upgrade to labview 2013 problems now with labview 8.6

Similar Questions

• LEGULAR PROBLEMS NOW WITH FIREFOX WHICH IS PAST?

  I TRIED TO GO BACK TO THE FORUM FOR SUPPORT QUESTIONS ETC. I HAVE READ A SIMILAR PROBLEM there DECLARE YOU ARE to APPLY to https://support.mozilla.com/enUS/question/new (I HAVE TRIED THIS AND SHE STATES ERRO R. WHY TIENT_ we SUDDENLY ALL THESE PROBLEMS WITH FIREFOX?)

  The link to ask a new question is: https://support.mozilla.com/en-US/questions/new (note "issues" not "question")

  The link to the forum where you can view previously asked questions is: https://support.mozilla.com/en-US/questions

• Problems now with drivers audio T7500

  Hello

  I have now lost my sound drivers SOUNDMAX perhaps since a Win 10 update.

  Where can I get the right drivers please?

  I use Cubase and hearing and the two cannot get a driver to record.

  Very strange cause it was always great.

  Oz

  This PCIe x 1 card could go in the slots, 12, 15 or 17. No white 11 or 13. 14 and 16 are reserved for video cards.

  

• Problems with PCI-7811R after upgrade from LabVIEW

  Hello

  I have been using a PCI-7811R under LabVIEW 8.2 for quite awhile without difficulties. However, I just upgraded to LabVIEW 2009 and it seems to have stopped working.

  I tried to run old code (that worked before) and I get the attached error. I try and locate the PCI-7811R in MAX ver 4.7.7 and he's not here.

  Any suggestions?

  Gary

  
  

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• Purchase / upgrade of LabVIEW with more Sound and Vibration

  Hi, supporters OR Forums,

  I'm new in LabVIEW but I'm working on a project that needs to use LabVIEW in these toolkits: DAQmx, PID and then Sound and Vibration Control.

  In order to experience on the vibrations, I need to use screws of Suite Sound and Vibration, which was not purchased in my Institute. We had the license for LabVIEW 2009 SP1. Unfortunately, I have a VI file written in LabVIEW 2010 my partner. According to the records of view VI, there is a lack of following screws:

  -SVFA Power Spectrum.vi
  -Application Directory.vi
  -SVT FFT .vi spectrum (Mag-Phase)
  -Frequency response (Mag Phase) .vi SVT
  -SVFA amplitude and Phase Real and Imaginary.vi
  -SVL get spectrum subset.vi
  -SVT UFFT58 write.vi
  -SVT UFFT58 write record 6 vi
  -SVT HFFT58 close file.vi

  I would like to confirm if these screws are supplied in the detroit and Viration Suite or / and other toolkits. If all of them can be found in the following Sound and Vibration, what I have to do is to buy the offer away from NOR, is it not? How much should I pay for this Suite.

  On the other hand, if we upgrade from LabVIEW 2011 (which is said to be able to deal with better timer - for the function of data acquisition), how much in total so also buy us more Sound and Vibration 2011.

  In comparison, which of the above two options is preferable in terms of price.

  For your information, I am working on my thesis at University in this means we would like to have a university degree.

  Plesea give me ideas on this subject. I'm sorry if my post is not fit to be posted here but I sent 2 emails to NI Germany (1 for the customer on the Web page Service NOR) and 1 in the Sales Department, but there is no response after more than 3 weeks.

  Thank you very much.

  Kind regards.

  Thinh Vo

  Hi thinhvo,

  All of these VI are included in the Suite Sound and Vibration, which means it's the only additional package that you would need to buy.  On the site OR in the States, the Sound and Vibration Measurement Suite USD $4119 costs.  Since I'm an applications engineer, I'm not in a position where I can advise you on the price, and I am sorry to say that it will be easier for you to contact your engineers in sales in Germany (I guess you are in Germany).  You may have better luck calling into lines of support rather than by e-mail.

