Upgrade Photoshop requires a previous installation?

Similar Questions

• How to upgrade photoshop after a new installation?

  Hello

  I own a licensed version of Photoshop CS 5.1.

  Due to a virus, I had to format my hard drive and erase Photoshop. I reinstalled windows 10 and then downloaded Photoshop CS5 64-bit. CS5 installation went well. Installation is finished and enter my license key and activation of Photoshop. However after the activation step, I could not update or download the updates to my installation of CS5, bridge, camera raw etc...

  Some updates could not be installed

  Cannot install following updates. If you want to install these updates, fix the issues below and try again:

  Adobe Bridge CS5 update 4.0.5

  There was an error downloading this update. Quit and try again later.

  CS5 Adobe Extension Manager 5.0 updated

  There was an error downloading this update. Quit and try again later.

  Update of Photoshop to Photoshop CS5 12.0.4

  There was an error downloading this update. Quit and try again later.

  Photoshop Camera Raw 6.7 update

  There was an error downloading this update. Quit and try again later.

  I tried several times but the problem persists. How can I solve this problem. Help, please.

  Hello

  Please see the following links:

  Troubleshoot update | CS5, CS5.5, CS6

  CS5 UPDATE FAILS: there was an error downloading this update

  Let us know if that helps.

  Kind regards

  Bani

• Dotnet 4.0, cannot be upgraded - "Setup cannot continue because a previous installation requires your computer needs to be rebooted...» »

  original title: Dotnet 4.0, cannot be upgraded.

  I need help on problem mentioned below, the error obtained when upgrading to 4.0 on XP with SP3 dotnet even machines with and without the dotnet 3.5 installed.

  "error: Setup cannot continue because a previous installation requires your computer needs to be restarted." Restart your computer and run the Setup again.

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=17851

  http://www.Microsoft.com/downloads/en/default.aspx

  For reference:

  How to reset the Windows Update components?

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• CS6 Upgrade on Win7 64 bit installation issues

  I bought the upgrade to CS4 CS6 Design and Web Premium versions.  I tried 4 times now to install, with varying degrees of success.  The first attempt installed nearly half of the products and gave a list of egregious errors. The second installed everything except Acrobat and InDesign. Subsequent attempts to install only these two additional programs always give a "Setup Failed" and a seemingly common problem through all the latest versions and operating systems of the Installer do not access to certain files/folders.

  EDIT: The installer has also always said that the machine needs to reboot, when it comes to be restarted and certainly does not!  I continue anyway.

  I already deleted the Temp folder with no difference, and NIS2012 is disabled during installation.

  Any ideas of how to get these last two vital programs to install please?

  My last setup log is:-

  Exit code: 7

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF024, DW063...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 52 (s), 0 warning (s)

  -Payload: {539AEF15-3A2B-4A31-A587-7E90F7D9C700} camera profiles Installer 7.0.0.0 -.

  ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common {539AEF15-3A2B-4A31-A587-7E90F7D9C700} \_464_81cd902968d7 fd801cbc3330bb0e41b9" to "C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Canon EOS - 1Ds Mark II\Canon EOS - 1Ds Mark II camera Standard.dcp" error 32 the process cannot access the file because it is being used by another process. (Seq. 464)

  ERROR: DW063: ARKMoveFileCommand of command failed. (Seq. 464)

  -Payload: {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite shared Configuration CS6 3.0.0.0 -.

  ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common {8706963D-5F48-47CC-998B-DAB70B089DB8} \_29_fe89ef03bbfb8 68d96427c4cc0f8ec2a" to "C:\Program Files (x 86) \Common ' error 32 the process cannot access the file because it is being used by another process. (Seq 27)

  ERROR: DW063: ARKMoveFileCommand of command failed. (Seq 27)

  ERROR: DF024: cannot restore the file in "C:\Program Files (x 86) \Common Files\Adobe\ssc\CreativeCloud-CS6-Mac-GM\SLConfig.xml" from backup to 'C:\adobeTemp\backup\adobetmp04669361' error 32 the process cannot access the file because it is being used by another process. " (Seq 2)

  ERROR: DW063: error to reverse the order ARKDeleteFileCommand (Seq 2)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe XMP panels: installation failed

