Upgrade the screen on Satellite Pro C50 - A - 1 K 9

Similar Questions

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• Replacing the screen for Satellite Pro L10

  The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

  How much would a complete hull and the screen?

  Where can get me a - Toshiba service center my best bet?

  Hello

  The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
  But unfortunately, I do not know what will cost repletion.
  This information you won't get form the Toshiba service partner in your country.
  I recommend you ask the service partner.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• How can I fix the screen on Satellite Pro L300?

  How can I fix my screen Satellite Pro L300? I went by mistake about it.
  Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.

  The glass is cracked? You see the flow of liquid crystals when you move the screen?

  If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.

  An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP

• Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

  Hello

  I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

  My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

  If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

  Thank you very much

  Cblack

  Post edited by: cblack

  Hello

  just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
  We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

  It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

  Would appreciate comments on your part.

  See you soon

• Can I upgrade the CPU T2310 Satellite Pro L40 - 15A series laptop PC?

  Hi, (I apologize if this has been asked before, but when I search 'Satellite pro l40 series' I couldn't find any relevant response)

  I've been looking around the net & found contradictory answers to this question so far, so I hope that this forum may be able to help.

  I have a 15 D portable computer Satellite pro L40 and I want to upgrade the processor Intel Pentium Dual-Core 1.46 Ghz T2310 an Intel Pentium Dual-Core T4300 2.1 GHz 1 MB 800 CPU or something similar.

  I found the following issues http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html

  "f consider you a CPU upgrade, there is not a lot of options." The Intel GL960 value express notebook chip supports only up to FSB 533 Mhz processors. So, does not allow most of the Core 2 Duo CPU update (with 667 MHz). "

  But then, I also read that the GL960 can run 800 MHz processors?

  I also asked the question on ebay to the seller of the CPU T2310 & received this response

  «SHOULD be OK, but your T2310 533 Mhz FSB and the T4300 has 800 Mhz.»

  Motherboards intel more modern should easily accept a 800 mhz cpu, but I cannot guarantee. May be an idea to see if you can find out if there are other models of Toshiba L40, also with 800 mhz chip, because it would be a good indicator.

  And if I can't pass a T2310 because of the 800 mhz too is their a 533 mhz cpu that will be compatible & more powerful for audio production that my current Ghz CPU T2310 1.46.

  I've only had this PC 4 years again, it seems not to be very mobile friendly if this resource could not be designed to handle upgrades.

  Thanks for the tips.

  Post edited by: ib1

  Problem is that upgrading the CPU is not taken in charge and everything you do is at your own risk.
  See also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• How to adjust the brightness of the screen on Satellite Pro A40

  Hello everyone
  Im am an old aged pensioner and I have just started with a needle of the second Pro A40.

  The problem I have is the screen is very bright and I would come down the brightness, can someone help me please.

  Thank you Ken

  Hello

  It's very simple.
  Computers laptop Toshiba supports a FN functions.

  If you want to adjust the brightness to a lower or higher level press simply FN + F6 or FN + F7 and the brightness of the screen will change ;)

  Check :D

• Replacing the screen on Satellite Pro L20

  Is it possible to replace a L20 screen with a screen of an L10?
  The two 15 "screens but are the same connectors.advice would be appreciated.

  Hello

  Googling around, I found several online shops where you can order that LCD for L10 and L20 is listed as compatible model. One of them is http://www.notebookparts.com/products/description.php?II=11427

  So I think you can use this view to replacement.

• Set the screen brightness Satellite Pro 4200

  Hello
  I heard a key combination that makes possible the setting screen brightness.
  Is this true and what is the key combination?

  Yours sincerely
  Riedlz

  Hi Daniel,.

  Normal for thie keys Fn + F7 to increase brightness and Fn + F6 to decrease. But the different laptop models use different key combinations, so I would check your user manual to see which ones is correct for your laptop.

  Kind regards

• Satellite Pro C50 - How to extend desktop to 3 monitors?

  Hello; I am trying to extend the desktop to three screens with Satellite Pro C50.
  Please, what can I do?

  As far as I know something like this, you need additional equipment. I assume that you need USB display adapter.
  Solution could be multi-monitor adapter Matrox TripleHead2Go Digital SE or similar device.

  Google around a bit and I hope that you find a device that you can use with your laptop.

• Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

  Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

  I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

  I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

  Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

  I have a Toshiba Satellite Pro C50 - A - 1 k 9.

  Thanks in advance.

  I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

  Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

• Satellite Pro C50 - A - screen Black/Brown problem

  Hi all

  I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.

  I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.

  Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.

  First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.

  The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...

  I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.

  * Are there known error, malware or fault in laptops that could help me? *

  I thank very you much in advance!

  To be honest I have don recovery think t install image will help you.

  I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.

  In the past, some people have reported on similar problems, and the reason was bad FL inverter.
  The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help.

• Re: How to install Windows on the new Satellite Pro C50 8.1?

  I just bought a TOSHIBA SATELLITE PRO C50, that came with Windows 7 pre-installed.

  When you start the system for the first time, I simply close and put Windows 8.1 media into the optical drive (disc 1 of 4) then entered the Recovery Wizard and may have chosen the wrong option, because I completely erase the hard drive and partitions.

  Now that I did it, I can't find how to install the Windows Media Pro 4 DVD provided 8.1. I can't find the correct option to do this. I changed the startup option in the control panel by pressing F2 at startup, so it reads from the DVD player. The DVD starts but then takes me into a recovery area of the system, which is not good as I wiped the system completely.

  How can I just now to install the Pro 8.1 provided Windows on the clean system right now?

  Thanks for any advice.

  First, I would like to know what model of laptop you have exactly. If possible, please report the entire model number (C50-xxxxx). I just want to check the specification for this model of laptop.

  Did you buy this laptop as any new product and model in box?

  Anyway, if you have installation discs original recovery for this, you should be able to install it without problems. Start your laptop and press F12 to get into the boot menu. This menu wil shown on the screen, insert disc 1 into the optical disk drive, choose the CD/DVD drive from the menu, and then press ENTER.

  ODD must start reading Wizard disk / recovery will be shown o the screen. Choose the option to install out-of-box / factory settings and just follow menu on the screen.

• Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

  Hello

  I own Satellite Pro C50-A-1E2.

  Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
  I am trying to get into the BIOS but without success.

  I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

  I found this piece of information through Googling: "press f2, and then press power. But always without success.
  Help with my problem?

  Thank you.

  Hello

  Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

  Check it out.

  By the way: for some series laptop, press INS key then F2 worked too.