Upgrade RAM or OSX first?

I want to speed up my end 2011 MacBook Pro by adding RAM (4 GB to 8 GB) and update of Lion to El Capitan.  No matter what I do first?

Is not really important, but ElCapitan OS X works better with 8 GB of RAM installed.

Backup the Mac before you upgrade to OS X.

Best.

Tags: Notebooks

Similar Questions

  • Upgrade ram A60 - need help please

    I hope that I will find closure to a long saga Finally, since late September, I looked to upgrade my Equium A60 memory, first of all, I ordered a microdirect Office ram chip (I know I know, really stupid thing to do...), then I ordered the good chip (from microdirect), but it did not work, I recently bought RAM from amazon , but they sent ram stones which, when it is too big for my expansion slot, and when I got the RAM, they sent me the same chip that I received before

    I was ordering pc2100 512 MB SO - DIMM 200 pin, 266 MHz, which has been previously compatible comfirmed in you many on these forums.

    now, I found the ram chip to the: http://www.crucial.com/uk/store/MPartspecs.Asp?mtbpoid=FF2F2894A5CA7304&WSMD=Equiu m + series + A60 & WSPN = CT419100
    crucial who say are compatible, but it is pc2700,.

    This chip compatible, or good crucail evil?
    are also critical a company worthy of confidence to buy online?

    Congratulations to all the

    Hey Jake,

    I can't comment on Crucial given that I have no first hand experience of their products or services, but I used upgrades RAM of Orca logic in the past with no problems at all (I currently have two of their RAM modules in my SA30).

    Their web site has a Finder memory, then I'd say comparing your RAM specifications with Orca. The URL is: -.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=14209&ft=m&St=3

    Kind regards

  • Upgrading RAM on Satellite L555-10R

    Hello

    I have a satellite L555-10R, Win 7 64 bit, main Board TOSHIBA KTWAA Intel GM45/GM47 chipset, 1.9 BIOS, CPU Intel COre 2 duo P7450;

    I want to upgrade ram 2x2gb (SAMSUNG) to 2 x 4 GB (CORSAIR). Only the ram that I put in the location #1 is recognized as a result system starts and detects 6 GB of RAM. When I put the RAM 2nd Slot #2, the PC does not start. It seems that it does not detects hard (the LED on the front of the PC don't not ligth during startup). I can't go into the BIOS (even if I press the F2 key), black screen, all I can do is power off.

    I'd appreciate your help, if you have an idea.
    Thank you

    VLM

    Hello

    First some general information on your machine:
    Your laptop can be upgraded to the top 8 GB and max upgrade, you can use both modules of memory of 4 GB.
    Compatible 4 for GB DDR3 - 1066 MHz apart number PA3677U-1M4G. Module of memory with this part number is tested and 100% compatible with your device.

    If you check this forum you will find number of threads as your one, where people try to level of RAM using Rams Corsair and spoke of the same problems. Obviously the reason for non-working machine is compatibility issue with these RAM modules.

    The 'value' Modules of RAM use many markets good chips using several banks/channels, which can cause problems of compatibility with some chipsets/CPUS.

    I highly recommend to use high quality and 100% compatible modules of RAM from Toshiba or Kingston.

  • Aspire upgrade ram M5 - 583p

    Hello world
    I would like to upgrade ram to my m5-583p-5859, it came with 6 GB of ram and there is one slot of ram, according to specifications, the maximum ram can be installed 12 concerts, so I want to know if there is ram come 12 GB as single stick and if not can I install 16 gb and it work very well and where I can get it.

    Sorry for the bad English so it is not my first language and thanks in advance.

    To complete the answer to the brummyfan2:

    Your laptop supports up to 12 GB - DDR3L - 1600 MHz (1x8Gb + 4Gb onboard).

