000
  filters move USERS2 after Q00001
  general
  global-deny-timeout 14400
  exit
  target-value low target-address 192.168.0.0-192.168.255.255
  target-value medium target-address 192.168.1.0-192.168.1.255,192.168.64.0-192.168.64.255,192.168.3.0-192.168.3.49,192.168.65.128-192.168.65.255
  target-value high target-address 192.168.72.2-192.168.72.254,192.168.66.0-192.168.67.255,192.168.2.0-192.168.2.255
  target-value mission-critical target-address 192.168.65.0-192.168.65.127
  os-identification
  calc-arr-for-ip-range 192.168.0.0-192.168.255.255
  exit
  exit
  ! ------------------------------
  service host
  network-settings
  host-ip 192.168.64.194/24,192.168.64.1
  host-name gw1-ips
  telnet-option disabled
  access-list 192.168.0.0/16
  dns-primary-server enabled
  address 192.168.66.2
  exit
  dns-secondary-server enabled
  address 192.168.72.19
  exit
  dns-tertiary-server enabled
  address 192.168.72.20
  exit
  exit
  time-zone-settings
  offset 360
  standard-time-zone-name GMT+06:00
  exit
  ntp-option enabled-ntp-unauthenticated
  ntp-server 192.168.64.1
  exit
  summertime-option disabled
  auto-upgrade
  cisco-server enabled
  schedule-option calendar-schedule
  times-of-day 04:20:00
  days-of-week sunday
  days-of-week tuesday
  days-of-week thursday
  days-of-week saturday
  exit
  user-name dimaonline
  cisco-url https://198.133.219.25/cgi-bin/front.x/ida/locator/locator.pl
  exit
  exit
  exit
  ! ------------------------------
  service logger
  exit
  ! ------------------------------
  service network-access
  general
  enable-acl-logging true
  never-block-networks 192.168.0.0/16
  exit
  exit
  ! ------------------------------
  service signature-definition sig0
  signatures 60000 0
  alert-severity low
  sig-fidelity-rating 50
  sig-description
  sig-name XPress Administrator Service
  sig-string-info Access to Administrator Service
  sig-comment External user open Admin
  sig-creation-date 20120622
  exit
  engine service-http
  max-field-sizes
  specify-max-uri-field-length no
  exit
  regex
  specify-uri-regex yes
  uri-regex [Aa]dministrator[Ss]ervice[.]asmx
  exit
  exit
  service-ports 80
  exit
  event-counter
  event-count 1
  event-count-key Axxx
  specify-alert-interval no
  exit
  alert-frequency
  summary-mode summarize
  summary-interval 15
  summary-key Axxx
  specify-global-summary-threshold no
  exit
  exit
  vulnerable-os windows-nt-2k-xp
  specify-mars-category yes
  mars-category Info/Misc/Login
  exit
  exit
  signatures 60000 1
  alert-severity low
  sig-fidelity-rating 50
  sig-description
  sig-name Xpress Bridge
  sig-string-info Service URL
  sig-comment External Access to bridge
  sig-creation-date 20120625
  exit
  engine service-http
  regex
  specify-uri-regex yes
  uri-regex [Bb]ridge[/][Ss]ervice[.]asmx
  exit
  exit
  service-ports 80
  exit
  event-counter
  event-count 1
  event-count-key Axxx
  specify-alert-interval no
  exit
  alert-frequency
  summary-mode summarize
  summary-interval 15
  summary-key Axxx
  specify-global-summary-threshold no
  exit
  exit
  status
  enabled true
  exit
  specify-mars-category yes
  mars-category Info/Misc/Login
  exit
  exit
  signatures 60001 0
  alert-severity high
  sig-fidelity-rating 90
  sig-description
  sig-name FreePBX Display Extentions
  sig-string-info Acces to Extentions settings
  sig-comment Weak Password Detection
  sig-creation-date 20120622
  exit
  engine service-http
  event-action produce-alert|deny-attacker-inline
  regex
  specify-uri-regex yes
  uri-regex [/]admin[/]config[.]php
  exit
  specify-arg-name-regex yes
  arg-name-regex display
  specify-arg-value-regex yes
  arg-value-regex (extensions)|(trunks)
  exit
  exit
  exit
  service-ports 80
  exit
  event-counter
  event-count 1
  event-count-key Axxx
  specify-alert-interval no
  exit
  alert-frequency
  summary-mode summarize
  summary-interval 15
  summary-key Axxx
  specify-global-summary-threshold no
  exit
  exit
  exit
  exit
  ! ------------------------------
  service ssh-known-hosts
  exit
  ! ------------------------------
  service trusted-certificates
  exit
  ! ------------------------------
  service web-server
  enable-tls false
  port 80
  exit
  ! ------------------------------
  service anomaly-detection ad0
  internal-zone
  enabled true
  ip-address-range 192.168.0.0-192.168.255.255
  tcp
  enabled true
  exit
  udp
  enabled true
  exit
  other
  enabled true
  exit
  exit
  illegal-zone
  enabled false
  tcp
  enabled false
  exit
  udp
  enabled false
  exit
  other
  enabled false
  exit
  exit
  ignore
  source-ip-address-range 192.168.0.0-192.168.255.255
  exit
  exit
  ! ------------------------------
  service external-product-interface
  exit
  ! ------------------------------
  service health-monitor
  signature-update-policy
  enable false
  exit
  license-expiration-policy
  enable false
  exit
  event-retrieval-policy
  enable false
  exit
  exit
  ! ------------------------------
  service global-correlation
  exit
  ! ------------------------------
  service aaa
  exit
  ! ------------------------------
  service analysis-engine
  virtual-sensor vs0
  physical-interface GigabitEthernet0/1
  exit
  exit
  