  ERROR: DW050:-AdobeColorCommonSetCMYK CS6: installation failed

  ERROR: DW050:-AdobeColorEU CS6: installation failed

  ERROR: DW050:-Adobe Toolhints CS6: installation failed

  ERROR: DW050:-AdobeColorJA CS6: installation failed

  ERROR: DW050:-Adobe InDesign CS6 icon Handler x 64: installation failed

  ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: installation failed

  ERROR: DW050:-Installation of common fonts required: installation failed

  ERROR: DW050:-Adobe Player for embedding 3.3: installation failed

  ERROR: DW050:-Adobe CSXS Infrastructure CS6: installation failed

  ERROR: DW050:-CS6 Design and Web Premium: installation failed

  ERROR: DW050:-AdobeColorNA CS6: installation failed

  ERROR: DW050:-DPS Desktop Tools CS6: installation failed

  ERROR: DW050:-camera profiles Installer: installation failed

  ERROR: DW050:-AdobePDFL CS6: installation failed

  ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: installation failed

  ERROR: DW050:-Adobe Hunspell Linguistics Plugin CS6: installation failed

  ERROR: DW050:-CS6 settings PDF: installation failed

  ERROR: DW050:-CS6 Adobe Extension Manager: installation failed

  ERROR: DW050:-NPS Adobe Panel: installation failed

  ERROR: DW050:-Suite Shared Configuration CS6: installation failed

  ERROR: DW050:-Files_AdobeInDesign8AppLang-fr_FR CS6 Application Adobe InDesign language: installation failed

  ERROR: DW050:-Adobe WinSoft Linguistics Plugin CS6: installation failed

  ERROR: DW050:-Adobe Bridge CS6: installation failed

  ERROR: DW050:-Microsoft Visual C++ 2008 Redistributable Package (x 64): installation failed

  ERROR: DW050:-Microsoft Visual C++ 2008 Redistributable Package (x 86): installation failed

  ERROR: DW050:-Package redistributable Microsoft Visual C++ 2010 (x 64): installation failed

  ERROR: DW050:-AdobeTypeSupport CS6: installation failed

  ERROR: DW050:-core files common Adobe InDesign CS6: installation failed

  ERROR: DW050:-Acrobat Professional: installation failed

  ERROR: DW050:-Adobe InDesign Feature Set Application files CS6: installation failed

  ERROR: DW050:-Adobe Mini Bridge CS6: installation failed

  ERROR: DW050:-AdobeColorCommonSetRGB CS6: installation failed

  ERROR: DW050:-standard Adobe 2.0: installation failed

  ERROR: DW050:-Basic Application of the CS6 Adobe InDesign files: due to a lack of Language Pack installation

  ERROR: DW050:-Photoshop Camera Raw 7: installation failed

  ERROR: DW050:-AdobeHelp: installation failed

  ERROR: DW050:-Adobe CS6 language: installation failed

  ERROR: DW050:-Installation of recommended common fonts: installation failed

  ERROR: DW050:-DynamiclinkSupport: installation failed

  ERROR: DW050:-AdobeCMaps CS6: installation failed

  ERROR: DW050:-Adobe CSXS Extensions CS6: installation failed

  ERROR: DW050:-Adobe InDesign CS6 icon Handler: installation failed

  ERROR: DW050:-Adobe ExtendScript Toolkit CS6: installation failed

  ERROR: DW050:-Adobe Media Encoder CS6 X 64: installation failed

  ERROR: DW050:-Adobe InDesign Application Base Files2 CS6: installation failed

  -------------------------------------------------------------------------------------

  THX

  Colin

  Post edited by: cdyckes

  It seems that if you have a very similar problem to the one I had before you run the cleanup utility (that you ran).

  I finally got my Acrobat to install by running again the installation, accepting the single selection Acrobat and, then, the important thing for me, using a BACK level administrator window command to deliver a "net stop spooler"to the point that the Adobe installer said it was "stop services system" and then, a little while later , a "net start spooler" when he said he tried to re - start.

  He got the product in version installed and work, but, unfortunately, the same trick does not work when I run the update, so I am stuck currently impossible to install any security (or other) updates for Acrobat X.

  I'm sure this has something to do with the appropriate rights to start and stop system services and wish just that Adobe would allow individual installers run explicitly so that they have the appropriate privileges.  Unfortunately they do not, probably to make sure you install the entire suite on a single machine, but their online activation should covering anyway.

  I must say that I am disgusted that a product at this price level could have a such laminated Installer!

  Sorry I can't help with your problem. I suggest that you create a fresh desired thread as this one seems to have been pushed to the bottom of the stack.

  Colin

• Why a shortcut for Microsoft Update doesn't appear in the start menu as it always has in previous installations?

  In this latest new installation of Windows XP Pro when I upgraded from Windows Update, Microsoft Update no item does appear in the start menu in previous installations? Can I remove Microsoft Update and then reinstall it? Can I manually install the shortcut? I'm comfortable editing the registry.

  Off topic, I know, but you can work some magic for another problem. When I boot, when half of the icons appear in the notification area, I get a message that Windows Firewall is disabled. After the last icons appear, the message disappears and the firewall turns on again. It's annoying, and I'd love to [repair]. Thank you.

  Assuming that the message "the Windows Firewall is disabled" comes from the Security Center (Windows), looks like you see what we call a "race condition". Essentially, Security Center is loading before the Windows Firewall was fully charged (may be due to the amount of NAV system resources then uses what he loads and runs his own control over the firewall).

