Upgrade to version 4.0 beta, should I completely remove Firefox 3.6 now?

I just upgraded to firefox 4.0 beta but I see that firefox 3.6 is still on my machine. Several of my modules will not work with it. The Aardvark, Adblock Plus, Tracker gains eHow, Microsoft .NET and WOT, all are incompatible with version 4.0 beta. But when I try to reopen the old format, that it is only as the foxfire 4.0 beta. How can I change back to my modules will work or should I keep just the version 4.0 beta and it is possible to work with it? Thank you

Firefox 4.0 beta 1 is a version of 'Tester' for what will become the next major release of Firefox - in like 5 or 6 months. You should not use it at all unless you want to 'test' and report problems that you found.

Uninstall it and use 3.6.8.

Tags: Firefox

Similar Questions

  • I tried to install the beta version of Firefox 11, after installing it says restart, well I reboot and it keeps asking me to reboot? then I completely remove Firefox and he always asks me to reboot? any help

    I tried to install the new beta of Firefox 11, when it was finished, he said that I had to reboot, so I rebooted and it asked me to restart again and again and again! then I deleted Firefox thinking I'll start with a blank slate, although he always asks me to restart any help?

    You can try to reboot after deleting the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

    The beta version can be installed in a different program folder, you may need to check this.

  • I installed beta 2, and it froze on the epub add on. I uninstalled is installed again the same thing. uninstalled then installed 1.1 epub removed then uninstalled and reinstalled beta 2. everything freezes on the 1st page. I can COMPLETELY remove to reins

    I installed beta 2 of FF4 and initially it worked fine. Then I went to add ons and it froze in fullscreen with epub. I have the screen shot so its all good. It sfull screen and symbol RSS feed at the top left of the screen then below Whats new - epub reader Version 1.3.0.3 then below which its says of bug fixes in some cases FF4 crashed when an ebook with epub reader has been loaded and tabs where switched.
    Anyway, I uninstalled the beta version 4 then installed 1.1 and removed the epub reader. Then reinstalled FF4 B2 but it hangs right on the opening.
    For short holder, I used 2 Beta it seemed wise great speed over previous versions.
    I think if I had to be able to been completely remove firefox and do a claen install it can work.

    Looks like you are using Firefox for Maemo (Nokia N900).

    If you want a completely clean install, you can get rid of your old profile by typing this command in the X Terminal app before launching Firefox:

    .Mozilla CD; MV fennec.bak fennec

    (Who will move your profile in a backup location, so a new will be created. This will hide your bookmarks, history, cookies and Add-ons, but you can restore the old backup profile if you wish.)

  • I'm on windows 7 and I upgraded to 10.0.2 and now it does not open. I completely deleted firefox and transferred again, and it does not work. So my last attempt, I removed firefox 10 again and downloaded the beta version and once more nothing.

    I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?

    -Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!

  • I got a message to say I should upgrade to version 11, but when I try I thought my version is so far tp - i.e. version 10.0.2 running on Mac

    I am running Firefox on Mac OS 10.6.8 10.0.2. Get the message that I had to upgrade to version 11.0, but when I try Firefox says that my current version is up-to-date

    Sometimes the updater becomes confused, in this case, your best option is to go to www.getfirefox.comand download and install Firefox 11 from there. You can do it just on your current installation and not your personal data will be affected.

  • Upgrade to version 6.0 SourceFire Module questions

    We have just implemented SourceFire Module version 5.4.1 on our ASA recently, but want to upgrade to version 6.0. I've been through Notes version 6.0 for the upgrade, which are dated to November 2015, but had a few questions that I was hoping someone here could answer:

    -Our FireSIGHT Management Center is a virtual appliance of 64-bit. Can we install version 6.0 on a virtual appliance VMWare running on EXSi 6.0? The only issue date list 5.1 and 5.5 ESXi ESXi.

    -Should what files I use for the update? The Release Notes say to use "SourceFire_3d_Defense_Center_S3_upgrade - 6.0.0 - 1005.sh. My choice on Cisco's Support site are: asasfr-sys - 6.0.0 - 1005.pkg, asasfr-5500 x-boot - 6.0.0 - 1005.img and Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh. I guess the sys-asasfr - 1005.pkg - 6.0.0 is for CME, and the Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh is for the ASAs.Is that right?

    -How long will the update for FMC and ASAs? The ASA is a 5516 x and the release notes look like they say that the update will take about 41 minutes.

    ESXi 6.0 is not officially supported so that your experience may vary. If you get stuck, you may TAC by telling you that you're on your own.

    "Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh" is used to upgrade the fire ASA power module in the Manager of firepower.

    If you were a fabricated construction or reimage then you would use the boot images and sys respectively.

    41 minutes for CME is right. As mentioned Philip, 2 hours is a better estimate of the ASA module, especially on a smaller area as the X 5516.