  I confirmed with the Ironport team that this IP is a bad host in sensorbase. This is the reason for the traffic of this host being removed. There could be several reasons for this subnet to the list, for example, it could be part of a controlled host known by spammers. You must reach out to the development team for a confirmation however.

• ASA-SSM-10 improvement no license or signatures

  I successfully upgraded our ASA-5510 with the latest version of the software.

  Our IPS module however ASA-SSM-10 seems to be the settings to factory default with only an IP address that is configured without any permission or certificates. The ASA-SSM-10 module can be improved with the lack of licenses or certificates? In addition, by using PuTTY I am able to connect to the ASA-SSM-10 module and ping the module and my laptop that I have connected via the management port. I am unable to ping from the laptop to the module of ASA-SSM-10 well.

  Continuing the investigation in addition to the configuration of the management port IP address there is no VLAN, GW, image url or ip address of the configured port. Is there a simple way to upgrade the software on the ASA-SSM-10 without affecting our two ASA - 5510 that are configured for failover?

  I suppose I can do up to a VLAN, GW and port address to get my cell phone to ping to the ASA-SSM-10 module to upgrade without affecting our ASA-5510 that are configured for failover. ***

  You can attach more licenses for the legacy IPS until April 26. But the question is whether it is worth spending time and money in the present. The IPS legacy is dead and you should focus on firepower for IPS. But who does not work on your hardware.

• Cisco ASA-SSM-20 analysis engine error...

  I get this error on my IPS, I restarted the couple times sensor but it stops again and signature updates do not move during this time, or it looks like.  I've heard great Cisco ID: CsCuc34812 but there isn't really any information available on this subject.  Any another race ASA-SSM-20 has experienced this problem and managed to resolve it?

  

  

  Hello

  All sensors should have a virtual sensor attributed to them, so they can inspect the traffic.

  I have connected the IPS2 and ran the following commands to assign the virtual sensor

  service-analysis engine

  vs0 virtual sensor

  physical interface gi0/1

  That's right!

  I guess that's how it should be?  How 2 IPS has managed to send me notifications if there is no virtual sensors assigned to him?

  We need to determine the type of notifications witch was the sending IPS (could be linked to the IPS himself, system notifications)

  Is there a CLI to confirm the IPS is active?  I have to assume that my upgrade caused these problems?

  The SAA

  Do sh-service policy and determine the number of packets is exchanged between IP addresses and ASA

  Kind regards

• Update license of IPS ASA - SSM

  Hello

  We have an ASA-SSM-20 IPS, the license has expired and we purchased a Smartnet contract for the device.

  I would like to know how to upgrade the license.

  We tried to do the ASDM, and chose the option updates to cisco.com.we got the following error.

  internal error. Unable to send the license request. -4: unable to proxy transparent tunnel. Proxy returns "HTTP/1.1 403 Forbidden.

