Upgrade RAM iMac 27 5 k 2014

Similar Questions

• After upgrade ram, iMac start 3 beeps

  Hi guys, I try to improve my ram from 8G to 32G with the new memory locations.

  It went very well. I was put in place the RAM and it worked very well.

  I put my PC on sleep, and then I wake up with strange beeps. I had to stop. I try to start it again, only of the white screen with 3 beeps again.

  I try different combinations for the positions of machines slot (2 first sites works well) if I put memory on the slot 3 or 4, it's getting the beep, no matter what.

  Please let me know for your solution.

  3 beeps mean you have Ram problems:

  is not well mounted in the mac,

  or if you have the plug incorrectly installed.

  Remove the new Ram, restart.

  Then, check the specs.

• To upgrade my iMac 27 "to the end of 2013

  To upgrade my iMac 27 "to the end of 2013, that I must have only in 8 GB, 16 GB or 32 GB? Or for example, I add two 8 GB to the two 4 GB that are already on it, which would make 24Go? Please could someone with experience on this technical question to me, and others know if it is the right thing to do or not, thank you.

  You can improve to 24 GB if you want, that's how my 2011 27 "model and it works perfectly. If you upgrade the RAM please only use OWC (www.macsales.com) or critical (direct purchase). The reason is iMacs are sensitive to the brand or RAM cheap offshore. Both OWC and Crucial sell high quality RAM at reasonable prices and impeccable service.

• 2x8Gb 2x4gb upgrade for iMac vs 2 x 4 GB

  Hello

  I want to upgrade my iMac (retina 5K, 27 inches, end of 2015), add more RAM.  Since it is a bit expensive for me to go full 32 GB upgrade atm, I'm trying to decide the configuration of the DIMM modules to fill in the blanks.  I kind of want to go to 24 GB be sure, but I'm not sure this is a solution of zero downside.  Search Google on the subject was rather confusing for me and advice to support Apple (' go for 2 x 4 GB, to make sure [a few shoo-shoo techniques] ") was the opposite of what the service recommended by them Center offered me ("go to 2x8GB, its fine totally"), where my question:

  Y at - it nothing wrong with adding 2x8Gb DIMM to 2x4gb existing over configuration 4x4Gb?  What is it precisely?

  Thanks in advance for any help!

  Long as you order the correct RAM also there is no mixture 2x8GB with 2 x 4 GB problem.

• How to upgrade RAM memory?

  It comes to my specifications specifications:

  ASUS - X450CC double hearts 2117U

  -2 GB RAM / HDD500Gb

  -GPU Gforce GT720M

  -Windows: Win 7 64-bit Home Basic SP1 OEM original its license (updated)

  (I used the new Asus X450CC driver for Win 7 update of 2014)

  My request:

  -Can I upgrade RAM memory with the addition of 8 GB of RAM? and how much RAM can be read by the system?

  (Before, thanks for the reply...)

  =)

  No, you can up to 8 GB of RAM as follows: 4 + 4 GB is if you can increase the initial 2GB in slot 1 to 4 GB, and then add an another 4 GB.

  I suggest you also contact ASUS Technical Support: http://support.asus.com/contactus.aspx?SLanguage=en

  J W Stuart: http://www.pagestart.com

• to upgrade my iMac yosemite Sierra do I need save iWork applications first and upgrade etc.?

  To upgrade my iMac Yosemite Sierra can I first of all backup and upgrade the iWork etc. applications. ?

  He can't make a backup.  You don't need to do anything else.

• I upgraded my iMac to el capitan and imovie lost. It does not try to reinstall it from the App store.

  I upgraded my iMac to el capitan and imovie lost. Reinstalling the app store doesn't seem to work. I hit "Aktualisieren" and looks like the transfer starts, however the program is not installed.

  Since I imovie 9.0.9 my programs folder I am currently using this version and try to find a solution to get back to the version 10.1.2

  iMovie is not part of an installation of El Capitan. So, if you did a clean install of El Capitan, it will not be installed.

• is it possible to use S of HD60 Elgato on imac 21.5 (mid-2014) game screenshot

  Hello

  I want to use a game named the Elgato capture system capture HD60 S games on my imac 21.5 (mid-2014).

  is this possible?

  Elgato Capture HD60 S game record gameplay on the PS4. the video could be edited on the imac?

  Greetings Robin

  Ask Elgato support:

  https://help.Elgato.com/customer/portal/emails/new

  C.

• I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all

  I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all.

  I don't understand what you mean by "I can't... bus in 1333 was dominated by the toi.cam.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Upgrading RAM on Satellite P30 141

  Hello

  Is it possible to upgrade memory on a pro Satellite p30?

  I am currently having 512 MB of RAM and would like more (maybe another 512 or 2 x 1 GB)

  can be upgraded RAM on this satellite?
  Anyone know how to find out?