  • CC 7100 cmt: questions upgrade ram cmt dc 7100 (please help)

    Hey all,.
    There is history... or you can just go to the section "cut to the Chase" to the bottom of the post

    The long story...
    my name is chris, and I'm trying to help a 14-year-old son, friends learn a lil more on his old pc.

    his pc has a hand and is obviously outdated, I got a bunch of old carcasses of office and let him rumage anything that would contribute to his pc. We found a total of 3 GB of ram ddr400mhz which is just below its limit of 4 GB machines.

    so I thought everything would go smoothly, it is certainly not my first ram upgrade, having built many of the old desktop computers it was inflict through, I consider myself pretty well informed on the pc and have renovated a lot of pc, same Freelancer my skills of mechanics and tokens for a lil extra cash on the side I have dealt with many a problem, repair and upgrade, since I took my first windows machine in 2000, before that I started with a commodore 64 and eventually got an apple iic when I was about 10 years old... anyway, what im getting here, is I USED to know my s#@t, but for some reason any It's evading me and google isn't offering anything on the subject.

    We planned on him to update to sp3 after have modernized their equipment as much as we can, while at the same time educate him as much as I could about how the computer worked, how to open and how to treat the components inside, it was the first time, he had never looked inside his machine or any machine besides...

    However, because of delays and the issue with the ram does not, I eventually send him home with the same stock set up, he brought to me.

    Cut to the Chase

    The problem here is that for some reason when I install 1, 2 or 3 the cards of ram 1 GB the machine do not post and triggers a series of beeps system, so obviously something isn't jiving, and I can't put my finger on it.
    I can use 1,2,3 or all 4 of his stock [256 MB ddr 400 mhz] ram cards and it will display and start with change messages memory clear system, however, when you use less than four of its ram slots, a message is launched upward during post, stating something to the effect of all the slots must contain the same amount of ram

    We are working on PC is a:
    HP DC 7100 CMT
    Windows XP SP2

    current installed RAM is [256 MB ddr 400 mhz] x 4 = a total of 1 GB

    tried to upgrade RAM parts:
    Ballistix [1 GB ddr 400 mhz] x 2 = a 2 GB total

    more

    Memory Dell [1 gb ddr] (mhz are not)

    I thought it was probably a bios thing and was about to investigate, but we ran out of time, now I'm tender hand to this community in the hope that someone here can indicate what it is I'm obviosly dominant, I really want to get his machine is upgraded because it is expessing a lot of interest in Unity3D , and scripts, ANDS I'd like see hiw cultivate these skills and I can't buy a machine, and he cannot afford a new machine, so the upgrade of its rigging with these old quarters would be the most ideal situations for him, if we cannot find out we will simply create a new rig out of my 'old' , but the 3.0 ghz core dou in his dc 7100 cmt processor is probably better than any of the alternatives in my attic... so yes this is my dilemma and I hope that some here is kind enough to point me in the right direction

    Thank you and best regards,
    Chris

    Hello:

    You must have the total amount of memory in slots 1 and 3 are the same, and the same quantity in slots 2 and 4.

    The PC will not work if you put 1 GB in slot 1, 1 GB in slot 2 and 1 GB in the Groove 3 because you're short 1 GB in the empty slot 4 and just short of 1 GB in slot 4 = 5 beeps.

    Then... If you do not have 4 x 1 GB then use 1 GB in slots 1 and 3 and 256 MB in slots 2 and 4.

    See the table below on page 16 memory configuration.

    http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287187

  • I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all

    I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all.

    I don't understand what you mean by "I can't... bus in 1333 was dominated by the toi.cam.

  • Upgrading RAM on Satellite P30 141

    Hello

    Is it possible to upgrade memory on a pro Satellite p30?

    I am currently having 512 MB of RAM and would like more (maybe another 512 or 2 x 1 GB)

    can be upgraded RAM on this satellite?
    Anyone know how to find out?

    Thank you
    brand

    Post edited by: fairness4fansCoUk

    Satellite Pro 141 is not known to me and I guess that the number is not entirely correct what laptop do you have exactly?

  • HP ENVY 23-d107er: upgrading Ram and processor

    I want to upgrade RAM, up to 16 Gb. Help me, please - I don't understand how to set the compatibility of frequency and CASE latency of RAM and motherboard (sorry for my English). My motherboard frecuancy is a...

    Memory how much my motherboard support?

    Can I install DDR4 memory or not?

    Or "the best"type of memory is DDR3L?