  How to solve this problem or how to do when you use the other option, how to get the license file.

  Best regards

  It seems that your AIP-SSM20 is configured to use an http proxy to connect to the Internet. If you allow the IP address of the AIP-SSM20 management in your web proxy, it may solve your problem.

  If this isn't the issue, you can always apply a license manually. Download your license file here:

  https://Tools.Cisco.com/swift/LicensingUI/home

  and apply via the ASDM or the CLI

  -Bob

• Impossible to reinstall XP, error «...» Windows is not a supported upgrade path"

  Computer is 2001 Sony Vaio apparently infected Office who knows what, if I want to do a clean install of the operating system. The computer came with Windows ME and a drive to upgrade to XP. 5 years, a technician thought he was doing me a favor and installed without my knowledge its own XP Pro.

  I tried to do an installation of my upgrade XP disc but I get this message: Setup is impossible to pass your current installation of Windows XP. Your current Windows installation is not a supported upgrade path. Setup cannot continue.

  I also tried to use the Sony system recovery CD, but it does not work.

  Help!

  Hi IAMSOBZ,

  As you install the operating system from a CD to upgrade it you will be asked for support of qualification, you can insert your Windows Millennium Edition or any CD which is an edition less than Windows XP Professional.

  Important: You will need to have a CD of Windows 98/Me/2000 eligible to insert if you are using a version update of XP to clean install. OEM restore disks will not usually fill the eligibility standard. If the restore disc i386 folder, it will work normally.

  a. start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

   

  Note: To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  b. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.

  c. once the Welcome to Setup screen, press ENTER to start Windows XP Setup.

  d. read the Microsoft software license agreement and press F8.

  e. Setup will scan for previous Windows installations

  f. you will need to replace the CD of XP with your qualifying CD; XP Setup will scan the qualifying CD and ask you to replace it with the XP CD to continue installing XP.

  g. complete the installation

  You can refer the link to find out how to install Windows XP below: how to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IDRAC6 upgrade path

  I am temporarily caring for a Dell PowerEdge T610 purchased in 2012.  Our outsourced IT Department walked me through some maintenance tasks, including required launches a Virtual Console through iDRAC6. Apparently my iDRAC6 version (V1.80) is so old, no modern browser it supports fully. What I have for the most part works with Chrome and FireFox, not IE (but it's OK - I don't work with IE either).

  I am trying to determine if a firmware upgrade path exists for my hardware, and if so, what are the steps. None of my research on the Dell Web site have meaningful results. Since my system is no longer under warranty I don't get a lot of help by telephone, and "cat" is denied for me as well.

  If anyone can point me to a good place to get started which would be a great help.  Thank you!

  Hello.

  See the upgrade below. First apply the BIOS, then the respective DRAC6 firmware.

  6.2.3 BIOS iDRAC6 v1.92                   

  BIOS 6.3.0 iDRAC6 v1.95                  

  BIOS 6.4.0 iDRAC6 v1.97, iDRAC6 v1.99 , and iDRAC6 v2.8.0                  

  The path of update will prevent iDRAC communication and other server issues.

• ASA-SSM-20 on the active failover configuration

  You can synchronize configuration between two IPS systems data?

  I have two ASA-SSM-20 (6.1.1 E3) one in each of my the SAA. Of the SAA is the shift in assets. During the configuration of the IPS module I always make these same changes also in the standby unit. Is it possible to synchronize to the top of these two survey periods, so when it is configured the other is updated?

  Thank you very much

  Unlike the SAA, there not an automatic function to preserve the configuration synchronization through SSMs 2.

  A few options:

  You can use the command copy to copy the configuration of a sensor to a ftp/scp server.

  Then use the copy on the second sensor command to copy the configuration on the second sensor. During the copy, it will ask whether to change the IP of the probe to what is in the configuration file. You will need to tell it to NOT change IP of the probe, otherwise you end up with 2 SSMs with the same IP address and are struggling to connect to them.

  Another option is to use the CSM. CSM has configuration that applies to simple sensors, but also the group configuration that can be applied across multiple sensors.

  If you have used the group configuration, then you could make one change to the configuration of the Group and apply it in all the sensors in the Group (you will place your SSMs 2 in the same group).