  • With the help of OS10.4.11. No plans to upgrade the system, which means that I can not update firefox - my favorite browser. To do this, I should no longer use Firefox? I have newer computers but want to use this machine for some projects.

    Concerned about the future of firefox since stability I cannot and does not level the operating system on this Mac. Using Firefox 3.6.24 and during a recent update of firefox, I was warned) 1 could not upgrade with the current operating system, and support 2) will end soon. What does that mean? Should I stop using Firefox as my browser?
    Thank you.

    Firefox 3.6.x is the latest version of Firefox Mozilla for Mac PPC and 10.4.
    http://www.Mozilla.com/en-us/Firefox/all-older.html

    For older Macs that are not considered supported in versions of Firefox 4 +, try TenFourFox for PowerPC in performance Mac 10.4.11 and 10.5.8.
    http://www.floodgap.com/software/tenfourfox/
    http://tenfourfox.blogspot.com/
    https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

    [The-edmeister] Thank you for the answer (I have a Mac 10.4)

  • Firefox crashes after upgrade to version 8.0.0

    Under XP. had no previous with Firefox problem until I upgraded to version 8.0 today. Now, Firefox crashes immediately to start the browser and open the crash reporter. Also crashes in safe mode.

    Your crashreport:

    https://crash-stats.Mozilla.com/report/index/BP-29aec938-779e-45CD-83f6-238ca2111109

    8.0 Firefox crash [@ DbgBreakPoint]

    This seems to be a Roboform. Install the latest version of Roboform 7.6.2 should solve this problem according to the related Bug 691271.

  • Upgrade to version 4 but the features are not not like version 4

    A few days back I have upgraded to version 4 of Firefox. But the page is not quite the same as showed/displayed by the Mozilla site.

    There is at the top left tab "Firefox" with menu drop-down.

    On the other hand, all my previous toolbars and tabs are present.
    It should be noted that I have not uninstalled and reinstalled the
    program - me. Also I will have no problem to use worm. 4
    in the opposite case.

    I'd be happy if someone, please, explain the phenomenon.

    I forgot to mention that the Firefox icon will be shown by default in Vista and Windows 7 PCs. users XP will be out manually.

  • How to have 2 versions of iTunes? Should I update?

    I have several Mac I use for the production of the show / audio - I prefer 10 v interface and the latest versions of vs and this is what I have installed on Snow Leopard, I prefer to allow the use of old audio software more stably.  Question is, since apple made iTunes the means of transfer of audio data on or off of an iphone, I have to run the latest version of iTunes to do any seized of, say, a simple ringtone for example - on my iphone running ios 9.1.  So I don't want to upgrade iTunes to 12, so what can I do to have a version of iTunes 12 co exist on a machine that can also run iTunes 10... ?  What I have to sacrifice just version 10 on one machine just devote a copy of iTunes 12 to interact with my iphone.  No doubt this means that I also have to launch at least v 10.8.5 on this machine in order to run itunes 12...  It seems tedious and cumbersome to say the least.  If I like an older version of something, why should I give up?  It is absurd that I have to go at this point to put a stupid ringtone on my phone.  Rant, just to search for the path of least resistance to achieve.  The only way I found so far is to force an upgrade of a machine JUST to run the latest version of iTunes - because they have made obligatory to be able to synchronize any iPhone with a mac, period.  Or am I missing something?  Thanks for all the ideas,

    Mike

    We have to abandon the 'old', because unlike the ricer in your great-grandmother of 1902, which can always be used to crush the potatoes today, digital technology is much more complex.  The elements are replaced by something new every 6 months and does not interface with the former because of the very different capabilities. It is simply the way of the 21st century.  Either that or do what I do which is not buying an iPhone, or iPod or iPad, or use new software, be patient with very slow web page rendering and continue to use a computer for 14 years with iTunes 7.5 which is solid as a rock.  Convince everyone not to jump on new technologies so fast and maybe the world electronics companies will change their habits. Good luck.

    Only one version of iTunes can run on a computer at a time.  Since you're using iOS9, you are in a bind if you use iTunes to synchronize because it requires iTunes 12.3 +.  I guess you could learn how to use your iPhone way more limited without iTunes.  With the advent of the game, the music of Apple and iTunes Store purchase download again (if you buy your stuff from them) traditional synchronization is not as critical.

    A library opened by a newer version of iTunes can no longer be opened by an earlier version so even if you can run two iTunes you should have two libraries (you can share multimedia files however).

    Perhaps you could implement something fancy such as running a virtualized version of Snow Leopard server in an environment of Mountain Lion +. I think you might be able to run a separate version of iTunes like this.  Either that or configure a system dual boot where you start at one or the other (a little annoying) if necessary.  Or buying a second computer (I have 2, one with the OS Tiger and the other I'm going to put up with the Mavericks + Snow Leopard server).