  Thank you

  Lisa

• I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  Yes, it is better to update the old Mac EC.

  Make sure that you back up the old Mac before the upgrade.

  Note the application of some may require updated to work with CBS. To check see it:

  https://roaringapps.com/apps

  Also, some devices may require updated drivers and for some devices such drivers do not exist.

• I got this update of Windows with the strange name of nonsense, what is it. I have problems now.

  Having problems with streaming video download.

  Edit community moderator: Original title was:

  «I had this update of Windows, what is of gYxseNjwafVPfgsoHnzLblmmAxZUiOnGcchqEAEwjyxwjUIfpXfJQcdLapTmFaqHGCFsdvpLarmPJLOZYMEILGNIPwNOgEazuBVJcyVjBRL.» I have problems now. »

  gYxseNjwafVPfgsoHnzLblmmAxZUiOnGcchqEAEwjyxwjUIfpXfJQcdLapTmFaqHGCFsdvpLarmPJLOZYMEILGNIPwNOgEazuBVJcyVjBRL

  I got this update of Windows, what is it

  It was wrong by Microsoft has released an update of the test which was pulled from the servers several days ago...

  Copy/paste of Susan Bradley - volunteer here not not an employee of MS post in http://answers.microsoft.com/en-us/windows/forum/windows_7-update/windows-7-update-appears-to-be-compromised/e96a0834-a9e9-4f03-a187-bef8ee62725e?page=4

  QUOTE

  Microsoft updates have specific self-signed certificates provided by Microsoft.  What happened here was the Oops man.

  Don't panic: by mistake, Microsoft released a patch from Windows Update 'test ' | ZDNet:
  http://www.ZDNet.com/article/Microsoft-accidentally-issued-a-test-Windows-Update-patch/

  "A Microsoft spokesperson confirmed Wednesday that he had"bad published an update of test"and that it is withdrawing."

  END OF QUOTE

  =========

  See also: http://www.pcworld.com/article/2987973/security/microsoft-accidentally-releases-windows-7-test-patch-freaks-out-users.html

• I've updated the plan of the photographer and since the download, I had problems nonstop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or should I cancel

  I've updated the plan of the photographer and since the download, I had problems with non stop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or do I cancel my subscription to the CC and return to the CS6?

  The problem of fluidity can be the result of a graphics card problem:

  Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.

  On the bridge: when you select an image and press the space bar, what happens?

• Hi, I bought a CS.5.5 in 2011 and an upgrade to CS6 in 2013. Now on my Adobe ID I see only the serial number C5.%, but I need the number of the CS6 series. You want to do?

  Hi, I bought a CS.5.5 in 2011 and an upgrade to CS6 in 2013. Now on my Adobe ID I see only the serial number C5.%, but I need the number of the CS6 series. You want to do?

  Hi Janine.

  Please check the help below document:

  Quickly find your serial number

  In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts

  Kind regards

  Sheena

• OS migration is no problem for Upgradation(8.0.4-11gR2) DB with Windows

  Dear all,
  
  I'm collecting documents and information to a downgrade to the latest version 11 GR 2.
  
  The current version of the database is 8.0.4 out support for Oracle version. his lies in Windows 2003 server.
  
  What is the best way!
  
  (1) set at the operating system level and the database upgrade
  
  or
  
  (2) upgrade of the GR 11, 2 with the same OS (WIN2003) DB, then migrate the DB to the new Windows Server 2008 operating system.
  
  Nobody tells me how far I have to go for the points mentioned above.
  What are the risks if I point 1! and what will happen if I'm the point 2. Does the GR 11 2 BONES in this way 2 to approach support!
  
  
  Waiting for your comments and advice.
  
  
  Concerning
  Hamid

  Hamza says:
  Thank you Srini & Mr.Helios,

  Sorry for the late reply because of the Eid.

  Yes, you, the experts are correct. I will modernize the DB, so I'll go for the OS migration.