    SO-DDR3 16 GB (2x8Gb) PC15000 - 1866 MHz Kingston HX318LS11IBK2/16?  -1866 MHz frequency

    If my choice is wrong, maybe I could install this (also DDR3L) RAM:

    16Gb (2x8Gb) SO-DDR3 PC12800 1600 MHz Kingston CL9 HyperX HX316LS9IBK2/16 Impact black? -1600 MHz frequency

    or

    Kingston HyperX Impzact [HX316LS9IB/8] SODIMM?

    And could you give me a tip of advise on upgrading the processor?

    The only choice is i7 - 3770 s?

    Hi there @_Alexei_,.

    Welcome to the Forums of HP Support!  I understand that you are looking for more information on CPU and RAM upgrade options for your computer.  I'm happy to help you with this.

    Looking at HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-NK (Lavaca3-SB) for your computer, it lists the upgrade RAM and CPU information.

    Here is the information of supported RAM:

    Dual channel memory architecture two DDR3 SO-DIMM (204) media pins
    PC3-10600 (DDR3-1333)
    PC3-12800 (DDR3-1600)
    Memory non - ECC, unbuffered

    Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SO-DIMM (8 GB only available on systems using processors Ivy Bridge)

    Supports up to 16 GB on 64-bit computers (only available on systems using processors Ivy Bridge 16 GB)
    Supports up to 4 GB on 32 - bit * PC * PC 32-bit cannot resolve a full 4.0 GB memory.

    Also, here is the CPU of the same document information:

    TDP: Varies according to the processor
    Socket type: LGA 1155
    The motherboard supports the following processor upgrades:
    Intel Core i3-3xxxT (Ivy Bridge) Dual Core up to 35W
    Intel Core i3-3xxx (Ivy Bridge) Dual Core up to 55W
    Intel Core i5-3xxxT (Ivy Bridge) Dual Core up to 35W
    Intel Core i5-3xxxT (Ivy Bridge) Quad Core up to 45W
    Intel Core i5-3xxxS (Ivy Bridge) Quad Core up to 65W
    Intel Core i3-2xxx (Sandy Bridge) Dual Core up to 65W
    Intel Core i3-2xxxT (Sandy Bridge) Dual Core up to 35W
    Intel Core i7-2xxxS (Sandy Bridge) Quad Core up to 95W
    Intel Core i7-3xxxS (Ivy Bridge) Quad Core up to 65W
    G6xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
    G6xxT Intel Pentium Dual Core (Sandy Bridge) up to 35W
    G8xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
    G20xx Intel Pentium Dual Core (Ivy Bridge) up to 55W

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • Tecra Z40 - A - the upgrade (RAM RAM)

    Hi all

    Ordered little RAM to upgrade my Toshiba Tecra Z40 - A, but can not find, for the life of me, anything where you want to insert online.

    I previously installed RAM under the keyboard (couple of clips holding it) and on the other, a small cover on the bottom, but the Z40 does not appear to be anywhere easily accessible.

    Has anyone upgraded RAM on the Z40? Or is it a big no, no, because of the guarantee?

    Thank you
    Lance

    Memory upgrade on this model Tecra is a bit complicated and, in my view, should not be done by the owner of the laptop. For some models of Ram upgrade can be done by the owner of the laptop and exact instructions how do proposed in document s user manuals, but not for your Tecra.

    For full access to the RAM modules lower lid should be removed and it can be done by people of service only. If you do this alone you can void the warranty valid.
    I recommend you contact the nearest Toshiba service provider in your country and ask for help or advice.

  • upgrade ram from 4 GB to 8 GB of macbook pro mid 2012 will increase performance?

    Upgrade ram from 4 GB to 8 GB of macbook pro mid 2012 will increase performance?

    Please download and install EtreCheck from http://etrecheck.com/

    Run it and post the report here.

  • Portege 4000 - upgrade RAM & graphic card driver installation

    I'm having some trouble with my Portege 4000 for the moment. I installed XP on a disk, but will no longer have that I have 256 MB of RAM...

    -Have you tried 2 manufacturers but the PC133 512 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

    -Consider the options alternative to XP, 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?