  • Works with Windows XP SP2 with IE8. A Norton 360 process ccSvcHst.exe CPU consumption. Upgraded to version 4.0.__Now IE8 Norton is very unstable, different processes consuming CPU even with turned off Norton. __

    I opened a folder support with Norton a couple of days, for a problem with ccSvcHst.exe cripling process my system by consuming my CPU.  I found that it was a common problem, and so I wanted Norton to solve.  Their guy accesed my remote system support and made a few changes to my configuration utility and my registry files and then upgraded my version of their latest version 4.0

    After the end of the support session, I finally restarted my system and encountered an error on my configuration utility being in a State of diagnosis, then that I should put it in a normal mode and restart again.  I noticed that it had disabled the start of my services.  I selected a normal startup and restarted.

    The problem with ccSvcHst.exe consuming my CPU is now resolved - be replaced by different processes consuming my CPU and use of extremely heavy memory (or misuse).  Faulty processes are mostly explorer.exe and iexplore.exe.  Not only that, but this current problem exists even when I turn off Norton.  I tried you connecting another deal with them, but they will not address the issue, since the problem (now) exist even without Norton running.  So, basically, they made the problem worse and then pushed him on Microsoft to resolve the issue.  It's really nice...

    Anyone have any ideas?

    It seems that your computer is infected. I get this from the fact that iexplore.exe (Internet Explorer) is running. If you haven't started IE yourself, then it is a clear symptom of malware infection.

    Through these generals the malware removal not systematically - http://www.elephantboycomputers.com/page2.html#Removing_Malware

    Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

    http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
    http://tinyurl.com/yoeru3 - download link and further instructions

    When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

  • Windows Live Mail 2010 has been automatically upgraded to version 2011. How can I install my Live Mail 2010 contacts and Outlook Express?

    Windows Live Mail 2010 has been automatically upgraded to version 2011. How can I install my Live Mail 2010 contacts and Outlook Express?

    Am operating Vista and you have copied the list of Contacts of Outlook Express on the desktop.

    Windows Live Mail has its own site support and forums at the Windows Live Solution Center . They can help you better can we in this forum of Windows.

    For help on Windows Live Mail, a good starting point is the Portal Client Mail .

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Upgrade NAC version 4.1 (3) to release 4.7 (1)

    Hi all

    We have two CAM and two aircraft CASES. The two pair of them work in mode high availability.
    We must upgrade to version 4.1 (3) for version 4.7 (1) so, as I read, we should put on 4.7 (0) first before moving on to 4.7 (1).
    Now, I would like to know how can I spend 4.1 (3) to the 4.7 (0)? This done by the same steps of the upgrade to 4.7 (0) 4.7 (1) by inserting a CD in the CASE and the cam and continue with the steps to upgrade?

    Also, I would like to know if the configuration of the existing version (4.1 (3)) will be lost after the upgrade or not?

    Thanks in advance.

    Kind regards

    Heba

    Heba,

    4.7.0 and 4.7.1 both require CD installs, in other words, you will need to put the CD of 4.7.0 first, restart and get us to open.

    Once it is on 4.7.0, you will have to put in the CD of 4.7.1 and do the same thing.

    Updates will give you the option to upgrade, so when you choose that, you will not lose your settings or are.

    HTH,

    Faisal

  • HFM upgrade from version 4 to 11 - upgrade manual

    Hello

    I hope someone can give me some advice.

    I need to upgrade my version 4 Organization HFM environment to version 11 and intend to do it manually by the export of all structures (metadata, rules, data forms, reports of studio financial information etc) and old and important environmental data in the new environment. I want to do it this way because the path to upgrade by using the copy of application tool is not sufficiently transparent for me and our implementation is not so complicated and big.

    I'm sure that I can pass the metadata file somehow and the rules file so that it will work properly in version 11.

    However, I am concerned by reports of Financial Reporting Studio.

    Anyone know if I can just export them from the old version and import them to the new? Or how can I make without make version 4 to 11 through version 9?

    The schema update utility will work or I even be able to import these extracted reports?

    Thanks in advance for your answers!

    Hello

    For the reports of the FR, the former export and import in new should work OR you can use Lifecycle Management to migrate

  • I have a new iMac and used the disk to install version 6 of photoshop, but I have upgraded to version 12, but its installed version6. How can I get version 12? I tried to uninstall, but it does not ask the serial number version 12. Thank you

    I have a new iMac and used the disk to install version 6 of photoshop, but I have upgraded to version 12, but its version 6. How can I get version 12? I tried to uninstall, but it does not ask the serial number version 12. Thank you

    If you want version 12, then you don't need to install version 6, you must install version 12.  If you are really talking about Photoshop Elements, not Photoshop, then the link below, you should get to the download.

    PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

Maybe you are looking for