  DB size all is 20GB and the customer can in down time up to 48Hrs, moreover, I want to make sure about the location of the scripts to manually upgrade at 8.0.4 in 8i DB.

  I would like to discuss the old topic, I shared in the same blog on scripts and migration paths.

  8.0.4 - it's the basic version of the DB. in running u0800040.sql the DB will change its version 8.0.6
  8.0.6 - this new version, should I upgrade to 8.1.5 db (8i) by running u0800060.sql

  It has bee a long time because we are all dealt with 8i - I don't remember if simply run u0800060.sql will spend 8.0.x to 8.1.x.

  8.1.5 - script u801050.sql replace his version 8.1.7

  Same comment above applies.

  8.1.7 - by a patch 4547803 the 8.1.7 DB will become 9.2.0.8

  You will need to install 9.2.0.1 in another ORACLE_HOME first, then apply 9.2.0.8 patch for the HOME 9.2.0.1

  9.2.0.8 - by patch 10404530 we can direct upgrade to 11.2.0.3

  Once again, you will have need to install 11.2.0.3 (if t is now available for Windows) in an another ORACLE_HOME.

  >
  >

  Dear Srini kindly varify what above and let me know where can I get the .sql scripts I mentioned above.

  Concerning
  Hamid

  All this looks and feels unnecessarily complicated. An easier approach would be to perform a full export of 8.0.4 and uninstall the 8.0.4 Oracle software. Then upgrade the operating system as needed, install 11.2.0.3 (or 11.2.0.2) and perform a full import. A 20 GB database is really small and your window of 48 hours should be plenty. I would recommend that practice you all the steps on a server to test if possible.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e23633/expimp.htm#i262220

  HTH
  Srini

• After having upgraded to Firefox 24 it now won't start at all after clicking on the icon. My OS is Windows Vista premium. It will start in safe mode.

  Upgrade to Firefox 24 and now nothing works at all despite uninstall it and reinstall several times and lose all my favorites etc. However, it does not start in safe mode. At first, I thought it was my Norton 360 Security, but after 2 hours in contact with them, I'm still in the same position. When I double click on the Firefox icon I see the moment where the cursor and then it disappears and nothing loads.

  My OS is Windows Vista Premium and I use Windows internet explore for the time.

  HELP Please!

  Thank you nellus91.

  I used the Microsoft Safety Scanner first, and it found nothing. I then used TDSSkiller and he found the problem.

  Problem solved.

  Thank you.

• Satellite A110 Upgrade - Xpress 200 M problem, lost Toshiba Software

  I own Toshiba Satellite A110-110. After using this laptop for a period of two years with pre-installed system, CPU and RAM, I decided to update. So, I change Celeron M410 for a Core Duo T2450, 60 GB HDD for a HARD drive of 250 GB and 512 MB of RAM to 2 GB of RAM and Windows XP it for a Vista Enterprise.

  Installation of all parts and software went well. Then, I downloaded and installed the drivers for Vista. So what's the problem you could ask?

  An ATI Xpress 200 M, could get up to 256 MB of graphics RAM on Windows XP, now with Vista, this graphics card in the Panel displays only 128 MB (shared) memory got. Is there any option to change the settings and have the old 256 MB. Maybe someone knows the solution?

  As the second main problem after that the upgrade of my personal system is total lost all Toshiba Utilities like connectivity, Wireless LAN search doctor (transparent oval radar hide on the right side of the screen with other options), Panel of SRS WOW Sound and others who were in Office Setup.

  Vista does not appear all that I put in the system, some of them. If someone can help fix this problem and know where I can get this kind of software would you please give me a tip and write what kind of idea, you are able to share.
  Thanks for any help!
  Alex

  As already suggested Homer shared memory cannot be manually set to a higher value. Everything works automatically and the graphics driver control and assigns the amount of shared memory
  In addition, the shared memory value max depends on available main memory.
  The high value of the main memory, the upper value of the shared memory could be used on laptop computer A110.