  Until the warning goes away in a few minutes, don't worry, you see a normal behavior (for Windows XP).

• Help, windows 7 upgrade advisor requires the removal of the player engine.

  Help, windows 7 upgrade advisor requires the removal of the player engine. I removed the Rhapsody, but it is still asking deletion. NOTHING I can find in my computer associated to Real Player. So please don't tell me no "Uninstall" that there is no evidence in the Uninstall list. Unless it is somewhere else. So, how can I continue my effort to upgrade to Windows 7? I tried twice already and he goes all the way to the end and then says installation failed and he returned to Vista. I have Vista Home Premium.

  Hello

  I suggest you to follow a few troubleshooting steps to solve the problem on your computer.

  Method:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-in/Windows-Vista/delete-files-using-disk-cleanup

  If it still asks the suppression of Rhapsody then I suggest you to contact forums Real player for further assistance.

  Hope this information helps you.

• How to disable a previous installation of Lightroom 6 on a computer that no longer works?

  I have an iMac with Lightroom installed 6. My old computer, also an iMac, had 6 installed Lightroom. The old computer has hard disk problems and won't open Lightroom 6 so I can't disable this facility. Now, I get a message that I need to disable the previous Lightroom 6 installations when I open the program on my new computer. How to disable a previous installation of Lightroom 6 so I have the computer on which it is installed is not functional? I'm only using Lightroom 6 on a computer, my new iMac. Please notify.

  Here is the registration information for my 6 Lightroom from Adobe's Web site:

  Name of the product Serial number Version Platform Registration date Adobe Photoshop Lightroom Never send a serial number on a public forum, mod 6.0 Several May 29, 2015

  [serial nr removed by mod]

  Contact Adobe Live Chat

• I installed Adobe Creative Suite on an external drive. I want to upgrade to CS3, but the installation of CS3 disc wonder the CS4 master drive.

  I installed Adobe Creative Suite on an external drive. I want to upgrade to CS3, but the installation of CS3 disc wonder the CS4 master drive. I can also select the disc I want to move on. Anything wrong here?

  When you start the installation of your cs3 and enter your serial number for cs3, the installer should detect it is a update the serial number and you present a list of products (where you could have improved) eligible.

  Select the previous product (what you own) and you will be asked for the serial number of the previous product.

  Enter the correct number at the right time and to proceed with the installation.

• Error 1720. There is a problem with this windows package install. a script required fpr this installation to complete could not be run.

  Error 1720. There is a problem with this windows package install. a script required fpr this installation to complete could not be run. Contact your provider to support personal or package. action Coustom DelAppData error script-2146828283. Argument or appeal of Microsoft VbScript runtime error: invalid procedures: "Left" line 22, column 1.

  Contact the technical support for the program that you are trying to install. MS - MVP - Elephant Boy computers - don't panic!

• Upgrade for a Netbook XP installation problem

  I have a netbook (with no optical drive) on which I want to install Windows XP Home Edition.

  The drive I have is an upgrade version.

  The problem I have is that for some reason, the Netbook (even if the BIOS allows) will NOT start from an external DVD/CD drive, even when started he sees the drive and you can use it. Other computers boot this drive so I don't know what the problem is.

  I can obviously do a flashdrive bootable for installing XP - my concern is to provide the eligible product if the external optical drive is a little dubious - I have a copy of Windows 98 Second edition on a disc, which is a product qualifies for the upgrade.

  If the installation process does not see the CD drive when I am asked to insert the product calling it, how can I get around that?

  I tried a Windows 7 disc - would not start from that.

  I tried to boot from a floppy from Win 98 and formatting the HARD drive - still did not start.

  Finally, I started from a flashdrive bootable Ubuntu 10 and used GParted to delete the partition and recreate a partition FAT32 and Hey Presto! The cd of Windows XP started...

  In the process of installing XP as I write this.

  Thanks for the help!

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• When I try to install iTunes, I get this error: "there is a problem with this installation package. a program required for this installation could not be executed.

  He said: "there is a problem with this installation package. a program required for this installation could not be completed, contact your provider of batch

  original title: itunes is not installed.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see the links and check.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  See also:

  Solve problems with programs that cannot be installed or uninstalled http://support.microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I also suggest you to contact the Apple support and check.

  http://www.Apple.com/support/

• Replace my old data on previous installation of vista.

  My pc no longer starts (Vista has not started). They advised me to reinstall vista, which I did, but no, I can't go back to my old data on the previous installation of vista. Any help how to recover this data?

  Hello

  You have a small chance to recover some files from the previous Installation, in operation since how long did happen.

  There have been reports here come back to some success after this program is recommended to be used in similar circumstances to yours.

  http://www.Piriform.com/Recuva

  See you soon.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.