  Thank you
  brand

  Post edited by: fairness4fansCoUk

  Satellite Pro 141 is not known to me and I guess that the number is not entirely correct what laptop do you have exactly?

• HP ENVY 23-d107er: upgrading Ram and processor

  I want to upgrade RAM, up to 16 Gb. Help me, please - I don't understand how to set the compatibility of frequency and CASE latency of RAM and motherboard (sorry for my English). My motherboard frecuancy is a...

  Memory how much my motherboard support?

  Can I install DDR4 memory or not?

  Or "the best"type of memory is DDR3L?

  SO-DDR3 16 GB (2x8Gb) PC15000 - 1866 MHz Kingston HX318LS11IBK2/16?  -1866 MHz frequency

  If my choice is wrong, maybe I could install this (also DDR3L) RAM:

  16Gb (2x8Gb) SO-DDR3 PC12800 1600 MHz Kingston CL9 HyperX HX316LS9IBK2/16 Impact black? -1600 MHz frequency

  or

  Kingston HyperX Impzact [HX316LS9IB/8] SODIMM?

  And could you give me a tip of advise on upgrading the processor?

  The only choice is i7 - 3770 s?

  Hi there @_Alexei_,.

  Welcome to the Forums of HP Support!  I understand that you are looking for more information on CPU and RAM upgrade options for your computer.  I'm happy to help you with this.

  Looking at HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-NK (Lavaca3-SB) for your computer, it lists the upgrade RAM and CPU information.

  Here is the information of supported RAM:

  Dual channel memory architecture two DDR3 SO-DIMM (204) media pins
  PC3-10600 (DDR3-1333)
  PC3-12800 (DDR3-1600)
  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SO-DIMM (8 GB only available on systems using processors Ivy Bridge)

  Supports up to 16 GB on 64-bit computers (only available on systems using processors Ivy Bridge 16 GB)
  Supports up to 4 GB on 32 - bit * PC * PC 32-bit cannot resolve a full 4.0 GB memory.

  Also, here is the CPU of the same document information:

  TDP: Varies according to the processor
  Socket type: LGA 1155
  The motherboard supports the following processor upgrades:
  Intel Core i3-3xxxT (Ivy Bridge) Dual Core up to 35W
  Intel Core i3-3xxx (Ivy Bridge) Dual Core up to 55W
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core up to 35W
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core up to 45W
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core up to 65W
  Intel Core i3-2xxx (Sandy Bridge) Dual Core up to 65W
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core up to 35W
  Intel Core i7-2xxxS (Sandy Bridge) Quad Core up to 95W
  Intel Core i7-3xxxS (Ivy Bridge) Quad Core up to 65W
  G6xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
  G6xxT Intel Pentium Dual Core (Sandy Bridge) up to 35W
  G8xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
  G20xx Intel Pentium Dual Core (Ivy Bridge) up to 55W

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Tecra Z40 - A - the upgrade (RAM RAM)

  Hi all

  Ordered little RAM to upgrade my Toshiba Tecra Z40 - A, but can not find, for the life of me, anything where you want to insert online.

  I previously installed RAM under the keyboard (couple of clips holding it) and on the other, a small cover on the bottom, but the Z40 does not appear to be anywhere easily accessible.

  Has anyone upgraded RAM on the Z40? Or is it a big no, no, because of the guarantee?

  Thank you
  Lance

  Memory upgrade on this model Tecra is a bit complicated and, in my view, should not be done by the owner of the laptop. For some models of Ram upgrade can be done by the owner of the laptop and exact instructions how do proposed in document s user manuals, but not for your Tecra.

  For full access to the RAM modules lower lid should be removed and it can be done by people of service only. If you do this alone you can void the warranty valid.
  I recommend you contact the nearest Toshiba service provider in your country and ask for help or advice.

• upgrade ram from 4 GB to 8 GB of macbook pro mid 2012 will increase performance?

  Upgrade ram from 4 GB to 8 GB of macbook pro mid 2012 will increase performance?

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• Portege 4000 - upgrade RAM & graphic card driver installation

  I'm having some trouble with my Portege 4000 for the moment. I installed XP on a disk, but will no longer have that I have 256 MB of RAM...

  -Have you tried 2 manufacturers but the PC133 512 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  -Consider the options alternative to XP, 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?

  -J' put another post for .exe drivers related to the display/vga for 98SE and 2000.

  -Just for the record, not all Linux distributions seem to go back on the size of the screen, so it takes some work...

  Thanks much for any help.

  > Tried 2 manufacturers but the 512 PC133 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  The protégé 4000 is compatible with the PC133 modules! AFAIK, you can upgrade RAM of this notebook 1 GB (1024 MB) and you can use these modules;
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

  > Considering alternative options to XP, namely 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?
  You can create partitions on the HARD drive using a 3rd party like Partition Magic 8 tool. I use this tool and it's really nice.
  After you create 2 or three partitions on the HARD disk, you could install different OS (operating systems).