• Should I upgrade to 5.1 or stick with 4.4.4?

  Hi people.

  I have a motorcycle of first generation X, and I'm trying to decide whether to do the upgrade of KitKat Soother (5.1). I'm really happy with the phone, as it is currently: it does the job, the works of battery in my case, and I have almost no complaints. By reading the forums here and elsewhere on Lollipop, many people suggest the problems they did not with KitKat. More serious both seem to have a memory leak that forces the phone reboots from time to time and battery drain problems. I don't have any of these problems now. Lollipop benefits seem to be a pretty interface, a new notification system, a gesture of flashlight chop and some other features of whizbang. None of those who are important to me, especially not at the expense of stability of life or phone battery.

  Is there a good reason why I should update? I think seriously sitting this one - it seems that I would take a number of headaches for no real gain is worth it.

  What are the opinions of the people? Is an upgrade to 4.4.4 to 5.1 on a Moto X 1 St gen is worth? Are there disadvantages or risks for not updating?

  Thank you!

  Well, for me, I tried the update of Lollipop. It brings with it many improvements and Kit Kat did not work so well for me. There are many nice settings. If you have no experience with Lollipop, you can not miss them. To address your specific concerns:

  Battery drain: for me, the battery life has improved. I got lucky to get 1-1.5 hours before time screen. Now, I did a factory reset before update and don't have a lot of these applications, I had installed, reinstalled which can further contribute to the improvement of the actual update. I don't have enough data to say. I know the battery life was better for the next day between reset and get the update. Intelligence Unit doesn't seem to be in the list of battery sometimes, but I always get 2-3 hours time screen, easily.

  Memory leak: it's a problem in the first versions of Lollipop (5.0, for the most part) for Nexus devices. I have not encountered the problem on my Moto X. I think that the problem is fixed for the 5.1.1 on Nexus devices and I can tell is not present in this version 5.1 for the Moto X.

  For the record, it seems that the chop for the gesture of the flashlight is for the 2014 X only. Or at least I have not found where to turn it on. Still, it is nice to have a handy flashlight toggle.

  Before the update, I have a list of things that I was looking forward to lollipop. Here's my blog if you are interested:

  http://plasmoidia.blogspot.com/2015/06/why-i-want-lollipop-on-my-phone.html

  Keep in mind that updates often solve security problems. I'm not aware of anything specific to Kit Kat, but I felt that I should talk about.

• Try to upgrade to SP3 SP 2 happens with c:\windows\system32\ntdll.dll

  original title; Try to upgrade to SP3 SP 2 happens with c:\windows\system32\ntdll.dll I closed all programs including Avast and always happens with this note. What can I do else?

  Install Windows XP on the partition, BootCamp by Apple. Initial installation required XP SP2, but now I need to update of bootcamp, but I need to upgrade to SP3 before that I can. So I get above mentioned note program c:\windows\system32\ntdll.dll running where can I find other programs which may be executed I don't physically see in the Task Manager?

  Hello

  Please follow the steps mentioned below and let us know if that helps you.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: You can lose data while eliminating malware.

  Also check if your system has been hijacked:
  http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Step 2: Run System File Checker.

  (a) open command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  (b) type the following command and press ENTER:
  (c) sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Step 3: Download Windows XP SP3 manually Microsoft Web site and save it to your desktop:

  http://www.microsoft.com/downloads/info.aspx?na=41&SrcFamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&SrcDisplayLang=en&u=http%3a%2f%2fdownload.microsoft.com%2fdownload%2fd%2f3%2f0%2fd30e32d8-418a-469d-b600-f32ce3edf42d%2fWindowsXP-KB936929-SP3-x86-ENU.exe

  Disable the security software and implement the system in clean boot. After that, run Service Pack 3 installation by double-clicking on the file that you downloaded.

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353

  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode. Be sure to activate security software after installation and the system.