    -J' put another post for .exe drivers related to the display/vga for 98SE and 2000.

    -Just for the record, not all Linux distributions seem to go back on the size of the screen, so it takes some work...

    Thanks much for any help.

    > Tried 2 manufacturers but the 512 PC133 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

    The protégé 4000 is compatible with the PC133 modules! AFAIK, you can upgrade RAM of this notebook 1 GB (1024 MB) and you can use these modules;
    PC133 512 MB (PA3108U - 1 M 51)
    PC133 256 MB (PA3086U - 1 M 25)
    PC133 128 MB (PA3085U - 1 M 12)

    > Considering alternative options to XP, namely 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?
    You can create partitions on the HARD drive using a 3rd party like Partition Magic 8 tool. I use this tool and it's really nice.
    After you create 2 or three partitions on the HARD disk, you could install different OS (operating systems).

  • Upgrade Ram on a Netbook NB200 - 00L

    I gave to my two daughters a Netbook Toshiba NB200 - 00L. Both came loaded with Windows 7 Starter. If I just upgrade to Windows Home Premium, it will slow down computers. I was told that the maximum ram that can take netbooks is 1gig. However, I keep seeing that people are upgraded to 2gigs. I want to upgrade the ram so that Windows Home Premium will work better. Can someone enlighten me on this subject. Upgrading ram Home Premium support will be more effective? Also, is anyone Home Premium running on their netbooks without upgrading, and it is really slow? Thank you

    Hello

    AFAIK NB200 can be upgraded to 2 GB of RAM. Therefore, you can check the specs on the Toshiba site!

    I m not NB200 owner but I improved my other laptops equipped with modules from Kingston. I've never had a problem with these modules. They always run stable and don t make problems.

  • Tecra 8100 - upgrade RAM

    There was a discussion here ("Tecra 8100 - upgrade RAM") on the upgrade memory.
    He said that for TECRA 8000 - capacity maximum 256 MB memory (2 x 128). (unlike TECRA 8100 - which can be upgraded to 512)

    Does anyone know if the BIOS change may allow 512 MB with TECRA 8000?

    Thanks in advance,
    Piotr

    Hello

    I don t think that after updating the BIOS on the Tecra 8000, you will be able to use the 512 MB of memory.
    Like you said you can use max 256 MB (2 x 128 MB SDRAM)

  • Is it safe to upgrade RAM from 4 GB to 16 GB on mid2012 13 "MBP?

    It's time to upgrade RAM and OWC claims it is safe to upgrade to 16 GB on my mid-2012 13 "MBP with 2.5 GHz processor Intel Core i5 and 500 GB hard drive, but everything on the Apple site indicates upgrade max is 8 GB. I want speed, but worry, it could be too much for the material.

    Anyone else tried the more memory RAM successfully?

    In theory this is your memory needs:

    Maximum memory (Real) 16 GB 8 GB (Apple)
    Memory locations 2-204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM

    The answer to your question is that you can upgrade to 16 GB. Because it depends on the machine itself, we cannot assure you that it is "safe". It may work or it may not work. This isn't a certified Apple upgrade. It is rather an upgrade coming OWC. They sell RAM for this upgrade. Other vendors such as DataMem and Crucial RAM probably do not sell 16 GB upgrade kits.

  • Upgrading RAM on Satellite L670D-106

    Hello world

    I want to ask about upgrading RAM for laptops,

    I have the Toshiba Satellite L670D-106 want a change from 4 GB to 8 GB. In fact, I have 2 x 2 GB 1066 MHZ Ram inside. What Type of RAM can itake max? 1066 or 1300 or 1600 DDR 3?

    THX for your answers

    Toshiba offers modules to 4 GB compatible and tested for your machine and there PA3677U-1M4G part number. Check the specs of this module and pick up info that one you can use.

    Please note: a lot of people are trying to use some modules cheap and later report here on this forum about the issues so I highly recommend you to obtain 100% compatible RAM.

    See also the page of Kingston. Kingston offers quality and compatible modules for Toshiba laptops.

Maybe you are looking for